The effect of calcining conditions on the rehydration of dead burnt magnesium oxide using magnesium acetate as a hydrating agent

Summary Magnesium oxide was produced through calcination of magnesite ore. A rehydration percentage of MgO to Mg(OH)₂ of higher than 60% is obtained using calcination temperatures of 1000°C and below. At these temperatures medium reactive MgO was formed. The extend to which dead burnt MgO (obtained after calcination at 1200°C and higher) may be rehydrated is dependent on the calcination time, but even after 1 h and using magnesium acetate as a hydrating agent only 40% of the initial product has rehydrated to Mg(OH)₂. After 4 and more hours of calcinations at 1200°C, a maximum of approximately 14% of the initial MgO is rehydrated back to Mg(OH)₂. Thermogravimetric analysis was performed on the various compounds to determine the amounts of Mg(OH)₂ that formed.     

Carbocyclic and nitrogen-containing fused CH-acids with an annelated indenyl fragment. Thermogravimetric and X-ray structural analysis of 6H-indeno[1,2-b]quinoline

Based on thermogravimetric characteristics first obtained for the model 6H-indeno [1,2-b]quinoline, the scheme of thermal conversions of this compound in the temperature range 20–700 °C has been proposed, and the limit of its thermal stability (300 °C) has been determined. This temperature is recommended as the optimum for synthesizing fused benzoaza(diaza)fluorenes. Based on the results of X-ray structural analysis, the molecules of the studied indenoquinoline form centrosymmetric pairs, which are arranged in (110) layers. The molecules are orientationally disordered. The observed self-association of these molecules is similar to the - association of fused heterocyclic systems with-excessive and ****- deficient fragments. It has been suggested that interferon-inducing and antitumor compounds with an annelated indenyl fragment have a common mechanism of action according to the intercalation model of stacking structures.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 703–709, April, 1995.     

酰胺型萃取剂N-503的合成

酰胺型萃取剂N-503[N,N-二-(1-甲基庚基)乙酰胺]可以用甲庚醇或2-氯代辛烷为原料来合成。它的重要中间体二-(1-甲基庚基)胺的制备方法有二:一是从甲庚醇制备的方法,将甲庚醇用阮来镍催化,常压氨解,得率95～99％左右;二是从2-氯代辛烷制备,此法需要高压设备,得率35％左右。第一个方法在扩大试验中,产率和产品质量都比较好,是一个较好的制备长碳链仲胺的方法。     

药用缓释辅料——羟丙基甲基纤维素的合成及其缓释性能的研究

本文研究了药物缓释材料HPMC的合成方法,探讨了碱纤维素制备,醚化剂浓度,混合醚化剂配经以及产品后处理对高粘度HPMC的影响。本文还初步对KCl,氨茶碱,硝酸异山梨醇酯等药物采用合成的HPMC作辅料,进行了缓释制剂的研究,结果表明合成的HPMC具有满意的缓释性能。     

胺型键合反相固定相的制备及评价

首次将一种新型硅烷偶联剂--β-（3，4-环氧环已基）乙基三甲氧基硅烷（β-ECTS）与辛胺反应，然后再键合到硅胶上，得到了胺型键合固定相，并用元素分析、^13C固体核磁共振、红外光谱进行了表征。以甲醇和水为二元流动相，用包括碱性、酸性和中性有机化合物在内的混合物对该固定相进行评价，并考察了该填料的适用pH范围及水解稳定性。结果表明，该固定相具有较好的色谱性能，且在pH=2-8之间稳定性能良好，可有效地用于碱性化合物的分析分离。     

高分子化学课程中若干论题的进展

高分子化学课程中下列五个论题被加以修正和补充:(1)1,2-二取代乙烯单体的聚合;(2)乙烯基单体聚合时的键连方式;(3)自由基聚合的自动加速;(4)引发转移和引发转移终止剂;(5)氢转移聚合和基因转移聚合。     

沉淀二氧化硅消光剂的制备研究

涂料中的消光剂是一类能够改变涂膜表面光学性能的助剂。这类助剂能够在涂膜表面产生预期微粗糙度,使涂膜的光泽显著降低,给人一种古朴典雅的感觉。近几年来,我国的涂料工业方兴未艾,涂料总产量也跃居世界的前列。在这期间高光泽的亮光涂料以其色泽鲜艳、明亮等优点深受消费者的喜爱,并在相当长的时间内一统着涂料市场[1]。但是,随着人们生活水平的不断提高,一方面消费者感觉到了高光泽的亮光涂料成膜后反光比较严重,对人的眼睛有害;另一方面消费者的审美观念越来越倾向于休闲、时尚和个性化。这些因素就导致了人们对具有柔和外观的低光泽涂…     

芳香PET树脂母粒的研制

通过丙烯酸和丙烯酸正丁酯溶液共聚合，得到丙烯酸－丙烯酸正丁酯共聚物，该树脂与环氧氯丙烷反应后再与PET树脂切片继续反应，可使PET树脂切片表面形成聚丙烯酸酯自膨润型吸油网络结构，将表面具有聚丙烯酸酯自身膨润型吸油网络结构的PET树脂切片（简称为留香剂）在油溶性香精中浸泡，香精就被吸附在留香剂表面，即得到芳香PET树脂母粒。用SEM观察了母粒的表面结构形态。     

Zum chemischen Transport von Molybdän mit SbBr3 – Experimente und Modellrechnungen

On the Chemical Transport of Molybdenum using SbBr₃ – Experiments and Thermochemical Calculations Mo migrates in a temperature gradient from the region of higher temperature to the lower temperature using SbBr₃ as transport agent. For various mean transport temperatures (750 ? T ? 1000°C; T = 0,5 (T₁ + T₂); T₂ ? T₁ = 100°C) we observed small transport rates (? ? 0,6 mg/h) which rise up to 16 mg/h for higher transport agent concentrations. Small amounts of MoO₂ and Sb were detected beside Mo in the sink. The observed solid phases in the sink are in agreement with thermodynamical calculations by CVTrans which also demonstrate that the formation of MoO₂ and Sb as well as the transport effect of SbBr₃ are caused by traces of H₂O from the quartz glass wall. The sequence of deposition of Mo, MoO₂ and Sb in the examined temperature range can be calculated (CVTrans) and measured with the transport balance.     

A NOVEL ZWITTERIONIC SILANE COUPLING AGENT FOR NONTHROMBOGENIC BIOMATERIALS

A novel silane coupling agent bearing sulfobetaine group, N,N-diethyl-N-（3-sulfopropyl）-aminopropyl- trimethoxysilane （DESATS）, was first designed, synthesized and characterized. Its solution property was studied by means of dynamic light scattering. DESATS was successfully bonded onto the surface of the glass and proved by ESCA. Platelet adhesion assay in vitro indicated that the nonthrombogenicity of glass slide modified with DESATS is greatly improved.