A new luciferase reporter gene assay for the detection of androgenic and antiandrogenic effects based on a human prostate specific antigen promoter and PC3/AR human prostate cancer cells.

We developed a new mammalian cell-based luciferase reporter gene assay for androgenic and antiandrogenic activities of chemicals and environmental samples. Environmental samples usually have a complex matrix that may contain the constituents acting as androgen receptor (AR) agonists, AR antagonists or aryl hydrocarbon receptor (AhR) agonists. AhR agonists are known to elicit the antiandrogenic effect through cross-talk between AR and AhR signal transduction pathways. In this study, PC3/AR human prostate carcinoma cells were transiently transfected with a prostate-specific antigen (PSA) promoter-driven luciferase expression plasmid. The cells were treated with a test compound or an environmental sample for 24 h at 37 degrees C and then measured for luciferase activity. The luciferase activity was induced by dihydrotestosterone (DHT) in a concentration-dependent manner in a concentration range from 10 fM to 1 nM. R1881, a synthetic androgen receptor agonist, induced luciferase activity and its inductive effects was additive to that of DHT. The luciferase activity was not induced by cortisol, a glucocorticoid, progesterone, a progestin, and 17beta-estradiol, an estrogen in a concentration range of up to 1 microM. DHT-induced luciferase activity was reduced by bicalutamide and cyproterone acetate, AR antagonists, and also by benzo[a]pyrene, an aryl hydrocarbon receptor agonist, through AhR-mediated pathways. All of these findings indicate that the present assay system correctly responds to AR agonists, AR antagonists and AhR agonist and, therefore, it is a powerful tool for the sensitive and selective screening of chemicals and environmental samples for their androgenic and antiandrogenic activities. We developed the first assay system, in which the expression of luciferase was driven by the promoter of a prostate-specific antigen gene, a typical human androgen-regulated gene.     

An economic analysis of microbial reduction of sulfur dioxide as a means of byproduct recovery from regenerable processes for flue gas desulfurization

Applied Biochemistry and Biotechnology - In summary, it appears that the microbial reduction process is clearly not competitive with conventional SO2-reduction techniques when glucose (DE95 corn...     

A model for noise processes in semiconductor laser amplifiers, part 1: the travelling-wave semiconductor laser amplifier

A new model for the noise processes in a travelling-wave semiconductor laser amplifier is presented. This model is based on applying perturbation techniques to the basic travelling-wave rate equations to deduce the noise rate equations. These equations are then used to calculate the power spectral densities of the intensity, electron density and phase noises introduced into a single signal mode propagating through the amplifier. The model can be applied to any gain profile within the amplifier, ranging from unsaturated to completely saturated. Furthermore, in contrast to most other semiconductor laser amplifier models, this model does not require the homogenization of the photon field over the length of the device.     

Determination of the rate of rapid lipid transfer induced by poly(ethylene glycol) using the SLM Fourier transform phase and modulation spectrofluorometer

Rate constants were determined for the transfer of the fluorescent lipid probe 1-palmitoyl-2-[[2-[4-(6-phenyl-trans-1,3,5-hexatrienyl)phenyl]ethyl] oxy]carbonyl]-3-sn-phosphatidylcholine (DPHpPC) between large, unilamellar extrusion vesicles composed either of dipalmitoyl phosphatidylcholine (DPPC) or of DPPC mixed with a small amount (0.5 mol%) of lyso phosphatidylcholine (Lyso PC). Transfer of the lipid probe in the presence of varying concentrations of poly(ethylene glycol) (PEG) was monitored using the SLM 48000-MHF Multi-Harmonic Fourier Transform phase and modulation spectrofluorometer to collect multifrequency phase and modulation fluorescence data sets on a subsecond time scale. The unique ability of this instrument to yield accurate fluorescence lifetime data on this time scale allowed transfer to be detected in terms of a time-dependent change in the fluorescent lifetime distribution associated with the lipid-like DPHpPC probe. This probe demonstrates two short fluoresence decay times (ca. 1.1–1.4 and 4.3–4.8 ns) in a probe-rich environment but a single long lifetime (ca. 7 ns) in a probe-poor environment. A simple two-state model for initial lipid transfer was used to analyze the multifrequency data sets collected over a 4-s time frame to obtain the time rate of change of the concentrations of donor and acceptor probe populations following rapid mixing of vesicles with PEG. The ability to measure fluorescence lifetimes on this time scale has allowed us to show that the of rate of lipid transfer increased dramatically at 35% PEG in both fusing and nonfusing vesicle systems. These results are interpreted in terms of a distinct interbilayer structure associated with intimate bilayer contact induced by high and potentially fusogenic concentrations of PEG.     

Rhodathiaboranes with `anomalous' electron counts: synthesis, structure and reactivity

Analysis of the structures of 8,8-(PPh₃)₂-8,7-nido-RhSB₉H₁₀ and 9,9-(PPh₃)₂-9,7,8-nido-RhC₂B₈H₁₁ by RMS misfit calculations has confirmed that these rhodaheteroboranes possess nido 11-vertex cluster geometries in apparent contravention of Wade's rules. However, examination of the molecular structures of both species shows that the {RhP₂} planes are inclined by ca. 66° with respect to the metal-bonded SB₃ or CB₃ faces, and that two weak ortho-CHRh agostic interactions occupy the vacant co-ordination position thereby created. As a consequence of these agostic bonds the Rh atom, and hence the overall cluster, is provided with an additional electron pair, meaning that their nido structures are now fully consistent with Wade's rules. The chelated diphosphine compound 8,8-(dppe)-8,7-nido-RhSB₉H₁₀ is similar to the PPh₃ compound in showing the same agostic bonding. Attempts to prepare a bis-P(OMe)₃ analogue result in ligand scavenging and the formation of 8,8,8-{P(OMe)₃}₃-8,7-nido-RhSB₉H₁₀. Similarly, reaction between Cs[6-arachno-SB₉H₁₂] and RhCl(dmpe)CO does not result in CO loss but in formation of 8,8-(dmpe)-8-(CO)-8,7-nido-RhSB₉H₁₀, shown to exist as a mixture of two of three possible rotamers. Deprotonation of 8,8-(PPh₃)₂-8,7-nido-RhSB₉H₁₀ and 8,8-(dppe)-8,7-nido-RhSB₉H₁₀ with MeLi yields the anions [1,1-(PPh₃)₂-1,2-closo-RhSB₉H₉]⁻ and [1,1-dppe-1,2-closo-RhSB₉H₉]⁻, respectively, with octadecahedral cage structures. It is argued that anion formation causes the agostic bonding to be `switched-off' and results in the cluster adopting the closo architecture predicted by Wade's rules. This structural change is fully reversible on reprotonation, and if reprotonation of [1,1-(dppe)-1,2-closo-RhSB₉H₉]⁻ is carried out in MeCN, the product 8,8-(dppe)-8-(MeCN)-8,7-nido-RhSB₉H₁₀ forms. Interestingly, 8,8-(dppe)-8-(MeCN)-8,7-nido-RhSB₉H₁₀ reconverts to 8,8-(dppe)-8,7-nido-RhSB₉H₁₀ on standing in CDCl₃, suggesting that the agostic bonding is sufficiently strong to displace co-ordinated MeCN. All new compounds are fully characterised by multinuclear NMR spectroscopy and, in many cases, by single crystal X-ray diffraction.     

The oxymercuration—demercuration of alkenylsilanes in aqueous tetrahydrofuran

The oxymercuration—demercuration (OM—DM) of representative trimethylsilylalkenes in aqueous tetrahydrofuran was investigated. Vinyltrimethylsilane gives only the anti-Markovnikov alcohol, 2-trimethylsilylethanol in 90% yield. Allyltrimethylsilane gives mainly allylmercuric acetate which reacts further to give a 1,3-dimercurated-2-propanol. This species reacts slowly with allyltrimethylsilane to give allylmercuric acetate. 3-Buten-1-yltrimethylsilane gives only the Markovnikov product, 1-trimethylsilyl-3-butanol in 99% yield. cis-1-Propenyl-trimethylsilane gives 1-trimethylsilyl-2-propanol in 44% yield along with cleavage products. The formation of one of these products, 2-propanol, was found by PMR to arise from the OM—DM of cis-1-propenylmercuric acetate which gives the 1,1-dimercurated-2-propanol. While the oxymercuration of cis-1-propenyl-mercuric acetate is regiospecific giving exclusive placement of the mercury α to the silicon, it is completely nonstereospecific giving equal amounts of diastereomeric adducts. The OM—DM of 2-propenyl trimethylsilane (XIX) leads only to desilylation and oxidation products. Possible reasons for the diverse behavior of these silylated alkenes are discussed.     

Study of migration of active components of phosphorescent oxygen sensors for food packaging applications

A study of migration of the active components of oxygen sensors into food is presented. Six types of sensors, based on different oxygen sensitive dyes (two metalloporphyrins and one ruthenium dye), polymers (polystyrene and polysulfone) and support materials, were exposed to a number of standard ‘food simulants’ recommended by FDA/EU guidelines and then assayed for migration or sensor components and changes in oxygen calibration. Both metalloporphyrin sensor dyes leached only in olive oil and in 95% ethanol (used as a positive control), at maximum levels of 19.22 μg/dm² for PtOEPK and 113.96 μg/dm² for PtTFPP. The RuDPP dye showed maximum leaching in 95% ethanol (25.19 μg/dm²) while also migrating in an acidic aqueous simulant. Planar supports such as polyester tended to enhance the stability of the sensor. Migration of the styrene monomer from the polystyrene encapsulation medium was concluded to be low enough to be insignificant. Migration of sensor components was shown to correlate with the changes in sensor response to oxygen. Based on these results, sensor combinations were ranked on the basis of their resistance to leaching and their general stability, safety and suitability for use on a large scale in packaged foods and related food applications was proven.     

Thiazole orange-peptide conjugates: sensitivity of DNA binding to chemical structure

[structure: see text] Derivatives of the highly fluorescent and DNA-binding dye thiazole orange (TO) are described that feature appended peptides. Functionalization of TO can be achieved at either of the endocyclic nitrogens, and the photophysical properties and DNA-binding modes are sensitive to the position of the tethered peptide. A series of TO-peptide conjugates are described, demonstrating the utility of a solid-phase synthesis approach to their preparation and illustrating how the photophysical and DNA-binding properties of the compounds are influenced by chemical structure.     

Mechanisms of intrinsic bioremediation of gas condensate hydrocarbons in saturated soil

Applied Biochemistry and Biotechnology - The addition of gas condensate hydrocarbons to saturated soil from a gas production site stimulated sulfate reduction under anaerobic and oxygen-limiting...