Indirect automatic atomic absorption determination of sulphate based on its precipitation with barium

A continuous precipitation flame atomization atomic absorption spectrometric method for the indirect determination of sulphate is proposed. By using a reversed flow-injection configuration for precipitation as barium sulphate, this anion was determined in the range 10–150 g/ml, with a relative standard deviation of 2.6%. The sensitivity was increased by a factor of seven by using a nitrous oxide-acetylene flame to measure barium.     

非晶态合金催化剂用于二甲基紫脲酸加氢反应

二甲基紫脲酸加氢反应;nicob/白炭黑催化剂;非晶态合金催化剂     

负载型纳米Ni催化剂用于对氯硝基苯选择加氢

以TiO2为载体,N iB为诱导剂,粉末化学镀法制备了负载型纳米N i催化剂.通过TEM、HRTEM、XRD和ICP技术对催化剂物性进行了表征.结果表明,碱性镀液可使载体表面均匀负载微晶结构纳米N i团簇,尺度为35nm左右.该负载型纳米N i在对氯硝基苯选择加氢反应中表现出很高催化加氢活性,并能有效抑制脱氯,达到了工业骨架镍水平.由酸性镀液得到的负载型非晶态纳米N i-P合金具有较弱的催化对氯硝基苯加氢活性.反应温度对反应时间和脱氯率有明显影响.     

Review of Directly Producing Light olefins via CO Hydrogenation

Directly making light olefins via CO hydrogenation is a promising process to obtain a nonpetroleum based supply of alkenes.Limited by the ASF distribution function of Fischer-Tropsch synthesis,the yield of light olefins (C2-C4) can not reach the desired levels,which is a great challenge to overcome.Beginning thermodynamic analysis,the ASF distribution function,the reaction performance of CO hydrogenation and slurry reactor studies.The problems currently faced by this research area are presented at the end of the article.     

不对称氢化反应

本文总结了各种手性膦配体以及它们的铑络合物在不对称氢化中的应用,并讨论了不对称氢化的机理和影响不对称诱导的各种因素。     

超细Ni-Cu-Co-La的制备及其催化乙腈加氢性能

以水合肼和硼氢化钾为共还原剂制备了四元合金催化剂Ni-Cu-Co-La,并将其应用于乙腈催化加氢反应.采用X射线衍射、X射线光电子能谱、透射电镜和H2程序升温脱附对催化剂进行了表征,考察了催化剂组分对乙腈选择性加氢制乙胺催化性能的影响.结果表明,Cu,Co和La的加入均不同程度地提高了催化剂的活性和选择性,在反应压力1.8 MPa,反应温度120℃,反应时间1 h的条件下,乙腈转化率和乙胺选择性分别为100%和98.24%,优于使用Raney Ni、非晶态Ni-B和Co-B合金催化剂时的结果.     

Sm2Fe17合金的氢化-歧化过程演化

通过X射线衍射(XRD)、扫描电镜(SEM)和能谱分析(EDX)等手段重点研究了Sm2Fe17合金在氢化-歧化过程中的相组成、相的变化以及微观结构的演化规律。研究表明：在0．1MPa的H2气氛下，Sm2Fe17合金首先吸氢；400℃时合金出现部分脱氢现象；在T≥500℃逐渐开始歧化为SmHx和α—Fe，同时生成了大量的微晶或非晶组织；随着温度的升高，合金中的微晶非晶逐渐晶化，750℃时晶化完全，晶粒长大至20～100nm。通过对Sm2Fe17合金的氢化一歧化过程研究，建立了该过程的微观结构变化规律的物理模型。     

超声波辅助Ru-B非晶态合金常压催化肉桂醛加氢制备肉桂醇

采用KBH₄化学还原法制备了超细Ru-B非晶态合金催化剂。Ru-B催化剂在肉桂醇液相常压加氢中显示出较高的肉桂醇选择性。在加氢过程中使用超声辐射能大大提高反应速率而肉桂醇的选择性几乎保持不变。加氢速率随着超声频率或超声时间的增加而增加。通过XRD、XPS、TEM、BET和ICP等各种表征手段，简要研究了超声辐射对Ru-B催化剂结构和电子特征的影响。同时，还讨论了超声对肉桂醛选择性加氢制肉桂醇催化性能的促进作用。     

MODIFICATION OF TRANSITION METAL CATIONS TO POLYMER-STABILIZED PLATINUM COLLOIDAL CLUSTERS IN ENANTIOSELECTIVE HYDROGENATION OF METHYL PYRUVATE

Modification of transition metal cations to polymer-stabilized Pt colloidal clusters modified with cinchonidine was studied in enantioselective hydrogenation of methyl pyruvate. Compared to the enantiomeric excess (e.e.) value (71.4%) obtained without the presence of metal cations, obvious e.e. enhancement (up to 82.5%) was resulted from the addition of Zn^2 but with a certain decrease in activity. The reaction parameters in the presence of Zn^2 were also studied. It was found that the Pt colloidal catalysts in the presence of metal cations performed very differently from that in the absence of metal cations.     

铜基催化剂的结构、物性及其对混合碳四选择加氢反应的催化性能

 用XRD，XPS，SEM和H2－TPR等手段研究了铜基负载型催化剂的结\r\n构和物性及其对混合碳四加氢脱炔的催化性能．结果表明，在负载铜催\r\n化剂中加入一定量的Co可提高催化剂的加氢脱炔活性，而Co含量较少时\r\n加入少量的Ce也能提高催化剂的活性和选择性．Cu和Co之间存在着相互\r\n协同作用，使得活性组分在催化剂表面偏析，CuO在催化剂表面呈非晶\r\n相分散状态，催化剂颗粒粒径变小，催化剂更容易被还原，从而改善了\r\n催化剂的催化性能．