Electrochemical behavior in simulated body fluid of TiO2 nanotubes on TiAlNb alloy elaborated in various anodizing electrolyte

The present study is focused on tailoring the morphology of TiO₂ nanotubes obtained on Ti6Al7Nb alloy and evaluating their electrochemical behavior in simulated body fluid. The presence of the α and β phases on the Ti6Al7Nb alloy leads to a two‐scale organization of the nanotubes on the samples – which in turn affects the electrochemical stability. Furthermore, five different types of TiO₂ nanotubes were obtained in various electrolytes (e.g. Generation I, a mixture of Generation II and Generation III, Generation III). Electrochemical behavior analysis of all obtained nanotubes morphologies was composed of Tafel plots, cyclic voltammetry and electrochemical impedance spectroscopy and was correlated with morphology data obtained from SEM (nanotubes diameters from top‐view and nanotube length from cross‐section view). The electrochemical results showed that morphological modifications of the Ti6Al7Nb alloy's surface by electrochemical anodizing have induced changes to the electrochemical behavior of the material, evident in the corrosion rates. Copyright © 2014 John Wiley & Sons, Ltd.     

一种基于二氢吩嗪的三维共价有机框架的合成、 结构与表征

二氢吩嗪衍生物由于其独特的氧化还原活性而备受关注. 本文先设计合成了一种含有二氢吩嗪基团的单体5,10-二(4-甲酰基苯基)-5,10-二氢吩嗪(M1), 再采用溶剂热法, 通过亚胺缩合反应制备了一种新型三维共价有机框架(3D COF, 3D-PN-2). 通过粉末X射线衍射(PXRD)、 氮气吸附-脱附、 傅里叶变换红外光谱(FTIR)和固体碳核磁共振波谱(¹³C CP/MAS NMR)等表征方法, 并结合理论模拟对其结构信息进行了研究, 得出3D-PN-2是具有十一重穿插金刚石(dia)拓扑结构的3D COF. 采用扫描电子显微镜(SEM)和透射电子显微镜(TEM)对其形貌进行了表征. 稳定性研究结果表明, 3D-PN-2具有较好的热稳定性和化学稳定性. 通过固体紫外-可见漫反射光谱研究了3D-PN-2的光吸收性能, 结果表明, 其在紫外和可见光区具有较宽的吸收范围(吸收边为 630 nm), 且具有较窄的能带间隙(2.11 eV). 通过循环伏安法研究了其氧化还原性能, 并计算得出其最高占有轨道能级(E_HOMO)为-4.50 eV, 最低空轨道能级(E_LUMO)为-2.39 eV.     

A hybrid nanofluid analysis near a parabolic stretched surface

Two dimensional incompressible steady viscous nano-fluid flow with the impacts of heat generation and porous medium is examined numerically. For this objective Ti₆Al₄v are taken as nano-particles dispersed in different base fluids such as methanol, engine oil and water. Basically in this study we will compare three different nano-fluids to assess their flow behaviour and thermal performance. The flow model is developed under certain assumptions. The two dimensional non-linear PDEs are converted into non-linear ODEs with suitable transformation. The numerical procedure is adopted to find the results by using Bvp4c technique in MATLAB. Moreover, graphs are generated for various parameters against the temperature and velocity profiles. The fluid behaviour for different parameter is examined on velocity and temperature profile. It is depicted that for high values of volume fraction and curvature parameter nano-particles leads to high velocity and temperature profile. Moreover, velocity profile decreases for permeability parameter, while temperature profile enhances for heat generation parameter. The influence of Nusselt number and skin friction also assessed. The model of entropy generation is also presented.     

Thermal radiation impact on magneto-hydrodynamic heat transfer micropolar fluid flow over a vertical moving porous plate: A finite difference approach

For this research, an examination on the magnetohydrodynamic flow of a micropolar fluid across a moving vertical porous plate for the presence of thermal radiation is achieved. It is necessary to translate the partial differential equations regulating the flow, heat, & mass transfer into dimensionless form employing proper non-dimensional variables, which are then cracked numerically by utilizing the Finite difference approach. Graphs are used to represent numerical values of various flow profiles; however, tables are used to represent the simulated values of rate coefficients. The velocity rises when the value of Grashof number, dimensionless viscosity ratio is raised, and the opposite effect is seen when the value of magnetic parameter, micro-gyration factor is raised. The result in skin friction coefficient improves when the values of magnetic parameter, micro-gyration factor, Prandtl number, and radiation are raised higher.     

机械球磨制备三苯胺基PAF-106s及C2烃吸附性质

以三苯胺为单体, 无水三氯化铁为催化剂, 二甲醇缩甲醛为外交联剂, 通过机械球磨不同比例的三苯胺、 三氯化铁和二甲醇缩甲醛, 合成了PAF-106s(PAF-106a~PAF-106c, PAF: porous aromatic framework). 红外光谱、 元素分析、 X射线光电子能谱和固体核磁共振波谱等表征结果证明发生了聚合反应. 氮气吸附结果表明, 三苯胺、 三氯化铁和二甲醇缩甲醛的比例影响PAF-106s的多孔性能. 三氯化铁和三苯胺摩尔比从3∶1增加到12∶1时, PAF-106c的BET比表面积从PAF-106a的135 m²/g增加到280 m²/g. 引入二甲醇缩甲醛后, PAF- 106d~PAF-106g的BET比表面积随三氯化铁和二甲醇缩甲醛摩尔比的增加而逐渐降低. 在273和298 K下, 测试了PAF-106c的C2烃吸附性能, 并采用理想吸附溶液理论计算了C₂H₂/C₂H₄和C₂H₆/C₂H₄分离比.     

Development of the Self-doping Porous Carbon and Its Application in Supercapacitor Electrode

The massive discharge of biomass wastes not only causes waste of resources, but also pollutes the environment. Therefore, converting biomass wastes into carbon materials is an effective way to solve the above problems. Here, using biomass waste pig nails as raw materials and K₂CO₃ as chemical activators, the N-doped porous carbon(KPNC) is prepared by direct pyrolysis. As an electrode for supercapacitors, the electrochemical tests of KPNCs showed that they exhibited good electrochemical performance and excellent cycling stability. When the current density is 0.2 A/g, the specific capacitance is up to 344.6 F/g. Moreover, it still maintains 97.6% initial capacitance retention after 2000 cycles at a high current density of 5 A/g. Above exceptional electrochemical performances may be ascribed to an appropriate porous structure(S_micro/S_total=80.31%, V_micro/V_total=76.19%), high nitrogen contents(4.44%, atomic fraction), oxygen contents(9.13%, atomic fraction) as well as small internal resistance. The above experimental results show that the conversion of pig nails to porous carbon can reduce the waste of resources and alleviate environmental pollution.     

Preparation of Quercus mongolica leaf-derived porous carbon with a large specific surface area for highly effective removal of dye and antibiotic from water

Quercus mongolica leaf (QL), an easily available biomass, was used as the precursor for preparing the hierarchical porous carbon with a large specific surface area and high adsorption capacities toward the representative dye and antibiotic. After being carbonized, QL was further chemically activated, and potassium hydroxide was proved to be a better activator than sodium hydroxide. The QL-derived porous carbon (PCQL) exhibited abundant micro- and mesopores, and the specific surface area reached 3275 m² g^?1. The performances of PCQL were evaluated through adsorbing rhodamine B (RhB) and tetracycline hydrochloride (TC) from water. Four adsorption isotherm models (the Langmuir, Freundlich, Sips, and Redlich-Peterson models), three adsorption kinetic models (the pseudo-first-order, pseudo-second-order, and intra-particle diffusion models), and the thermodynamic equations were used to investigate the adsorption processes. The pseudo-second-order kinetic model and the Sips isotherm model fitted the experimental data well, which indicates that the adsorption processes were controlled by the amount of adsorption active sites on the surface of PCQL, and these adsorption active sites had different affinities for the adsorbates. The maximum adsorption capacities of PCQL toward RhB and TC were 1946.0 and 1479.6 mg g^?1, respectively, based on the Sips model. The thermodynamic analysis indicates that the adsorption of PCQL toward adsorbents was spontaneous physical processes accompanied by the increasing disorder degree. The adsorption mechanism was attributed to the combination of the pore-filling, hydrogen bond, and π-π interactions. Moreover, in the fixed-bed experiments, the Yoon-Nelson model fitted the breakthrough curves well, and about 8 L wastewater containing RhB (200 mg L^?1) may be effectively treated by 1.0 g of PCQL. Above results indicate that QL is a promising precursor for preparing functional porous carbon materials.     

Porous multicomponent chitosan/poly(ε-caprolactone)-block poly (ethylene glycol)/SiO2 aerogel@polydopamine membrane for Congo red adsorption

A composite adsorbent, chitosan//poly (ε-caprolactone)-block poly (ethylene glycol)/SiO₂ aerogel@polydopamine (CS/PCL-b-PEG/SA@PDA) membrane was prepared for the adsorption of organic dyes. The matrix polymer materials of this novel adsorbent were eco-friendly. SiO₂ aerogel with nanoporous network construction was fixed in the multicomponent polymer fibers through simultaneous electrospinning-electrospray technology followed by modification of polydopamine (PDA). The composite adsorbent had a maximum adsorption capacity of 598.8 mg/g for Congo red (CR) and possessed good reusability performance. This adsorbent showed excellent performance for the selective adsorption of relatively large molecule CR dyes even under high concentration of small molecule methyl orange (MO) dyes or 1 M of salt solution. The adsorption mechanism indicated that the –NH₂ and –OH groups in adsorbent could generate the stronger electrostatic attraction with the –SO₃^- groups in CR. Meanwhile, the sufficient adsorption spaces of the adsorbent were constructed by the porous network structure of SiO₂ aerogel, the accumulation of PDA particles and the porous structure of the multicomponent composite membrane. The work provided a proactive study in designing an adsorbent for the selective adsorption of organic dyes.     

Control of pore environment in highly porous carbon materials for C2H6/C2H4 separation with exceptional ethane uptake

Adsorptive separation of C₂H₆ from C₂H₄ by adsorbents is an energy-efficient and promising method to boost the polymer grades C₂H₄ production. However, that C₂H₆ and C₂H₄ display very similar physical properties, making their separation extremely challenging. In this work, by regulating the pore environment in a family of chitosan-based carbon materials (C-CTS-1, C-CTS-2, C-CTS-4, and C-CTS-6)- we target ultrahigh C₂H₆ uptake and C₂H₆/C₂H₄ separation, which exceeds most benchmark carbon materials. Explicitly, the C₂H₆ uptake of C-CTS-2 (166 cm³/g at 100 kPa and 298 K) has the second-highest adsorption capacity among all the porous materials. In addition, C-CTS-2 gives C₂H₆/C₂H₄ selectivity of 1.75 toward a 1:15 mixture of C₂H₆/C₂H₄. Notably, the adsorption enthalpies for C₂H₆ in C-CTS-2 are low (21.3 kJ/mol), which will facilitate regeneration in mild conditions. Furthermore, C₂H₆/C₂H₄ separation performance was confirmed by binary breakthrough experiments. Under different ethane/ethylene ratios, C-CTS-X extracts a low ethane concentration from an ethane/ethylene mixture and produces high-purity C₂H₄ in one step. Spectroscopic measurement and diffraction analysis provide critical insight into the adsorption/separation mechanism. The nitrogen functional groups on the surface play a vital role in improving C₂H₆/C₂H₄ selectivity, and the adsorption capacities depend on the pore size and micropore volume. Moreover, these robust porous materials exhibit outstanding stability (up to 800 °C) and can be easily prepared on a large scale (kg) at a low cost (～$26 per kg), which is very significant for potential industrial applications.     

Preparation and fabrication of porous-Fe2O3/carbon black nanocomposite: a portable electrochemical sensor for psychotropic drug detection in environmental samples

Herein, we reported the fabrication of porous iron oxide/carbon black (P–Fe₂O₃/CB) composite through a two-step engineering method. At first, Prussian blue microcubes were used as a precursor and further calcined to form P–Fe₂O₃ microcubes. The intercalation of CB nanoparticles with P–Fe₂O₃ nanocubes was processed through the ultrasonication method. The obtained P–Fe₂O₃/CB were successfully scrutinized through various physiochemical characterization methods. The proposed P–Fe₂O₃/CB-modified glassy carbon electrode sensor was successfully implemented in the electrochemical sensing of chlorpromazine hydrochloride due to its very low charge transfer resistance (R_ct) compared to the other electrode modifiers. The sensitive detection of CPMH through differential pulse voltammetry exemplifies an excellent electroanalytical performance such as a wide linear range of 0.5–1472 μM, a lower detection limit (0.001 μM), and an appraisable sensitivity of 1.99 μA/μM cm^?2 due to its availability of a high number of active sites and its large surface area, respectively. It also expresses excellent selectivity, repeatability, reproducibility, and stability results. Moreover, the practical feasibility of the as-fabricated P–Fe₂O₃/CB/glassy carbon electrode sensor shows exquisite recovery (98.1–100.8%) results with an appraisable current response in various biological, pharmaceutical, and environmental samples.