has been determined by gas electron diffraction (GED) combined with microwave (MW) spectroscopic data. Ab initio calculations at the HF/3–21G* level were carried out and used as structural constraints in the data analysis. The torsional vibration of the methyl group was treated as a large-amplitude motion. The structural parameters were determined to be: rg(S---C2) = 1.719(2) Å, rg(C2=C3) = 1.370(3) Å, rg(C3---C6) = 1.497(6) Å, rg(C2---H) = 1.101(5) Å, CSC = 91.6(2)°, SC2C3 = 113.3(5)°, SC5C4 = 111.3(3)°, C2C3C6 = 123.2(11)° and C3C6H = 112(2)°. The values of r(S---C2) − r(S---C5) and r(C2=C3) − r(C4=C5) were fixed at the 3–21G* value of 0.002Å. Parenthesized values are the estimated limits of error (3σ) referring to the last significant digit. 相似文献
The molecular structure of 3-methylthiophene
has been determined by gas electron diffraction (GED) combined with microwave (MW) spectroscopic data. Ab initio calculations at the HF/3–21G* level were carried out and used as structural constraints in the data analysis. The torsional vibration of the methyl group was treated as a large-amplitude motion. The structural parameters were determined to be: rg(S---C2) = 1.719(2) Å, rg(C2=C3) = 1.370(3) Å, rg(C3---C6) = 1.497(6) Å, rg(C2---H) = 1.101(5) Å, CSC = 91.6(2)°, SC2C3 = 113.3(5)°, SC5C4 = 111.3(3)°, C2C3C6 = 123.2(11)° and C3C6H = 112(2)°. The values of r(S---C2) - r(S=C5) and r(C2=C3)-r(C4 =C5) were fixed at the 3–21G* value of 0.002 Å. Parenthesized values are the estimated limits of error (3σ) referring to the last significant digit. 相似文献
An analytical method was developed for Os-Re dating of molybdenite. The method is based on determination of Os and Re concentrations in molybdenite by isotope dilution inductively-coupled plasma mass spectrometry (ID-ICP-MS). Sample digestion and sample/spike equilibration were achieved by a two-stage autoclave-based procedure using a mixture of nitric and sulphuric acids. Os was separated from the sample digest by modified single-stage distillation of osmium tetraoxide (OsO4) using elevated temperature and on-line addition of hydrogen peroxide. OsO4(g) was trapped in a mixture of 0.05% thiourea in 0.05 M sodium hydroxide. An anion-exchange column was used to separate Re from excess Mo in the solution remaining after distillation. Os and Re isotope ratio measurements were performed by single-collector, double focusing inductively-coupled plasma mass spectrometry (ICP-MS) with on-line mass-bias correction. Typical instrumental precision was in the range 0.02-0.2% relative standard deviation (R.S.D.) depending on the analyte concentrations. Notorious Os memory effects in the ICP-MS introduction system were eliminated using 5% ammonia solution, both as matrix for final dilution of the trap mixture as well as for washing between the samples. The reproducibility of the entire analytical procedure was accessed by replicate dating of two molybdenite standards and three molybdenite separates, and was found to be in the range 0.87-1.52% R.S.D. Though accuracy of the method is limited by difficulties in evaluating exact concentration of Os in spike solution, ages obtained in the course of these work agrees well with previously published data. 相似文献
The pretreatment of waste-activated sludge (WAS) by electron beam irradiation was studied in order to improve anaerobic sludge
digestion. The irradiation dose of the electron beam was varied from 0.5 to 10 kGy. Batch and continuous-flow stirred tank
reactors (CFSTRs) were operated to evaluate the effect of the electron beam pretreatment on anaerobic sludge digestion. Approximately
30–52% of the total chemical oxygen demand (COD) content of the WAS was solubilized within 24 h after electron beam irradiation.
A large quantity of soluble COD, protein, and carbohydrates leached out from cell ruptures caused by the electron beam irradiation.
Volatile fatty acids production from the irradiated sludge was approx 90% higher than that of the unirradiated sludge. The
degradation of irradiated sewage sludge was described by two distinct first-order decay rates (k1 and k2). Most initial decay reaction accelerated within 10 d, with an average k1 of 0.06/d for sewage sludge irradiated at all dosages. The mean values for the long-term batch first-order decay coefficient
(k2) were 0.025/d for irradiated sewage sludge and 0.007/d for unirradiated sludge. Volatile solids removal efficiency of the
control reactor fed with unirradiated sewage sludge at a hydraulic retention time (HRT) of 20 d was almost the same as that
of the CFSTRs fed with irradiated sludge at an HRT of 10 d. Therefore, disintegration of sewage sludge cells using electron
beam pretreatment could reduce the reactor solid retention time by half. 相似文献
ABSTRACT Esterification of isoamyl alcohol with acetic acid was studied using different ion-exchange resins, namely Amberlyst 15 dry, Amberlyst 16 wet, Amberlite 120-IR. Esterification was carried out using different esterification methods that are quite new (ohmic, ultrasonic probe, and ultrasonic bath) and the results were compared with microwave-assisted esterification (MAE). The highest isoamyl acetate yield (99%) was obtained by MAE, using a mixture of acetic acid and isoamyl alcohol (mole ratio of 1:2) after 2?h of reaction time. In this process, 2% Amberlyst 15 dry was used. MAE had the least specific energy consumption (0.42?kWh/g isoamyl acetate) and specific CO2 emission (34?g/g isoamyl acetate). According to the images obtained by scanning electron microscopy, lower amounts of Amberlyst 15 dry beads were destroyed by MAE method compared to other esterification methods. In conclusion, MAE proved to be an economic and environmentally-friendly method for esterification of different flavoring compounds. 相似文献
Deoxyfluorination of alcohols was carried out using N,N-diethyl-α,α-difluoro-(m-methylbenzyl)amine (DFMBA). Primary alcohols were effectively converted to fluorides under microwave irradiation or conventional heating. Deoxyfluorination of an anomeric hydroxy group in sugars by DFMBA proceeded at below room temperature and glycosyl fluorides could be obtained in good yields. The deoxyfluorination reaction chemoselectively proceeded and various protecting groups on the sugar can survive under the reaction conditions. 相似文献
Efforts were made to assess the efficiency of an anaerobic filter packed with porous floating ceramic media and to identify
the optimum operational condition of anaerobic filter as a pretreatment of swine wastewater for the subsequent biological
removal of nitrogen and phosphorus. A stepwise decrease in hydraulic retention time (HRT) and an increase in organic loading
rate (OLR) were utilized in an anaerobic filter reactor at mesophilic temperature (35°C). The optimum operating condition
of the anaerobic filter was found to be at an HRT of 1 d. A soluble chemical oxygen demand (COD) removal efficiency of 62%
and a total suspended solids removal efficiency of 39% at an HRT of 1 d were achieved with an OLR of 16.0 kg total COD/(m3·d), respectively. The maximum methane production rate approached 1.70 vol of biogas produced per volume of reactor per day
at an HRT of 1 d. It was likely that the effluent COD/total Kjeldahl nitrogen ratio, of 22, the COD/total phosphorous ratio
of 47, and the high effluent alkalinity >2500 mg/L as CaCO3 of the anaerobic filter operated at an HRT of 1 d was adequate for the subsequent biological removal of nitrogen and phosphorus. 相似文献
A microwave-assisted fluorination method for 1,3-dicarbonyl compounds using Selectfluor® has been developed. 2-Monofluorinated products can be obtained in high yield in neutral reaction conditions with addition of 1 eq. of Selectfluor®. Treatment of 1,3-dicarbonyls with 3 eq. of Selectfluor® in the presence of tetrabutylammonium hydroxide (TBAH) as the base results in the formation of 2,2-difluorinated derivatives only. 相似文献