无溶剂法大量制备高效红光碳点及其在白光器件中的应用

以邻苯二胺、 2,5-二氨基苯磺酸和三氯化铝为原料, 通过无溶剂法大量制备了高效的红色荧光碳点 (R-CDs). 制得的碳点尺寸大约为2.4 nm, 含有13%的氮元素, 主要由高度石墨化的碳核及覆盖在其表面的大量官能团构成. 在不同的波长光激发下, 碳点在乙醇溶液中表现出不依赖于激发的红光发射, 其荧光峰位于 704 nm, 最大量子产率达到22%. 由于R-CDs具有优异的光学性质, 利用其构筑了紫外光激发的碳基白色发光二极管, 其色坐标为(0.33, 0.33), 非常接近自然光. 该研究为高效红色荧光碳点的大量制备提供了一种新路径, 同时拓宽了其在白光器件中的应用.     

Solvent induced enhancement of nonlinear optical response of graphdiyne

Flat and crystalline materials with exceptional nonlinear optical(NLO) properties are highly desirable for their potential applications in integrated NLO photonic devices.Graphdiyne(GD),a new twodimensional(2 D) carbon allotrope,has recently evoked burgeoning research attention by virtue of its tunable bandgap along with a high carrier mobility and extended π-conjugation compared with most conventional optical materials.Here,we experimentally probe the third-order nonlinear optical response of GD dispersed in several common solvents(alcohols) using a femtosecond Z-scan technique.The measured nonlinear optical refractive index is in the order of ~10^-8 cm²/W,which is approximately one order of magnitude higher than that of most 2 D materials.In particular,we find that different NLO responses can be observed from GD when dispersed in different solvents,with the strongest NLO response when dispersed in 1-propanol.It is proposed that some intrinsic properties of the solvents,such as the polarity and viscosity,could influence the NLO response of GD materials.Our experimental results confirm the assumptions on the NLO behavior in GD and demonstrate its great potential for future generations of Kerr-effect-based NLO materials and devices.     

Phase‐controlled crystallization of amorphous calcium carbonate in ethanol‐water binary solvents

The evolution of amorphous calcium carbonate (ACC) into crystals in ethanol/water binary solvents under ambient temperature was investigated, and it was found to depend on the volume ratio of ethanol to water (R). Calcite remained dominant when the amount of water was high (R = 1/3). A slight change in the amount of ethanol (R = 3/1) could lead to a dramatic change in the polymorph from calcite to aragonite. However, when poly (allylamine hydrochloride) (PAH) was added at R = 3/1, almost pure vaterite could be obtained, which has a specific morphological variation (from hollow microspheres to cloud‐like). This study provides an alternative polymorphic route for the CaCO₃ mineral by using the evolution of ACC in different solvent environments, which provides some useful clues for understanding the importance of kinetic control of the morphologies and polymorphs of a wide range of inorganic materials. In addition, this simple mild phase‐controlled synthetic method could be scaled up as a green chemistry route for the industrial production of different polymorphs of CaCO₃.     

The promoting role of minor amount of water in solvent-free hydrogenation of halogenated nitrobenzenes

This study shows that minor amount of water plays a very important role in solvent-free hydrogenation of halogenated nitrobenzenes. For dried sponge Pd, the reaction cannot occur in the absence of water. For Pd/C catalyst, minor amount of water reduces the induction time, increases the reaction rate and reaction TOFs. Water might enhance the diffusion, adsorption and dissociation of H2 on Pd catalysts.     

Optimization of Adsorbent Layer Type and Developing Solvent in Coccidiostats Sample Preparation with Procedure of Solvent Front Position Extraction

Coccidiostats are drugs used against coccidiosis, a common disease among breeding animals. Their widespread application leads to the appearance of their residues in food, which is potentially harmful for human health and life. The European Union has established limits of concentrations of these drugs in premixtures and food. Nowadays, there are many methods for monitoring coccidiostats’ presence in market products, but their frequent weakness is sample preparation. Solvent Front Position Extraction is a planar chromatography-based sample preparation method that allows for effective assay of samples with coccidiostats when coupled with LC-MS/MS. The purpose of this research was to find common conditions for the effective isolation of eight coccidiostats from biological sample components with both lower and higher retention than the substances of interest. The acquired results were used for effective isolation of monensin and salinomycin from the premixture samples and allowed for their quantitative determination. The application of a semi-automatic device for the development of chromatograms positively impacted the results, confirming the effectiveness of the method for determining coccidiostats in biological samples.     

Application of solvent evaporation technique for pure drug crystal spheres preparation

An innovative application of the solvent evaporation technique was suggested. Solvent evaporation technique is a technique for drug encapsulation and nanosphere preparation. The widely used technique is also facing the problem of low actual drug entrapment percent, which is not economic from the industrial view. The goal of this work is trying to use the advantage of this technique concerning the product sphericity and the ability to control particle size, to prepare a drug as pure crystals spheres. Ibuprofen is selected as a model drug. The spheres are formed by using Polyvinyl pyrrolidone (PVP) or Polyethylene glycol (PEG) as an anti-aggregating agent but not formed on using tween or span. Particle size and actual drug content depend on the concentrations the anti-aggregating agent used. Surfaces of the drug crystal spheres are porous with empty sphere internal structure on using PVP but spongy and rough on using PEG. The drug has its identity chemical form in the drug crystal spheres. IR scan of spheres prepared on using PEG showed a characteristic ether peak. DSC showed melting endothermic peak of PEG, but X-ray showed minor change in the drug crystal patterns. Drug release profiles from crystal spheres prepared with the same anti-aggregating agent are close to each other. The drug release profiles from drug crystal spheres prepared by using PEG are more controlled than that prepared by using PVP. The drug release mechanism is diffusion. It was concluded that, the same technique could be suggested for preparation of other biomedical material in pure crystals spheres with controlled particle size. These properties may encourage to prepare very small particles with spherical shape for inhalation or injection as an innovative particle technology application for the widely used technique.     

Montmorillonite as a Heterogeneous Catalyst in the Efficient,Mild and One Pot Synthesis of Schiff Bases under Solvent‐Free Conditions

A mild and efficient method has been reported for preparation of Schiff base ligands through condensation reaction of various aromatic aldehydes and ketones with different aromatic amines in the presence of montmorillonite as a heterogeneous catalyst under solvent free conditions. The advantages of this friendly, economically, environmentally and mild method are such as; simplicity of the reaction procedure, reusability of catalyst, simple work‐up, high product yields and very short reaction times.     

Liquid–liquid equilibrium and interfacial tension of the ternary system heptane + thiophene + 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide

The liquid–liquid equilibrium (LLE) of the ternary system comprising heptane, thiophene and the ionic liquid 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([C₂mim][NTf₂]) was determined at 25 °C and atmospheric pressure, for preliminary evaluation of the potential of this ionic liquid as solvent for the desulfurisation of transportation fuels. Classical parameters such as solute distribution ratio and selectivity were calculated from the LLE data and subsequently analysed. The LLE data were also correlated by means of the ‘Non-Random Two-Liquid’ (NRTL) equation. Besides the LLE, another critical property for the design of extraction processes, namely the interfacial tension, was determined in parallel, throughout the immiscibility domain of the ternary system. For the first time, the LLE and the interfacial tension of a ternary system involving an ionic liquid are jointly reported.     

An efficient synthesis of pyrazole chalcones under solvent free conditions at room temperature

An easy,safe,solvent free and effective method for the synthesis of pyrazole-substituted chalcones has been achieved by grinding pyrazole aldehydes and acetophenones in the presence of activated barium hydroxide(C-200) in high yield within short span of time.All reactions were carried out just by grinding the two reactants in the presence of activated barium hydroxide(C-200). Results are also compared with sodium hydroxide and potassium hydroxide.     

Influence of the solvent quality on the AhR mediated Procept assay measurement of dioxin and dioxin-like compounds

Polychlorodibenzo-p-dioxins, polychorodibenzofurans and “dioxin-like” polychlorinated biphenyls are widespread persistent organic pollutants sharing a similar toxicological pathway mediated by the aryl-hydrocarbon receptor (AhR). Since the confirmatory method for their measurement at trace levels in complex matrices (using isotopic dilution and gas chromatography-high resolution mass spectrometry) remains time and cost-consuming, growing efforts of the scientific community have been focused on the development of screening approaches, including AhR mediated assays. Unfortunately, AhR ligands are highly diverse and agonistic/antagonistic effects can be observed on procedural blanks and/or sample extracts. In this study, the influence of solvent grade quality on the response of a DNA-binding AhR mediated assay used for screening dioxins has been investigated. Our results demonstrated a very critical impact of this parameter with both strong agonistic and antagonistic effects observed for any tested solvent lot. A small silver nitrate silica column removed partly these interfering compounds and then can be recommended as final purification step. Some preferable grades can be identified and selected in order to guarantee the best possible performances. However, it appears necessary to test every new lot, even if a grade appeared previously compliant.