介孔分子筛MCM-41表面的有机胺功能化及其应用

采用γ-胺丙基三甲氧基硅烷与表面硅羟基的反应,对介孔分子筛MCM-41进行了有机胺功能化.并对其进行了表征.XRD、比表面积测定、元素分析、TG、FT-IR和TEM的测定结果均表明,MCM-41表面成功地接枝上了有机胺功能基团而六方结构特征基本保持.在有机胺功能化的MCM-41上固载Ru基催化剂,并将其用于CO2加H2合成HCOOH反应,所显示的活性优于相应的均相催化剂,并且该催化剂具有较好的回收再用性能.     

Ti接枝MCM-41催化剂的结构设计及化学亲和选择性研究

 用二氯化钛茂作为活性物种的来源，利用Si－MCM－41催化剂表面羟基的反应性，得到了Ti接枝MCM－41催化剂的两种结构模型．结构表征结果表明，Ti接枝MCM－41催化剂不仅长程结构好，孔径分布均一，而且催化剂表面活性中心含量高．两种结构模型催化剂上芳烃羟化反应性能表明，Ti接枝MCM－41催化剂表面的亲水／憎水性可以在较宽的范围内调变，从而可实现控制芳烃羟化的化学亲和选择性．另外，研究结果还表明，Ti接枝MCM－41催化剂具有很好的活性稳定性．     

Formation at low surfactant concentrations and characterization of mesoporous MCM-41

At low concentrations of cetyltrimethylammonium bromide,all silica-based mesoporous materials with hexagonal phase have been synthesized via interactions between self-assembled surfactant molecule aggregates and aniomc silicate polymers.The resulting materials are characterized by XRD,FT-IR,solid state 29Si MAS NMR,thermal analysis and N2 adsorption-desorption measurements.After soluble ions are removed,the interactors between surfactant micelles and silicate polymers are reorganized and then form mesostructures 1 he hexagonal framework is sonsistent with amorphous silica gel.The structures of materials depend on the synthesis conditions Hydrothermal process improves the interactions between molecules and increases the degree of framework silicon atom polymerization The.surface area and the mesopore volume of the material prepared at 100℃ increase by 87% and 71 %,respectively,compared with those obtained at room temperature.     

中孔分子筛SO42-/Zr-MCM-41催化裂解聚丙烯反应研究

采用水热合成法制备了不同硅锆比的中孔分子筛Zr-MCM-41,用强酸性基团SO42-对其进行修饰,制得SO42-/Zr-MCM-41中孔分子筛.采用XRD、FT-IR、NH3-TPD及氮气吸附脱附等技术对其结构和酸强度进行表征.通过改变硅锆比、负载不同的酸性基团对Zr-MCM-41的酸性进行调变,并将其用于催化聚丙烯(PP)的裂解反应,结果表明S i/Zr=40的SO42-/Zr-MCM-41具有较好的催化裂解活性.另外,与热裂解以及HZSM-5和Zr-MCM-41为催化剂时PP的裂解反应结果进行了比较,结果证明SO42-/Zr-MCM-41不仅具有较高的裂解转化率,而且具有较高的液体产物收率,适宜于空间位阻较大的PP的催化裂解反应.     

PtRu纳米线的合成及其在直接甲醇燃料电池阳极中的催化活性

 分别以SBA-15和MCM-41介孔分子筛作模板剂,采用浸渍还原法制备了纵横比及合金度不同的双组元PtRu纳米线和纳米棒电催化剂. 透射电镜、 X射线衍射表征和电化学测试结果表明, PtRu纳米线具有较高的合金度和较大的纵横比,在甲醇硫酸溶液中表现出更好的电催化活性. 初步探讨了PtRu纳米线催化剂的合金度和纵横比对其电催化活性和电极性能的影响.     

MCM-41-HY复合分子筛的合成及其在深度加氢脱硫中的应用

在水热条件下合成了包覆型MCM-41-HY复合分子筛.采用XRD、N2气吸附和SEM等方法对其进行了表征.结果表明,MCM-41-HY复合分子筛和MCM-41与H型Y沸石(HY)的机械混合物明显不同,在复合分子筛MCM-41-HY中,中孔相MCM-41附晶生长在HY沸石上,将HY包覆起来.以二苯并噻吩为模型化合物,考察了该材料担载NiMo催化剂的加氢脱硫活性.结果表明,MCM-41-HY复合分子筛与MCM-41和HY的机械混合物担载NiMo催化剂的加氢脱硫(HDS)活性相当,但MCM-41-HY复合分子筛担载NiMo催化剂的裂化活性较低.其裂化活性不同的原因在于其载体孔道结构和酸性位的分布不同.     

铝镧修饰MCM-41介孔分子筛的合成、表征及在乙氧基化反应中的催化性能

以十六烷基三甲基溴化铵(CTAB)为模板剂,正硅酸乙酯(TEOS)为硅源,乙二胺为碱性介质,水热法合成了硅铝、硅镧及硅(铝 镧)摩尔比为30的Al-MCM-41、La-MCM-41和Al-La-MCM-41介孔分子筛,通过XRD、IR、NH3-TPD吸附脱附、BET、热分析及CCl4吸附等方法对分子筛的晶体结构和表面物性进行了研究,XRD及BET研究结果表明,所合成的分子筛具有典型的六方介孔结构特征及较大的比表面积.NH3-TPD结果表明所合成的介孔分子筛均达到中强酸酸度.将Al-MCM-41、La-MCM-41和Al-La-MCM-41分别用于催化乙氧基化反应,研究结果表明Al-La-MCM-41具有更高的催化活性,Al-La-MCM-41为正辛醇质量的5%,反应温度为120℃,反应压力0.2MPa,n(醇)∶n(环氧乙烷)=1∶3时,正辛醇聚氧乙烯醚产品的收率达92%.     

全硅MCM-41担载的加氢脱硫催化剂的TPR研究

用TRP技术研究了以全硅MCM-41(Si-MCM-41)和HNO3交换的全硅MCM-41(H-MCM-41)为载体制备的Ni-Mo、Co-Mo和Ni-W加氢脱硫(HDS)催化剂的还原性能，并以0．8(wt)％二苯并噻吩(DBT)的十氢萘溶液为模型化合物，在高压固定床反应器上考察了上述催化剂的加氢脱硫(HDS)反应性能。结果表明，Si-MCM-41经稀HNO3交换后，所担载的Ni-Mo和Ni-W催化剂还原性能、HDS活性和加氢活性有显著变化，但对Co-Mo催化剂影响不大。这说明在Ni-Mo／H-MCM-41和Ni-W／H-MCM-41中可能存在氢溢流现象，DBT的HDS活性与载体表面酸性和氢溢流有关。     

A characterization of Chebyshev curves inR n

Given a totally ordered setT containing at leastn+1 elements (say a subset ofR ¹), the graph of the functiona:TR ⁿ is called a Chebyshev curve (inR ⁿ) if the determinant of the matrix (a(t ₁),a(t ₂), ...,a(t _n)) is either positive whenevert ₁<t ₂<...<t _n or negative whenevert ₁<t ₂<...<t _n. For finiteT a characterization of these curves (sequences) has been given by the author.In this paper the result is extended to non-finiteT. The characterization proved here is an improved (reformulated) version of that given by the author for infiniteT.     

A discrepancy theorem concerning polynomials of best approximation inL w p [−1, 1]

Letw be a suitable weight function,B _n,p denote the polynomial of best approximation to a functionf inL _w ^p [–1, 1],v _n be the measure that associates a mass of 1/(n+1) with each of then+1 zeros ofB _n+1,p–B _n,p and be the arcsine measure defined by . We estimate the rate at which the sequencev _n converges to in the weak-^* topology. In particular, our theorem applies to the zeros of monic polynomials of minimalL _w ^p norm.This author gratefully acknowledges partial support from NSA contract #A4235802 during 1992, AFSOR Grant 226113 during 1993 and The Alexander von Humboldt Foundation during both of these years.