考虑材料熔化潜热的高温高压本构

本文在修正的SCG模型基础上，提出了一种考虑了熔化潜热的高温高压本构.该本构所给出的铝的剪切模量的变化分为三个阶段：加工硬化，温度软化和熔化，并在完全熔化点处变为零.并且在前两个阶段，计算的结果与修正的SCG模型所给出的剪切模量的差别不超过4%，这一差别是在动高压实验误差范围之内的，在熔化区所给出的剪切模量与现有的实验数据相符合. 关键词： 剪切模量 熔化潜热 修正的SCG模型 动高压实验     

国际热核聚变实验堆(ITER)计划

聚变能目前是认识到的可以最终解决人类能源和环境问题的最重要的途径之一，经过许多科学工作者半个多世纪的努力，磁约束聚变研究取得了重大的进展，集成当今国际受控磁约束核聚变研究的主要科学和技术成果，合作建立与未来实用聚变堆规模相比拟的受控热核聚变实验堆ITER(international thermonuclear experimental reactor)，成为国际上大家的共识，文章就ITER及相关的情况进行一些介绍。     

Inorganic Sol-Gel Preparation of Medium Sized Microparticles of Li2TiO3 from TiCl4 as Tritium Breeding Material for Fusion Reactors

Microspheres of Li₂TiO₃ were fabricated by a classical, inorganic sol-gel process from commercially available TiCl₄. Elaborated process consists of the following main steps: (1) dissolving of TiCl₄ in concentrated aqueous HCl and addition of LiOH; (2) formation of sol emulsion in 2-ethylhexanol-1 containing the surfactant SPAN-80 (EH); (3) gelation of emulsion drops by extraction of water with partially dehydrated EH; (4) impregnation of gel to Li:Ti molar ratio MR = 2; (5) thermal treatment at 1200°C in order to receive chloride free product. This temperature can be significantly lowered (to 750°C) by dechlorination starting solution TiCl₄ by chemical treatment of the with nitric acid to form of nitrate-stabilized titania sols. Tritium release from sol-gel made Li₂TiO₃ microspheres were found very close to that observed for other traditional materials, however for the first sample process starts slightly earlier.     

Synthesis of orthogonal end functionalized oligoethylene glycols of defined lengths

The synthesis of oligoethylene glycols of defined lengths possessing different end functionalities is described. The utility of these molecules towards the development of a generic membrane anchor is demonstrated.     

光电传感器在战场侦察车上的应用与发展

通过对国内外战场侦察车光电传感器资料及实物的查阅和调研，并通过总结几十年的工作和设计经验，论述了战场侦察车上光电传感器在未来数字化战争中的作用和地位。对国外传感器系统在侦察车上的应用状况进行了分析，着重对各种传感器进行分析与比较，并对多光谱技术、多传感器的图像融合技术以及桅杆的应用和要求提出看法。最后对我国光电传感器在战场侦察车上的应用与发展提出了建议。     

On the dynamic electromechanical loading of dielectric elastomer membranes

Dielectric elastomer actuators (DEAs) have received considerable attention recently due to large voltage-induced strains, which can be over 100%. Previously, a large deformation quasi-static model that describes the out-of-plane deformations of clamped diaphragms was derived. The numerical model results compare well with quasi-static experimental results for the same configuration. With relevance to dynamic applications, the time-varying response of initially planar dielectric elastomer membranes configured for out-of-plane deformations has not been reported until now. In this paper, an experimental investigation and analysis of the dynamic response of a dielectric elastomer membrane is reported. The experiments were conducted with prestretched DEAs fabricated from 0.5 mm thick polyacrylate films and carbon grease electrodes. The experiments covered the electromechanical spectrum by investigating membrane response due to (i) a time-varying voltage input and (ii) a time-varying pressure input, resulting in a combined electromechanical loading state in both cases. For the time-varying voltage experiments, the membrane had a prestretch of three and was passively inflated to various predetermined states, and then actuated. The pole strains incurred during the inflation were as high as 25.6%, corresponding to slightly less than a hemispherical state. On actuation, the membrane would inflate further, causing a maximum additional strain of 9.5%. For the time-varying pressure experiments, the prestretched membrane was inflated and deflated mechanically while a constant voltage was applied. The membrane was cycled between various predetermined inflation states, the largest of which was nearly hemispherical, which with an applied constant voltage of 3 kV corresponded to a maximum polar strain of 28%. The results from these experiments reveal that the response of the membrane is a departure from the classical dynamic response of continuum membrane structures. The dynamic response of the membrane is that of a damped system with specific deformation shapes reminiscent of the classical membrane mode shapes but without same-phase oscillation, that is to say all parts of the system do not pass through the equilibrium configuration at the same time. Of particular interest is the ability to excite these deformations through a varying electrical load at constant mechanical pressure.     

溶膜预富集-石墨炉原子吸收法测定痕量钯

强酸性条件下 ,钯 (Ⅱ )与 5 [( 5 氯 2 吡啶 )偶氮 ] 2 ,4 二氨基甲苯 ( 5 Cl PADAT)生成紫红色螯合物 ,该螯合物可与十二烷基苯磺酸钠 (SDBS)生成离子缔合物 ,离子缔合物经 0 .3μm孔径的硝化纤维微孔滤膜富集后 ,于小体积 ( 0 .5mL)的浓硫酸中溶膜 ,用石墨炉原子吸收法 (GFAAS)测定 ,富集倍数可达 2 0 0倍 ,钯含量在 4.69× 1 0 - 1 2 ～ 7.0 9× 1 0 - 9mol/L范围内线性良好 ,检出限为 1 .78×1 0 - 1 2 mol/L。方法用于海水中痕量钯的测定。     

D—^3He聚变动力可行性研究

本文首先简要地讨论D-3He聚变的物理要求并与D-T聚变作相应的比较,然后运用目前的约束定律和第一稳定区β极限,对计划的近期ETR规模装置(如CIT,TIBER,FER,NET)进行D-3He得失相当和点火实验的可行性研究,并对高径比第二稳定区D-3He托卡马克堆进行参数学研究,最后指出潜在的缩短商用化进程可能性。     

Determination of the rate of rapid lipid transfer induced by poly(ethylene glycol) using the SLM Fourier transform phase and modulation spectrofluorometer

Rate constants were determined for the transfer of the fluorescent lipid probe 1-palmitoyl-2-[[2-[4-(6-phenyl-trans-1,3,5-hexatrienyl)phenyl]ethyl] oxy]carbonyl]-3-sn-phosphatidylcholine (DPHpPC) between large, unilamellar extrusion vesicles composed either of dipalmitoyl phosphatidylcholine (DPPC) or of DPPC mixed with a small amount (0.5 mol%) of lyso phosphatidylcholine (Lyso PC). Transfer of the lipid probe in the presence of varying concentrations of poly(ethylene glycol) (PEG) was monitored using the SLM 48000-MHF Multi-Harmonic Fourier Transform phase and modulation spectrofluorometer to collect multifrequency phase and modulation fluorescence data sets on a subsecond time scale. The unique ability of this instrument to yield accurate fluorescence lifetime data on this time scale allowed transfer to be detected in terms of a time-dependent change in the fluorescent lifetime distribution associated with the lipid-like DPHpPC probe. This probe demonstrates two short fluoresence decay times (ca. 1.1–1.4 and 4.3–4.8 ns) in a probe-rich environment but a single long lifetime (ca. 7 ns) in a probe-poor environment. A simple two-state model for initial lipid transfer was used to analyze the multifrequency data sets collected over a 4-s time frame to obtain the time rate of change of the concentrations of donor and acceptor probe populations following rapid mixing of vesicles with PEG. The ability to measure fluorescence lifetimes on this time scale has allowed us to show that the of rate of lipid transfer increased dramatically at 35% PEG in both fusing and nonfusing vesicle systems. These results are interpreted in terms of a distinct interbilayer structure associated with intimate bilayer contact induced by high and potentially fusogenic concentrations of PEG.     

Pulsed gas lenses

The concept of a pulsed gas lens is proposed. Potential applications are envisaged and preliminary experiments with pulsed ray refraction are reported.