Selective Oxidation of Betulin by Cr(VI) Reagents

Oxidation of betulin by pyridinium dichromate, pyridinium chlorochromate, and K₂Cr₂O₇ -H₂SO₄ in the presence of tetrabutylammonium bromide was studied. Products of regioselective C-3, C-28-, and exhaustive oxidation, 28-hydroxylup-20(29)-3-one, 3-hydroxy- and 3-oxolup-20(29)-en-28-al were obtained.     

稀土-沸石-TiO2三元体系光催化材料的性能研究

以钛酸丁酯、稀土硝酸盐、斜发沸石为主要原料,用溶胶-凝胶法制备了稀土-沸石-TiO2三元体系的光催化剂.使用IR,TG-DSC,XRD,SEM等手段对样品进行了表征; 以甲基橙为目标物,太阳光为光源,用光解率对光催化剂性能进行了评价.实验表明,随着沸石负载TiO2量的增加,光催化剂的3 h光解率也逐渐提高; 反应体系的温度越高,光解率越大; 当溶液pH约等于5时,光解率达到最大.     

含9-丁基咔唑基二炔/聚炔汞及二炔金配合物的合成与性质

合成了9-丁基咔唑基聚炔汞聚合物[—HgC≡CRC≡C—]n及其二聚体[MeHgC≡CRC≡CHgMe]和金的二聚体[(PPh3)AuC≡CRC≡CAu(PPh3)](R=9-丁基咔唑基). 用 1H NMR, 13C NMR, 31P NMR, FTIR, FAB-MS, UV-Vis, Fluorescence及Phosphorescence 光谱对其进行了表征. 结果表明, 体系中金和汞产生的重原子效应可以促进单线激发态S1与三线激发态T1的系间跃迁, 使标题化合物产生有机三线态发光.     

Structures and electrochemical characteristics of several kinds of alloys

The structures and the electrochemical characteristics of La_0.7−x Ce_xMg_0.3Ni_2.8Co_0.5 (x = 0.1–0.5) alloy, Ti_0.25−x Zr_xV_0.35Cr_0.1Ni_0.3 (x = 0.05–0.15) alloy and AB_3<x<5-type alloy, which are the representative examples of AB₃-type alloy, solid solution alloy and non-AB₅-type alloy, respectively, have been investigated, and the performances of MH-Ni battery in which AB_3<x<5 type alloy is used as the negative electrode material are examined at relatively low temperature.     

加速剂对化学镀镍层组成与结构的影响

加速剂对化学镀镍层组成与结构的影响方景礼，武勇，韩克平，张敏（南京大学应用化学研究所配位化学国家重点实验室南京２１００９３）关键词化学镀镍，Ｎｉ０Ｐ合金，加速剂，硫脲化学镀镍磷合金具有耐蚀性、可焊性、厚度均匀和硬度高等优点，已得到广泛应用。为提高生产...     

人工神经网络X射线荧光光谱法测定钢中酸溶铝

建立了一种人工神经网络-X射线荧光光谱法测定钢中酸溶铝的方法，用X射线荧光光谱法测定低合金钢中总铝值，应用所建立的ANN-BP网络模型，输入总铝含量直接预测出酸溶铝含量。同时使用改进的BP算法，避免了神经网络学习中可能产生的麻痹现象。该方法用于钢中酸溶铝的测定，结果满意。     

Derivatization of carboxylic acids with 9-bromomethylacridine using micellar phase-transfer catalysis

Summary Micellar phase-transfer catalysis (MPTC) offers the opportunity to derivatize carboxylic acids directly in an aqueous matrix without prior extraction of the acids into a suitable aprotic solvent. The currently developed MPTC system consists of a non-ionic surfactant, Arkopal N-130, an ion-pair agent, tetrakis-(decyl)-ammonium bromide, and a novel fluorescence reagent, 9-bromomethylacridine. The MPTC system can be applied to the derivatization of many types of carboxylic acids. The reaction rate is affected by the lipophilicity of the acid and by the presence of other functional groups. For lipophilic carboxylic acids the reaction is complete within 5 min at 60°C and pH 7.0.     

[2,4—CH3）2C5H5]2TiCO的合成及结构

合成了开环夹心羰基化合物[2,4-(CH_3)_2C_5H_5]_2GCO,得到了该分子的单晶结构,[2,4-(CH_3)_2C_5H_5]_2TiCO晶体属于正交晶系,P2_12_12_1空间群,晶胞参数a=1.0078(5)nm,b=1.1909(8)nm,c=1.1946(5)nm,b=1.4337(13)nm~3,Z=4,R=0.054。单晶结构表明该分子为平行覆盖型开环夹心化合物,用EHMO方法计算了[2,4-(CH_3)_2C_5H_6]_2TICO的电子结构。     

Morphology Control over the Organic Nanoparticles of 1,3-Diphenyl-5-（9-anthryl）-2-pyrazoline

The organic nanoparticles of a blue-light-emitting molecule, 1,3-diphenyl-5-(9-anthryl)-2-pyrazuline, were prepared by reprecipitation method using acetonitrile as the solvent for the molecular precursor. Three morphologies, spherical, doughnut-shaped and cubic, could be observed on the silicon substrate forthe nanoparfides by the volume-controlled addition of acetonitrile. The evolution of particle morphology as a function of acetonitrile addition was attributed to the variation of the growth habits of the particles in the different environment. The nanoparticles exhibit the novel photoluminescence spectra as compared to those of monomer and the bulk crystals.     

Determination of Labile Iron at Low nmol L−1 Levels in Estuarine and Coastal Waters by Anodic Stripping Voltammetry

A new method is presented for the determination of electrochemically labile iron in estuarine and coastal seawater. The method is based on differential pulse anodic stripping voltammetry (DPASV) at a rotating silver‐alloy disk electrode. The voltammetric parameters include a plating potential of ?1.5 V and an activation potential of ?5 V for 10s; the seawater is at the original sample pH. The main finding is the presence of a peak for low nmol L^?1 levels of iron at ?0.55 V ascribed to elemental iron deposited on the bare silver alloy electrode. The peak increased linearly with the iron concentration between <1 and 14 nmol L^?1 using a 900 s plating time. At higher concentrations an additional iron peak appeared at ?0.7 V which was also found to increase linearly with the iron concentration but at a higher concentration range from ca. 15 to 90 nmol L^?1 using a 300 s plating time. The second peak was ascribed to iron deposited on iron. Additions of chelating agents (EDTA and a siderophore) to seawater caused the iron peak to be masked indicating that this method is suitable for iron speciation as only the electrochemically labile fraction is determined. The detection limit was 0.3 nmol L^?1 using a 900 s plating time. The method was used to determine iron in the range of 5 to 50 nmol L^?1 in samples from the Mersey estuary near Liverpool and its potential use for in situ monitoring was demonstrated by using it to monitor labile iron (at 2–3 nmol L^?1) over a period of 4 days at 1 h intervals in coastal waters in the Trondheim fjord, Norway.