Mercury removal from aqueous solution and flue gas by adsorption on activated carbon fibres

The use of two activated carbon fibres, one laboratorial sample prepared from a commercial acrylic textile fibre and one commercial sample of Kynol^®, as prepared/received and modified by reaction with powdered sulfur and H₂S gas in order to increase the sulfur content were studied for the removal of mercury from aqueous solution and from flue gases from a fluidized bed combustor. The sulfur introduced ranged from 1 to 6 wt.% depending on the method used. The most important parameter for the mercury uptake is the type of sulfur introduced rather than the total amount and it was found that the H₂S treatment of ACF leads to samples with the highest mercury uptake, despite the lower sulfur amount introduced. The modified samples by both methods can remove HgCl₂ from aqueous solutions at pH 6 within the range 290-710 mg/g (ACF) which can be favourably compared with other studies already published. The use of a filter made with an activated carbon fibre modified by powdered sulfur totally removed the mercury species present in the flue gases produced by combustion of fossil fuel.     

The structure of an Fe monolayer on the Ni (111) surface. A density-functional study using the generalized gradient approximation

Using a density-functional method that employs linear combinations of atomic orbitals as basis sets, nonlocal norm-conserving pseudopotentials and the generalized gradient approximation for exchange and correlation, we found that at 0 K the atoms of an Fe monolayer on the Ni (111) surface occupy hcp rather than fcc sites, in keeping with previous predictions made using the ab initio all-electron full-potential linearized augmented plane wave method with the local spin density approximation.     

Nonparametric Density Estimation in Hidden Markov Models

Let { X n} be a Markov chain that is either f -mixing or satisfies the Poisson equation.In this note we obtain the convergence rate under L 1 -criterion for bounded functions of the X k 's. And in the hidden Markov model setup { (X n ,Y n ) }we study the kernel estimate of the density of the observed variables { Y n }when a 'stable' status is reached.     

Approximating the single source unsplittable min-cost flow problem

In the single source unsplittable min-cost flow problem, commodities must be routed simultaneously from a common source vertex to certain destination vertices in a given graph with edge capacities and costs; the demand of each commodity must be routed along a single path so that the total flow through any edge is at most its capacity. Moreover, the total cost must not exceed a given budget. This problem has been introduced by Kleinberg [7] and generalizes several NP-complete problems from various areas in combinatorial optimization such as packing, partitioning, scheduling, load balancing, and virtual-circuit routing. Kolliopoulos and Stein [9] and Dinitz, Garg, and Goemans [4] developed algorithms improving the first approximation results of Kleinberg for the problem of minimizing the violation of edge capacities and for other variants. However, known techniques do not seem to be capable of providing solutions without also violating the cost constraint. We give the first approximation results with hard cost constraints. Moreover, all our results dominate the best known bicriteria approximations. Finally, we provide results on the hardness of approximation for several variants of the problem. Received: August 23, 2000 / Accepted: April 20, 2001?Published online October 2, 2001     

纳米晶ZrO2:Er3+-Yb3+的制备及其室温上转换发射

用化学共沉淀法制备了ZrO₂:Er³⁺-Yb³⁺纳米晶粉体，所制备的纳米晶粉体具有较强的室温上转换发射和红外发射.研究了样品的晶体结构和上转换发光性质随着Yb³⁺掺杂浓度和煅烧温度的变化关系.通过X射线衍射谱分析发现，经800℃煅烧2h后得到的ZrO₂:Er³⁺-Yb³⁺纳米晶是四方相和单斜相的混合结构，经950℃煅烧2h后得到的样品以单斜相为主，随着Y     

退火温度对低温生长MgxZn1－xO薄膜光学性质的影响

用射频磁控溅射法在80℃衬底温度下制备出Mg_xZn_1-xO(x=0.16)薄膜，用X射线衍射(XRD)、光致发光(PL)和透射谱研究了退火温度对Mg_xZn_1-xO薄膜结构和光学性质的影响.测量结果显示，Mg_xZn_1-xO薄膜为单相六角纤锌矿结构，并且具有沿c轴的择优取向；随着退火温度的升高，(002)XRD峰强度、平均晶粒尺寸和紫外PL峰强度增大，(002)XRD峰半高宽(F 关键词： xZn_1-xO薄膜')" href="#">Mg_xZn_1-xO薄膜 射频磁控溅射 退火     

Upconversion luminescence of Tm^3＋/Yb^3＋ codoped oxyfluoride glasses

Novel oxyfluoride glasses are developed with the composition of 30SiO2-15Al2O3-28PbF2-22CdF2-0.1TmF3 - xYbF3 - （4.9 - x） AlF3（x=0, 0.5, 1.0, 1.5, 2.0） in tool fraction, Furthermore, the upconversion luminescence characteristics under a 970nm excitation are investigated. Intense blue, red and near infrared luminescences peaked at 453nm, 476nm, 647nm and 789nm, which correspond to the transitions of Tm^3＋： ^1D2 →^3F4, ^1G4 →^3H6, ^1G4 →^3F4, and ^3H4 →^3H6, respectively, are observed. Due to the sensitization of Yb^3＋ ions, all the upconversion luminescence intensities are enhanced considerably with Yb^3＋ concentration increasing. The upconversion mechanisms are discussed based on the energy matching rule and quadratic dependence on excitation power. The results indicate that the dominant mechanism is the excited state absorption for those upconversion emissions.     

环境光对PE塑料薄膜近红外激光拉曼光谱的影响

探讨了环境光自然光和室内荧光灯光的存在,对PE透明塑料薄膜的近红外激光拉曼光谱的影响.研究表明不同的环境光,会对近红外拉曼光谱产生不同的明显特征峰.自然光干扰产生的是以倒峰群形式为主,而室内荧光灯光造成的干扰主要以尖锐的脉冲峰形式.虽干扰表现形式不同,但都有严重地影响,在测定时一定要引起重视,不能忽略.建议在进行透明塑料近红外拉曼光谱检测时,须在暗室或暗罩遮光保护中进行,以完全隔离环境光的影响.     

Far-infrared signature of animal tissues characterized by terahertz time-domain spectroscopy

We present terahertz time-domain spectroscopy characterization of various animal tissues obtained from pork and rats. As the sensitivity of terahertz radiation to polar molecules of water is very high, biological tissues with high level of hydration show strong absorption at terahertz frequencies. The experimental data indicate that skin, fat and lean pork tissues have different frequency-dependent response to terahertz radiation due to the variation in water content. The same type tissue from different animals, however, is observed to show very similar water absorption.