A Simple Method to Prepare On‐Capillary Frits for Micro‐Column Separation

Sintering stainless steel powders was initially used to prepare the inlet frit in fused silica capillaries. The use of such inlet frits and outlet frits sintered by the stationary phase itself in the capillary to retain C₁₈ particles was demonstrated to withstand the long exposure, up to a high pressure of 60 MPa, for packing and the prepare column was stable and robust enough to do the continuous chromatographic operations. Characterization of the inlet and outlet frits by scanning electron micrography showed the fused metal particles formed a porous network in the capillary inlet and the homogenous separation beddings were obtained by slurry packing.     

纳米TiO2材料分离富集、悬浮体进样氟化辅助ETV-ICP-AES直接分析痕量稀土元素

以纳米TiO₂为吸附材料分离富集了稀土离子Y,Yb,Eu,La,Dy,Tm,Sm,Ho,Nd和Pr,研究了其吸附性能,并将吸附于纳米TiO₂上的稀土离子直接制成悬浮体,用氟化辅助电热蒸发等离子体原子发射光谱(FETV-ICP-AES)进行检测,考察了上述稀土离子的蒸发行为.结果表明,基体元素可与待测物在灰化阶段完全分离,在优化的实验条件下,检出限和RSD结果均与文献值基本一致.     

悬浮体进样/氟化电热蒸发(ETV)/ICP-AES直接测定二氧化钛粉末中痕量钇

以聚四氟乙烯(PTFE)悬浮体为氟化剂,悬浮体制样/氟化辅助电热蒸发(ETV)/ICP-AES直接测定TiO₂陶瓷粉末中痕量杂质钇;考察了影响基体和待测元素的蒸发过程的各种因素;对比研究了待测元素和基体的氟化蒸发行为;实现了基体和待测元素的预分离,显着降低了基体效应。本法的检出限为0.26μg/L,相对偏差为3.8%(n=5,c=0.5mg/L).     

Slurry Sampling Electrothermal Vaporization Combined with ICP-AES for Direct Analysis of Environmental Samples

In this article, a polytetrafluoroethylene (PTFE) slurry was used as a chemical modifier for direct determination of trace elements in environmental samples by electrothermal vaporization inductively coupled plasma atomic emission spectrometry (ETV-ICP-AES) with slurry sampling. The vaporization behaviors of the analytes in slurry and solution were comparatively studied in the presence of PTFE. The main influence factors for this method were examined. Under the optimum operating conditions, the precision of this method was better than 7% with the detection limits varying from 1.7 ng mL^?1 (Cu) to 203 ng mL^?1 (Zn). The proposed method has been applied to the direct determination of the trace elements in camphor tree leaves and standard reference material (the combined sample of branch and leaf of shrub, GBW 07603) with satisfactory results.     

Research on Si-Al based catalysts prepared by complete liquid-phase method for DME synthesis in a slurry reactor

A series of Si-Al based DME synthesis catalysts were prepared by complete liquid-phase method and characterized by in situ XPS, XRD, N₂ adsorption and NH₃-TPD analyses. Based on the results, the addition of Si could adjust the pore structure and surface acidity of catalyst, exhibiting a strong promoting effect on the CO conversion and DME selectivity. However, when Si/Al ratio is higher, Si would cover active sites and increase the amount of strong acidity sites, causing the reduction in catalytic activity. It was found from in situ XPS characterization that Cu⁰ is the active center of methanol synthesis in DME production, and the addition of Si changes the chemical surroundings of active components and weaken the interaction between Cu, Zn and Al, which maybe give rise to the decrease in catalyst stability.     

A Semi-solid Zinc Powder-based Slurry Anode for Advanced Aqueous Zinc-ion Batteries

The booming of aqueous zinc-ion batteries (AZIBs) draws the researchers’ attention to issues of zinc metal anodes, such as uncontrollable dendrite growth, corrosion, and volume effects. Zinc powder anode is more suitable for the industrial application of AZIBs than the widely used zinc foil anode due to its low cost, tunability and processability. However, the related solutions are rarely studied because the above issues of zinc metal anode are more serious in zinc powder anode. Herein, for the first time, we design a semi-solid zinc slurry anode consisting of zinc powder and zincophilic tin additive dispersed in a conductive elastic rheological network. Zinc can be deposited homogeneously on the dispersed tin particles, which avoids agglomerative zinc deposition and alleviates volume change during repeated zinc stripping/plating. Moreover, the practical application of the full cell with slurry is very promising since its operating life can be easily extended by facile slurry renewal.     

Facile Adjusting for Cells of Lightweight Isocyanate-based Polyimide Foam and Operable Combination between Different Distinctive Acoustic Foams for Higher Performance

New ambient sound absorption material, lightweight isocyanate-based polyimide foam(IBPIF), was fabricated by operable combination between different distinctive acoustic IBPIF. Cellular structure of IBPIF was facilely and obviously adjusted by increased slurry temperature corresponding to change in distinctive acoustic properties. Moreover, density of all IBPIF kept at only 12-17 kg/m~3. With increasing slurry temperature from 0 ℃ to 40 ℃, cell size and window opening rate gradually increased from 553 μm to 791 μm and from 6.85% to 58.46%,respectively. In this study, IBPIF generated by slurries at 0 ℃(marked as PIF-2) and 40 ℃(marked as PIF-6) showed best and distinctive acoustic behavior in 315-800 Hz and 800-6300 Hz regions, respectively. After acoustic behavior study of combined IBPIF prepared by stitching combination between two distinctive acoustic IBPIFs, results showed that only when PIF-6 sheet used as sound receiving surface even though with thickness of only 10 mm could the combined IBPIF possess the best acoustic level in 800-6300 Hz region as PIF-6. Furtherly, acoustic behavior in 315-800 Hz region could be significantly enhanced by increasing thickness of PIF-2 and could reach or close to the best acoustic level.     

悬浮液进样-液体阴极辉光放电原子发射光谱法测定高纯氮化硅粉体中微量杂质元素

针对高纯氮化硅粉体中的9种微量杂质元素(Al、Ca、Co、Fe、K、Mg、Mn、Na、Ni),建立了悬浮液进样-液体阴极辉光放电原子发射光谱定量分析方法.考察了制备稳定悬浮液对样品颗粒度的要求,并通过六通阀将悬浮液引入液体阴极辉光放电原子发射光谱装置检测.本方法采用水溶液标准进行定量分析,无需对悬浮液的pH值进行精确调节,能够保持液体阴极辉光等离子体的稳定性.研究了仪器装置的操作电压、载液流速、光电倍增管积分时间等因素对检出限的影响.优化后得到的最佳实验条件为操作电压1080 V,载液流速1.2 mL/min,光电倍增管积分时间800 ms.利用六通阀进样系统对原有的液体阴极辉光放电原子发射光谱装置进行改进,从而实现悬浮液直接进样检测.用此装置对氮化硅实际样品进行检测,得到各种元素的检出限在0.2~53 mg/kg之间,RSD在1.1%~5.0%之间.通过对氮化硅标准参考物质ERM-ED101进行分析,其测定结果与高温高压消解-电感耦合等离子体发射光谱法一致,并与标准参考值吻合,表明此方法可用于氮化硅粉体的悬浮液直接进样检测,结果准确可靠,灵敏度高,具备应用价值.     

悬浮液进样自吸扣背景石墨炉原子吸收光谱法测定高纯氧化铝中铜、铁和钠含量

采用悬浮液-自吸扣背景石墨炉原子吸收法测定了高纯氧化铝中痕量元素铜、铁、钠含量.实验对灰化温度、原子化温度和自吸扣背景灯电流等石墨炉原子吸收工作条件等进行了优化,确定了最佳测定条件.样品测试采用标准水溶液进行校正,方法准确性采用氧化铝AKP-30在高温高压和浓硫酸密闭条件下溶解样品进样分析测定结果与文献报道的其他测定方...     

悬浮液进样电感藕合等离子体发射光谱中颗粒的输运和蒸发行为

以碳化硼为例,研究了悬浮液雾化进样中的粒子在传输和蒸发过程中的行为,并对分析结果出现负偏离的原因进行了详细探讨.对比悬浮液颗粒的原始粒径分布和经过传输过程后的粒径分布,获得到达等离子体的颗粒粒径上限小于10 Am.样品中存在的部分超大粒径的颗粒(d>>10 μm)会严重影响可传输区域颗粒(d<10 μm)的质量运输效率...