Spectrophotometric Determination Of Rifampin in the Presence of its Degradation Products in Pharmaceutical Preparations

Abstract

The determination of rifampin in the presence of its main degradation products, 3-formyl rifampin and rifampin quinone using two spectrophotometric methods is described. Both Glenn's method and first derivative spectrophotometry were successfully adopted. No preliminary separation steps were required in either cases. Both methods gave accurate and reproducible results for the determination of the drug in dosage forms. The percentage recoveries ranged from 99.33% ±0.63 to 100.2% ± 0.44. The proposed methods are more simple, rapid than other existing methods and can be readily adopted in control laboratory.     

Potentiometric determination of mefenamic acid in pharmaceutical formulation by membrane sensor based on ion-pair with basic dye

The characteristics,performance and application of membrane sensors based on ion-pair Brilliant Green mefenamate are described.The sensor’s response to the mefenamate ion has the sensitivity of （86.0±2.0） mV/pC over the range of 9×10^-5-1×10^-2moI/Land the detection limit of 4.5×10^-5mol/L at pH 8.5-12.The sensor is easily assembled at a relatively low cost and has fast response time（5-10 s）.The proposed sensor displayed good selectivity for mefenamate ion in the presence of different substances.It was used to determine mefenamic acid in pharmaceuticals.     

Determination of nicotinamide by stopped-flow injection method in pharmaceutical formulations

A simple stopped-flow injection system with spectrophotometric detection was proposed for the determination of nicotinamide (NAM) in pharmaceutical formulations. In this system cyanogen chloride formed from the combination of an acidic KSCN with the NaClO streams reacts with injected NAM to form glutaconic aldehyde. Then the product of these three components was coupled with another buffered (pH 3.5) stream of barbituric acid and directed towards the detector. A 45 s after sample injection the pump was stopped for 130 s. During this time the reactants in the flow cell were provided with the required temperature (40 °C) by placing the cell in a home made cell jacket to increase the yield of the polymethine dye product. Eventually, the absorbance of the formed pink color dye was monitored spectrophotometrically at 560 nm and NAM in the concentration range of 1.0–25.0 μg/mL (R = 0.9974 and D.L = 0.5 μg/mL) was determined. The results obtained by this method were compared statistically and agree with those obtained by the method described in the British Pharmacopoeia.     

Determination of Total Chromium in Biological Samples by Automated Reagent Injection Chemiluminescence Analysis

A sensitive method for the determination of total chromium in real samples by flow injection–chemiluminescence (FI–CL) analysis was proposed. It was found that the CL intensity from luminol–lysozyme reaction could be markedly quenched, and the decrease of CL intensity was linear with the logarithm of Cr(III) concentrations over the range of 5.0 to 4000 pg mL^?1 with a detection limit of 2.0 pg mL^?1 (3σ) and relative standard deviations (RSDs) of 3.0, 2.6, and 2.0% for 10, 100, and 1000 pg mL^?1 Cr(III) (n = 7), respectively. At a flow rate of 2.0 mL min^?1, the whole process including sampling and washing could be accomplished within 36 s. The proposed CL method was successfully applied to the determination of total chromium in pharmaceutical capsules, a dietary supplement, and spiked human serum samples, with recoveries from 92.2 to 108.4% and RSDs of less than 4.0%. Using the homemade FI–CL model, the binding constant (K = 4.38 × 10⁶ L mol^?1) and the binding sites (n ≈ 1) of Cr(III) to lysozyme were given.     

A new DMAP-catalyzed and microwave-assisted approach for introducing heteroarylamino substituents at position-4 of the quinazoline ring

We report herein a new methodology for synthesizing quinazoline derivatives bearing a heteroarylamino moiety at position-4 of the quinazoline ring. As an alternative to the Buchwald–Hartwig cross-coupling reaction, which appears, until now, as the only efficient way to react 4-chloroquinazolines with numerous amino nitrogen-containing heterocycles displaying poor nucleophilicity, we developed a DMAP-catalyzed reaction involving microwave irradiation. Optimization of the reaction conditions led to the use of 30 mol % of DMAP in toluene, using a monomode microwave reactor and sealed vials. Moreover, the S_NAr reaction intermediate salt was isolated and fully characterized. Finally, the procedure was extended to two different 2-substituted-quinazoline series and also to various anilines, demonstrating that this approach was a general efficient way to access to such 4-substituted quinazoline scaffolds of high pharmaceutical interest.     

Quantification of erythromycin in pharmaceutical formulation by transmission Fourier transform infrared spectroscopy

A simple, cost-effective and environmental friendly analytical method was developed for the quantification of erythromycin in tablet formulation using transmission Fourier Transform Infrared (FT-IR) spectroscopy for routine quality control analysis. There is no need of sample preparation except pellet formation for FT-IR analysis. Use of solvent was totally avoided in this method. Calibration was carried out by using simple Beer’s law in the FT-IR region between 1743 and 1697 cm⁻¹. The excellent coefficient of determination (R² = 0.998) was achieved with 0.0247 and 1.14 root mean square error of prediction (RMSEP) and root mean square error of cross validation (RMSECV), respectively. The results of the study revealed that the transmission FT-IR spectroscopy could be effectively used for rapid determination of active ingredients like erythromycin in pharmaceutical formulations to control the quality of finished products.     

A review on key aspects of wet granulation process for continuous pharmaceutical manufacturing of solid dosage oral formulations

Wet granulation process is a major unit operation in production of pharmaceuticals as solid dosage oral formulation. Indeed, granulation is used to improve the formulation properties such as flowability, compressibility, and so on for pharmaceutical manufacturing. Different types of granulations can be used in pharmaceutical manufacturing in which the selection of proper process depends on the operational conditions as well as formulation properties. In current decades, twin-screw wet granulation has been of paramount interest owing to its superior properties. Pharmaceutical manufacturing industry are trying to move towards continuous mode by which the efficiency can be improved compared to the batch mode. Therefore, development of continuous granulation process is of great importance. In this review article, various processing units applicable for wet granulation of pharmaceutical formulations for solid dosage forms are reviewed and discussed. The advantages and disadvantages of the processes are discussed and listed along with modeling approaches for simulation of process. The governing models and numerical schemes applicable for design of wet granulation are also critically discussed. The main focus is on wet granulation as this method has attracted much attention in pharmaceutical processing.     

“The hidden power and competitive advantage of applying green chemistry metrics”

Green chemistry (GC) metrics provide insight into the relative waste, time and cost implications of pharmaceutical chemical processes and serve to guide scientists in the strategic application of resources to develop more efficient and sustainable processes. Examples of the application of GC metrics in evaluating pharmaceutical process efficiency and the subsequent development toward improvement exist in abundance from journals such as Organic Process Research and Development, Green Chemistry, or as encompassed by the winning examples from the ACS GCI Pharmaceutical Roundtable's [1] Peter J. Dunn award [2] or the US EPA's Green Chemistry Challenge award [3]. By their nature, GC metrics are continuously evolving but justify the necessary, unceasing investment in understanding and application as they offer unique, opportunistic insight serving to guide scientific resource deployment when developing greener pharmaceutical, chemical processes.     

Derivatization-free determination of aminoglycosides by CZE–UV in pharmaceutical formulations

Aminoglycosides are a relevant class of antibiotics widely used by medics and veterinaries. There are a variety of reasons that make their determination relevant, such as quality control, environment and food contamination assessment, drug-release studies, among others. The lack of a chromophore makes aminoglycoside spectrophotometric detection particularly challenging, often requiring derivatization. In this work, an indirect detection method, making use of imidazole as a probe, applying CZE was successfully tested. It did not require derivatization, which simplified the sample preparation. Suitable figures of merit were obtained; recoveries between 95 and 105%, adequate repeatability and precision, correlation coefficients (r) above 0.998, and limits of detection (LODs) of 3.2 and 11 mg/L for gentamicin and paromomycin, respectively. As a proof-of-concept, it was also applied in a simple controlled release experiment that was well fitted using the Hill equation.     

药学专业元素化学教学方法探究

元素化学是药学专业无机化学的重要组成部分,其内容繁多,规律性不强,传统教学方式枯燥乏味,影响了学生的学习兴趣。笔者针对这些问题,结合多年的教学经验,从优化教学内容和教学方法等方面对元素化学教学进行了探究。