La1-xNdxSrCoO4催化剂的合成及其催化性能

采用聚丙烯胺溶胶-凝胶法制备了类钙钛矿La1-xNDxSrCoO4(x=0.1～0.9)复合氧化物催化剂,考察了其对CO和C3H8的催化氧化活性,并运用XRD、IR和TPR等手段对催化剂进行了表征.结果表明,所制备的样品均具有K2NiF4型结构,适量Nd2O3的加入增加了LaSrCoO4的催化活性,使LaSrCoO4催化剂粒度变小、晶格畸变率变大及与氧的结合能力减弱,从而有利于CO和C3H8氧化活性的提高.     

PbWO4晶体空位型缺陷电子结构的研究

采用基于密度泛函理论的相对论性离散变分和嵌入团簇方法计算了PbWO4晶体中与氧空位和铅空位相关缺陷的态密度分布,并运用过渡态方法计算了其激发能.结果表明:PbWO4晶体中WO3+VO缺陷的O2p→W5d跃迁可引起350nm和420nm附近的吸收,并且发现VPb的存在可以使WO42基团的禁带宽度明显变小 关键词： PbWO4晶体 密度泛函 氧空位和铅空位 态密度分布     

An ASE Reduction Filter Using Cascaded Optical Fiber Grating Couplers in EDFA Repeater

A new configuration for an ASE reduction filter in EDFA repeaters for WDM optical transmission systems using optical fiber grating couplers (FGCs) was proposed and first demonstrated. The filtering characteristics of the proposed filter for amplified single wavelength signal and 2-channel WDM signals using EDFA were identified. It was found that the filter was effective to improve SNR in optical domain by reducing ASE noise. The required FGC characteristics for the filter were theoretically predicted under the condition that the total filter loss did not exceed 3 dB. More than 70% of drop efficiency was required in each FGC for the application of the proposed filter to an 8-channel WDM system using EDFA repeaters.     

Reaction Intermediates on TiO2(110) Identified by Time-Lapse Scanning Tunneling Microscopy

The present account describes first time examples of scanning tunneling microscope (STM) visualization of reaction intermediates on a metal oxide surface. The topographic response of reactant-adsorbed TiO₂(110) surfaces to a temperature increment or to a pressure increment was monitored as a sequence of STM images. Acetates thermally decomposing to ketene were resolved in a temperature-jump STM observation. The kinetics of the acetate consumption was determined on the number of acetates resolved in the microscope images and agreed with the macroscopic rate law of ketene production. A pressure-jump study revealed how a chemisorbed carboxylate (RCOO^-) is exchanged by another carboxylate (R'COO^-) supplied from the ambient vapor phase. An impinging R'COOH was immobilized on the top of a RCOO^- and then squeezed itself into the monolayer of the RCOO^-. One of the carboxylates in the squeezed state returned to the vapor phase via the immobilized state.     

19F+27Al耗散反应中双核系统的转动与形变

测量了¹⁹F+²⁷Al耗散反应产物B,C,N,O,F和Ne的激发函数,入射束流的能量从110.25MeV到118.75MeV, 能量步长为250keV. 从产物的 能量自关联函数中提取了反应中所形成的中间双核系统的转动惯量, 与相粘模型计算的刚体转动惯量相比较, 结果表明形成的双核系统有大的形变.     

Reductions of interval noncooperative games

Noncooperative games of a finite number of persons with interval-valued payoff functions are considered. The concept of an equilibrium situation is introduced. A reduction of such games to deterministic noncooperative games is proposed. Properties of the reduced games are discussed. Interval antagonistic and bimatrix games are examined, and illustrative examples are considered.     

阴极还原处理对多孔硅发光性能的影响

对经过阴极还原处理后的多孔硅样片进行了光致发光测试和稳定性测试.实验结果表明这种处理能明显改善多孔硅的发光稳定性,使其表面结构更加稳定.利用原子力显微镜对不同还原时间的多孔硅微结构及形貌进行了比较,在一定范围内随着还原时间的增长多孔硅表面粗糙度增大,PL谱增强.     

新型金属杂冠醚配合物18-MC-6[Mn6(4-Amashz)6(DMF)6]·12DMF的合成

合成了一种新型金属杂冠醚配合物[Mn6(4-amashz)6(DMF)6]·12DMF,并用X射线衍射法对其结构进行了表征.研究了该化合物修饰金电极催化氧还原的性质,结果表明,该化合物具有平面碟状结构,对在碱性溶液中的氧有显著的催化还原作用.     

Mechanistic Insights into the Reversible Formation of Iodosylarene–Iron Porphyrin Complexes in the Reactions of Oxoiron(IV) Porphyrin π‐Cation Radicals and Iodoarenes: Equilibrium,Epoxidizing Intermediate,and Oxygen Exchange

We have shown previously that iodosylbenzene–iron(III ) porphyrin intermediates ( 2 ) are generated in the reactions of oxoiron(IV ) porphyrin π‐cation radicals ( 1 ) and iodobenzene (PhI), that 1 and 2 are at equilibrium in the presence of PhI, and that the epoxidation of olefins by 2 affords high yields of epoxide products. In the present work, we report detailed mechanistic studies on the nature of the equilibrium between 1 and 2 in the presence of iodoarenes (ArI), the determination of reactive species responsible for olefin epoxidation when two intermediates (i.e., 1 and 2 ) are present in a reaction solution, and the fast oxygen exchange between 1 and H₂¹⁸O in the presence of ArI. In the first part, we have provided strong evidence that 1 and 2 are indeed at equilibrium and that the equilibrium is controlled by factors such as the electronic nature of iron porphyrins, the electron richness of ArI, and the concentration of ArI. Secondly, we have demonstrated that 1 is the sole active oxidant in olefin epoxidation when 1 and 2 are present concurrently in a reaction solution. Finally, we have shown that the presence of ArI in a reaction solution containing 1 and H₂¹⁸O facilitates the oxygen exchange between the oxo group of 1 and H₂¹⁸O and that the oxygen exchange is markedly influenced by factors such as ArI incubation time, the amounts of ArI and H₂¹⁸O used, and the electronic nature of ArI. The latter results are rationalized by the formation of an undetectable amount of 2 from the reaction of 1 and ArI through equilibrium that leads to a fast oxygen exchange between 2 and H₂¹⁸O.     

Generic Transport Aft-body Drag Reduction using Active Flow Control

Active flow-separation control is an effective and efficient mean for drag reduction and unsteady load alleviation resulting from locally or massively separated flow. Such a situation occurs in configurations where the aerodynamic performance is of secondary importance to functionality. The performance of heavy transport helicopters and aeroplanes, having a large, and almost flat, aft loading ramp suffer from the poor aerodynamics of the aft body. Hence, a combined experimental and numerical investigation was undertaken on a generic transport aeroplane/helicopter configuration. The experimental study provided surface pressures, direct drag measurements, surface and smoke flow visualization. The baseline flow was numerically analyzed, using finite volume solutions of the RANS equations. The baseline flow around the model was insensitive to the Reynolds number in the range it was tested. The flow separating from the aft body was characterized by two main sources of drag and unsteadiness. The first is a separation bubble residing at the lower ramp corner and the second is a pair of vortex systems developing and separating from the sides of the ramp. As the model incidence is decreased, the pair of vortex systems also penetrates deeper towards the centerline of the ramp, decreasing the pressure and increasing the drag. As expected, the ramp lower corner bubble was highly receptive to periodic excitation introduced from four addressable piezo-fluidic actuators situated at the ramp lower corner. Total drag was reduced by 3–11%, depending on the model incidence. There are indications that the flow in the wake of the model is also significantly steadier when the bubble at the lower ramp corner is eliminated. The vortex system is tighter and steadier when the ramp-corner bubble is eliminated.