Facile and Mild Synthesis and Characterization of Some New Diazo Dyes on the Basis of Schiff Bases in the Presence of Nanocrystalline Magnesium Oxide as a Base Catalyst under Solvent‐free Conditions

In this research, some new diazo dyes including Schiff base have been synthesized by the condensation reaction between ethylenediamine and derivatives of salicylaldehyde containing diazo functional groups in the presence of nanocrystalline magnesium oxide as a solid base catalyst under solvent‐free conditions. Nanocrystalline magnesium oxide has been characterized by XRD, BJH and TEM techniques. The corresponding products have been obtained in excellent yields and high purity. All of the obtained diazo‐Schiff bases are highly colored and can be applicable as useful diazo dyes and characterized by spectroscopy data.     

Electrocatalytic determination of penicillamine using multiwall carbon nanotubes paste electrode and chlorpromazine as a mediator

In this study, we describe the application of carbon paste electrode modified with multiwall carbon nanotubes as a voltammetric sensor for determination of penicillamine (PA) in the presence of chlorpromazine as a mediator. This modified electrode showed very efficient electrocatalytic activity for the anodic oxidation of PA. The peak current of linear sweep voltammograms of PA increased linearly with it’s concentration in the range of 0.5–500 μM PA. The detection limit for PA was 0.2 μM. The RSDs for 1.0 and 10.0 μM PA were 1.1 and 1.7%, respectively. The proposed sensor was successfully applied for the determination of PA in human urine and tablet.     

The Effects of Food on Cannabidiol Bioaccessibility

Cannabidiol (CBD) is a hydrophobic non-psychoactive compound with therapeutic characteristics. Animal and human studies have shown its poor oral bioavailability in vivo, and the impact of consuming lipid-soluble CBD with and without food on gut bioaccessibility has not been explored. The purpose of this research was to study the bioaccessibility of CBD after a three-phase upper digestion experiment with and without food, and to test lipase activity with different substrate concentrations. Our results showed that lipase enzyme activity and fatty acid absorption increased in the presence of bile salts, which may also contribute to an increase in CBD bioaccessibility. The food matrix used was a mixture of olive oil and baby food. Overall, the fed-state digestion revealed significantly higher micellarization efficiency for CBD (14.15 ± 0.6% for 10 mg and 22.67 ± 2.1% for 100 mg CBD ingested) than the fasted state digestion of CBD (0.65 ± 0.7% for 10 mg and 0.14 ± 0.1% for 100 mg CBD ingested). The increase in bioaccessibility of CBD with food could be explained by the fact that micelle formation from hydrolyzed lipids aid in bioaccessibility of hydrophobic molecules. In conclusion, the bioaccessibility of CBD depends on the food matrix and the presence of lipase and bile salts.     

Spectral,crystallographic, theoretical and antibacterial studies of palladium(II)/platinum(II) complexes with unsymmetric diphosphine ylides

The reaction of α‐keto‐stabilized diphosphine ylides [Ph₂P(CH₂)_nPPh₂═C(H)C(O)C₆H₄‐p‐CN] (n = 1 (Y¹); n = 2 (Y²)) with dibromo(1,5‐cyclooctadiene) palladium(II)/platinum(II) complexes, [Pd/PtBr₂(cod)], in equimolar ratio gave the new cyclometalated Pd(II) and Pt(II) complexes [Br₂Pd(κ²‐Y¹)] ( 1 ), [Br₂Pt(κ²‐Y¹)] ( 2 ), [Br₂Pd(κ²‐Y²)] ( 3 ) and [Br₂Pt(κ²‐Y²)] ( 4 ). These compounds were screened in a search for novel antibacterial agents and characterized successfully using Fourier transfer infrared and NMR (¹H, ¹³C and ³¹P) spectroscopic methods. Also, the structures of complexes 1 and 2 were characterized using X‐ray crystallography. The results showed that the P,C‐chelated complexes 1 and 2 have structures consisting of five‐membered rings, while 3 and 4 have six‐membered rings, formed by coordination of the ligand through the phosphine group and the ylidic carbon atom to the metal centre. Also, a theoretical study of the structures of complexes 1 – 4 was conducted at the BP86/def2‐SVP level of theory. The nature of metal–ligand bonds in the complexes was investigated using energy decomposition analyses (EDA) and extended transition state combined with natural orbitals for chemical valence analyses. The results of EDA confirmed that the main portions of ΔE_int, about 57–58%, in the complexes are allocated to ΔE_elstat.     

Using a Natural Surfactant for Synthesize of NiO and CuO Nanostructures via Simple and Fast Microwave Approach

NiO and CuO nanostructures were synthesized successfully via simple and fast microwave approach. Olive oil was chose as surfactant for stabilizing nanostructures. Different parameters such as microwave time and power and olive oil concentration were investigated on product size and morphology. The products were characterized with X-ray diffraction pattern, scanning electron microscopy, transmission electron microscopy and energy dispersive spectrometry analysis.     

Modification of an implicit approach based on nonstandard rules for structural dynamics analysis

The present study aims to modify a recently suggested implicit approach consisted of the approximate Euler method and closed-form exponential mapping (herein referred to as the Liu scheme) for the dynamic analysis of structures. Such modification has been developed based upon nonstandard rules. The equation of motion is formulated in the augmented dynamic space to apply the exponential mapping as a group preserving scheme. The formulation of the proposed method involves the hyperbolic sine and cosine functions. The method is therefore prone to divergence due to the behavior of the hyperbolic functions in structures with a high ratio of stiffness to mass. In the present study, to consider the properties of the structural equation into the formulation of the time step size and thereby avoid the divergence, a parameter, known as stability parameter, is thus derived from the exact solution of the equation of motion based on nonstandard rules. Embedding this parameter into the proposed method improves its stability. Afterward, for evaluating the performance of the proposed method, it is applied to several structures with different loading patterns while implemented in programing environment of the Matlab software. The results are compared to those of several commonly used numerical methods in structural applications. It is found that the proposed method has acceptable convergence and accuracy, and low time consumption compared to several commonly used methods. Furthermore, its stability is guaranteed by embedding the stability parameter into the proposed method.     

An electrochemical sensor based on Pt nanoparticles decorated over-oxidized polypyrrole/reduced graphene oxide nanocomposite for simultaneous determination of two neurotransmitters dopamine and 5-Hydroxy tryptamine in the presence of ascorbic acid

Abstract

In this study, the Pt nanoparticles/over-oxidized polypyrrole nanofiber/reduced graphene oxide (Pt NPs/OPPy/RGO) nanocomposite was electrochemically synthesized and used to modify a glassy carbon electrode. To confirm the Surface morphology and characterization of the nanocomposite, field emission scanning microscopy (FE-SEM), X-ray diffraction (XRD), Raman, FT-IR, and X-ray photoelectron spectroscopy (XPS) were used. Simultaneous determination of these species showed one linear response 0.1–250.0?μM and two linear responses 0.5–10.0?μM and 10.0–470.0?μM, with detection limits 42?nM and 106?nM (S/N?=?3) for DA and 5-HT, respectively. Finally, the analytical application of this modified electrode was investigated in the human blood plasma.     

Synthesis,antibacterial evaluation and survey on the thermophysical characteristics of novel medically applicable polyamides containing pharmaceutically outstanding triazole moieties

There are many different strategies to decrease the incidence of infection of medical device and food related containers. One way to prevent infection is by modifying the polymers used in making the devices and containers. Incorporation of antimicrobial agents in the bulk material or in formulations of medical devices production has been considered a viable alternative for systemic application of antibiotics. In this article, preparation of a series of triazole containing polymers, poly(triazole-amide-imide)s (PTAI)s and poly(triazole-amide) (PTA)s, and their monomers are reported. These polymers were readily soluble in a variety of organic solvents, showed significant thermal properties and also viscosities in the range of 0.55–0.66 dL/g. They have been tested against a range of Gram-positive and Gram-negative pathogens. The results indicated that these novel polymers containing triazole moiety in their repeating units can effectively control Gram-positive and negative pathogens and their physic-chemical properties besides their antibacterial characteristics make them unique candidate for using in the manufacturing of the medical devices.