Copper‐Bismuth Bimetallic Microspheres for Selective Electrocatalytic Reduction of CO2 to Formate

Electrocatalytic carbon dioxide reduction holds great promise for reducing the atmospheric CO₂ level and alleviating the energy crisis. High‐performance electrocatalysts are often required in order to lower the high overpotential and expedite the sluggish reaction kinetics of CO₂ electroreduction. Copper is a promising candidate metal. However, it usually suffers from the issues of poor stability and low product selectivity. In this work, bimetallic Cu‐Bi is obtained by reducing the microspherical copper bismuthate (CuBi₂O₄) for selectively catalyzing the CO₂ reduction to formate (HCOO^–). The bimetallic Cu‐Bi electrocatalyst exhibits high activity and selectivity with the Faradic efficiency over 90% in a wide potential window. A maximum Faradaic efficiency of ~95% is obtained at –0.93 V versus reversible hydrogen electrode. Furthermore, the catalyst shows high stability over 6 h with Faradaic efficiency of ~95%. This study provides an important clue in designing new functional materials for CO₂ electroreduction with high activity and selectivity.     

以橡子为碳源制备的空心磁性碳纳米球及其吸附性能

以橡子为碳源,通过高温煅烧法制备了粒径均匀的磁性空心碳纳米球(MHCNS)。经过HCl浸泡处理可得MHCNS-1,再经HNO_3和NH_3·H_2O处理得MHCNS-2。MHCNS-2粒径均匀,直径为20～40 nm,球壁厚度为3～5 nm。MHCNS-2的尺寸可通过改变镍离子与氢氧化钾的添加量和比例进行调控。通过X射线粉末衍射、扫描电镜、透射电镜、振动样品磁强计等方法对制备的产物进行了表征,进而分析了其生长机制。MHCNS-2对于有机染料亚甲基蓝(MB)的吸附性能的实验结果表明,MHCNS-2具有强吸附性能,当MB溶液浓度为100 mg·L~(-1)时,吸附量可以达到185 mg·g~(-1)。MHCNS对布洛芬的载药释药实验结果表明,MHCNS-2载药率可达44%,释药率达70%,有着良好的载药与释药能力。     

聚苯乙烯微球表面接枝丙烯腈的研究

采用分散聚合法制备出平均粒径为3.85 μm的窄分布聚苯乙烯微球， 并在此基础上引入第二单体丙烯腈进行共聚反应， 制备出平均粒径为4.02 μm的窄分布苯乙烯-丙烯腈共聚物微球. 对聚苯乙烯微球和苯乙烯-丙烯腈共聚物微球进行了形貌及粒径、红外光谱、差示扫描量热法(DSC)分析， 结果表明丙烯腈基团均匀分布在聚苯乙烯微球表面， 提高了聚苯乙烯微球表面的极性.     

Multicolor quantum dot-encoded microspheres for the detection of biomolecules

The biocompatible semiconductor quantum dots (QDs) have unique photophysical properties, which provide important advantages over organic dyes and lanthanide probes in fluorescence labeling applications. In this work, multicolor quantum QD-encoded microspheres have been prepared via the layer-by-layer (LbL) assembly approach. Polystyrene microspheres of 3 μm diameter were used as templates for the deposition of different sized CdTe QDs/polyelectrolyte multilayers via electrostatic interactions. Two kinds of biofuntional multicolor microspheres with two different antibodies, anti-human IgG and anti-rabbit IgG were prepared. Human IgG and rabbit IgG can be detected as target antigens in the multiplexed fluoroimmunoassays. Furthermore, a novel microfluidic on-chip device was developed to detect two kinds of antigen-conjugated multicolor QD-encoded microspheres; the microspheres can be distinguished from each other based on their fluorescence signals.     

Polymeric thiols as enzyme activators of serum creatine phosphokinase

Several hydrophilic polymeric thiols were prepared from aminoactivated polymeric supports by reaction with N-acetylhomocysteinethiolactone. Supports include agaroses, cellulose, Glycophase™ controlled-pore glass, and Matrex™ acrylic beads. Thiol content in these polymers was 3–72 μmol SH/g dry polymer. Several were effective solid-phase activators of the sulfhydryl-dependent enzyme creatine phosphokinase at concentrations comparable to that of monomeric thiol required for enzyme activation. The kinetic activation curves for the polymeric and the monomeric (thioglucose) activators were similar, suggesting unhindered interaction of the enzyme with the polymeric activator.     

细乳液聚合法制备磁性复合微球及其表征

在制备超细Fe3O4 磁性粒子的基础上 ,以 3种低分子量聚合物Disperbyk 1 0 6、Disperbyk 1 0 8和Disperbyk 1 1 1为Fe3O4 微粒在单体相中的分散稳定剂 ,采用细乳液聚合法制备了平均粒径为 3 40nm的PS Fe3O4 磁性复合微球 .详细研究了分散剂种类对细乳液聚合制备磁性复合微球的影响 ,并采用XRD、TGA和TEM等手段对磁性复合微球的形态、结构及磁响应性等进行了表征 .实验结果证明分散剂的选择对磁性复合微球的成功制备起着至关重要的作用 ,兼具酸性和碱性功能基的分散剂Disperbyk 1 0 6具有更好的分散和稳定效果 .TEM结果表明 ,所制备的复合微球具有一些缺陷 ,而缺陷处往往是Fe3O4 磁性粒子聚集的地方     

Analysis of carbohydrates using different quaternized polystyrene-divinylbenzene particles and pulsed amperometric detection

Summary This paper reports on the use of a polymer-based, strong anion-exchange stationary phase for rapid, selective and sensitive analysis of physiological important mono-, di- and oligosaccharides by high-performance anion-exchange chromatography (HPAEC) with pulsed amperometric detection (PAD) under alkaline conditions. The adsorbent was obtained by direct nitration of 3 and 5 μm, spherical non-porous highly cross-linked, styrene-divinylbenzene copolymer (PS-DVB) beads, followed by reduction of superficially introduced nitro groups with nascent hydrogen and quaternization of the resultant amino groups with iodomethane. Extended exposure to high pressure and strong alkaline conditions did not have any untoward effect on mechanical stability and chromatographic performance. A comparison of the 3 and 5 μm beads showed, that the synthesized 3 μm highly cross-linked PS-DVB particles are the preferred phases for the separation of monosaccharides and the 5 μm particles are preferable for the separation of oligosaccharides. To demonstrate the suitability for the analysis of complex samples, the optimized and validated system was used for the determination of glucose, fructose and sucrose in apple juice and other soft drinks such as Coca Cola. Finally, analysis within a few minutes without sample pretreatment down to a lower limit of detection of 0.174–0.504 μg mL⁻¹ at a linearity with R²>0.994 and a repooducibility higher than 98% further confirmed the efficiency of these polymeric sorbents.     

Synthesis of spherical microcapsules by photopolymerization in aerosols

 The preparation of polymer microcapsules of well defined size in the range of 10–50 μm with different shell thickness to core diameter ratios is described. An aerosol of monodisperse droplets of a homogeneous ternary liquid system which contained a hydrophobic component and a hydrophilic component dissolved in a high-volatile mutual solvent, was produced by dispersing with a vibrating-orifice aerosol generator. After the evaporation of the solvent in a nitrogen atmosphere the particles demix and form a two-phase droplet of core-shell type. These droplets were illuminated with UV light and polymerized to highly monodisperse microcapsules with a solid polymer shell and a liquid core. The properties of the resulting particles (size, size distribution, shell thickness, shape and surface characteristics) were investigated by scanning electron microscopy, Raman spectroscopy on single optically levitated particles, and confocal Raman micro spectroscopy. The microcapsules were highly monodisperse and have spherical shape. Received: 24 July 1996 Accepted: 29 August 1996     

Interfacial activity of a novel family of polymeric surfactants

A novel series of polymeric surfactants based on carboxy methyl cellulose and alkyl poly(etheroxy) acrylate were synthesized by ultrasonic irradiation. These polymeric surfactants have exhibit excellent surface activity due to their unique structure. The influences of salt, alcohol and alkali on the interfacial activity of these polymeric surfactants were studied by interfacial tensiometery, dynamic laser scattering (DLS), UV spectroscope and environmental scanning electrical microscope (ESEM). The surface tension and interfacial tension (IFT) properties change little with NaCl added. The formed micelles shrink, their size becomes smaller. Alcohols cause the IFT to decrease a little because a small amount of free chains present in solution. Under the influence of added alkali, the IFT of the polymeric surfactants, in aqueous solution, decreases so much that sometimes it is less than 10⁻² mN/m. Using data from the equivalent alkane scan, one cannot draw the conclusion that the action of alkali with the acidic components in crude oil leads to the ultra-low IFT. The analyses by UV, DLS and ESEM show that the micelles formed by polymeric surfactants could be disaggregated or destroyed sharply by the action of alkali. So the size of micelles decreases greatly and the number of free chains increases. That more polymeric surfactants molecules move to the interface of oil/water and rearrange at the interface of oil/water is believed to be the main reason of the ultra-low IFT (10⁻³ mN/m) that is obtained.     

Electrochemical Immunoassay for Carbohydrate Antigen‐125 Based on Polythionine and Gold Hollow Microspheres Modified Glassy Carbon Electrodes

A new electrochemical immunosensor for the detection of carbohydrate antigen‐125 (CA125), a carcinoma antigen, was developed by immobilization CA125 antibody (anti‐CA125) on gold hollow microspheres and porous polythionine (PTH) modified glassy carbon electrodes (GCE). The gold hollow microspheres provided a biocompatible microenvironment for proteins, and greatly amplified the coverage of anti‐CA125 molecules on the electrode surface. The performance and factors influencing the immunosensor were investigated in detail. The detection is based on the current change before and after the antigen‐antibody interaction. Under optimal conditions, the amperometric changes were proportional to CA125 concentration ranging from 4.5 to 36.5 U/mL with a detection limit of 1.3 U/mL (at 3σ). The CA125 immunosensor exhibited good precision, high sensitivity, acceptable stability, accuracy and reproducibility. The as‐prepared immunosensors were used to analyze CA125 in human serum specimens. Analytical results suggest that the developed immunoassay has a promising alternative approach for detecting CA125 in the clinical diagnosis.