Thermal analysis in the synthesis and crystal formation of oxides

Vapour phase treatment at elevated temperatures with an activating agent is an effective method of synthesis and purposeful modification of amorphous and fine-grained crystalline substances. In the systems amorphous silica-quartz and amorphous Al(OH)₃ -crystalline-Al₂O₃ different forms of bound water are of prime importance. DTA, TG, DSC, NMR¹H,²⁹Si,²⁷Al, IR spectroscopy, electron- and optical microscopy methods have been used. The interaction of water molecules with the base skeleton and with hydroxide groups on the surface and in the bulk of the silica is of primary significance for modification of the silica structure. The proportion of different forms of the bound water determines the integral evaporation enthalpy of water. Various properties of silica are determined by weak bound water in the surface layer of the material. In the sequence Al(OH)₃ —-Al₂O₃ the structure transformation is observed according to the following scheme:-Al(OH)₃ —-AlOOH- -Al₂O₃, which takes place during the vapour phase treatment with activator.

---

Zusammenfassung Eine Dampfphasenbehandlung bei höheren Temperaturen mit einem Aktivierungsmittel ist eine effektive Methode zur Synthese und zielgerichteten Modifizierung von amorphen und feinkörnigen kristallinen Substanzen. In den Systemen amorphes Siliziumdioxid-Quarz sowie amorphes Al(OH)₃-kristallines-Al₂O₃ hat verschiedenartig gebundenes Wasser eine primäre Bedeutung. Bei den Untersuchungen kamen DTA, TG, DSC,¹H-,²⁹Si-,²⁷Al-NMR, IR-Spektroskopie sowie Elektronen- und optische Mikroskopie zur Anwendung. Die Wechselwirkung von Wassermolekülen mit dem Grundgerüst und mit Hydroxidgruppen an der Oberfläche und im Innern von Silika ist für die Modifizierung der Silikastruktur von primärer Bedeutung. Der Anteil der verschiedenartig gebundenen Wasserformen bestimmt die vollständige Verdampfungsenthalpie des Wassers. Die verschiedenen Eigenschaften von Silika werden durch schwach gebundenes Wasser in der Oberflächenschicht der Substanz bestimmt. Die Umwandlung Al(OH)₃ —-Al₂O₃ durchläuft folgendes Schema:-Al(OH)₃--AlOOH--Al₂O₃, nach dem der Vorgang bei der Gasphasenbehandlung mit Aktivator abläuft.

     

Al Electrode Modified by Au Atoms as a Novel Electrode for Electrocatalytic Oxidation of Thiosulfate

An aluminum electrode modified with gold atoms was introduced as a novel electrode. Gold atoms were deposited both chemically and electrochemically onto the aluminum electrode to make an aluminum/gold (Al/Au) modified electrode (ME). The experimental results showed that the Al/Au modified electrode prepared by chemical deposition, exhibits much more current than the electrochemical deposition method. The electrochemical behavior of the Al/Au modified electrode was studied by cyclic voltammometry. This modified electrode showed two pairs of peaks, a₁c₁ and a₂c₂, with surface‐confined characteristics in a 0.5 M phosphate buffer. The dependence of E_pa of the second peak (a₂c₂) on pH shows a Nernestian behavior with a slope of 55 mV per unit pH. The effect of different supporting electrolytes, solution's pH and different scan rates on electrochemical behavior of Al/Au modified electrode was studied. Au deposited electrochemically on a Pt electrode (Pt/Au) was also used as another modified electrode. A comparative study of electrochemical behavior of bare Al, Pt/Au and Al/Au modified electrodes showed that both Pt/Au and Al/Au electrodes have the ability of electrocatalytic oxidation of S₂O₃^2?, but the electrocatalytic oxidation on the latter was better than the former. The kinetics of the catalytic reaction was investigated by using cyclic voltammetry and chronoamperometry techniques. The average value of the rate constant for the catalytic reaction and the diffusion coefficient were evaluated by means of chronoamperometry technique.     

基于Al6Ge2O13还原制备Ge纳米粒子及其光致发光性能研究

以3-三氯锗丙酸和硝酸铝为原料，通过共沉淀法合成了Al₆Ge₂O₁₃陶瓷粉体，并利用TG-DSC、FTIR、XRD等研究了其形成过程。采用选择还原技术对Al₆Ge₂O₁₃进行还原处理，还原产物观察到发光峰位于564、611、681、730和774 nm的室温光致发光现象。比较不同温度下还原的样品，发现550 ℃保温3 h还原制备的样品发光强度最强，通过XRD、XPS和Raman光谱研究表明样品在可见和近红外光区的发光是源于平均粒径为1.98 nm且未能形成完整晶格的Ge纳米粒子团簇。     

甲醇氨化反应中交联皂石的催化行为

层柱材料是具有规则孔结构且其表面酸性及孔结构可调变的固体酸催化剂.本文合成了皂石,并用十三聚铝羟基络离子(Al_(13))与其交联,在醇氨化反应中研究了此层柱材料孔结构及表面酸性与催化性能间的关系.     

α-Al2O3纳米粒子对Co-Ni合金异常共沉积电化学行为的影响

为了研究在电化学复合共沉积过程中,惰性纳米粒子和金属离子、电极表面的相互作用,以及由此产生的对合金电化学共沉积行为的影响.本文从两个吸附过程出发: 电解液中的金属离子和H＋在纳米粒子表面的吸附；纳米粒子迁移到阴极表面,在电极表面的吸附.采用Zeta电势和稳态极化以及电化学交流阻抗（EIS）研究了纳米Al2O3粒子和电解液中的金属离子，和电极表面的相互作用,进而分析了纳米粒子对Co2＋和Ni2＋还原沉积的影响规律.通过对阻抗数据的拟合,讨论了Al2O3纳米粒子对等效电路中各物理参数的影响.在H＋和不同金属离子在纳米粒子上发生竞争吸附的基础上,提出了纳米粒子和合金共沉积的可能反应历程.     

糠醛脱羰用Pt-K/Al2O3催化剂制备研究--浸渍溶剂的影响

选用丙酮，乙醇、水、乙酸等4种不同溶剂，采用浸渍法制备Pt-K/Al2O3催化剂，电镜分析表明，Pt的分布，分散度与溶剂存在一定关系，且由于助剂K的添加，使Pt浓度的最大值并不在外表面，而在外表面之下；Pt-K/Al2O3的催化性能与Pt的分布，分散度及Pt/K比值有一定关系，当以乙醇为浸渍溶剂时，制备得到的催化剂催化性能最好。     

A new approach for the synthesis of K-free nickel hexacyanoferrate

A Ni, Al hydrotalcite-like compound (Htlc) has been proven an useful host material for an alternative synthesis of a K⁺-free mixed hexacyanoferrate Ni_1.5Fe^III(CN)₆, which is very difficult to obtain in bulk. The first stage of the procedure consists in the intercalation of hexacyanoferrate(III) inside the Htlc structure. The intercalated Htlc has been treated with a NiNO₃ solution. The obtained material has been characterized by XRD, XAS Raman and FT-IR spectroscopy. The voltammetric response of the compound obtained after the complete solubilization of the Htlc host shows a typical fingerprint of nickel hexacyanoferrate material with a very low level of potassium. Elemental analysis confirmed the absence of K⁺ and thus the occurrence of K⁺-free nickel hexacyanoferrate (14% yield).     

Characterization and separation of Al_(13) species using gel-filtration chromatography

Polyaluminum chloride (PAC) coagulant has been developed and widely used in water and wastewater treatment industry since the 1980s[1]. PAC is normally made by partial hydrolysis of acid aluminum chloride solution using slow alkaline titration method. However, this method would result in many different Al species. Among these Al species, it seems that tridecamer (Al13O4(OH) 724 , often denoted by Al13) is the most effective and stable polymeric Al species for water and wastewater treatme…     

Rh—Mo—K／Al2O3催化剂的CO加氢合成低碳醇性能

本文研究了硫化态和还原态Ｒｈ－Ｍｏ－Ｋ／Ａｌ２Ｏ３催化剂上ＣＯ加氢合成低碳醇的反应性能，考察了不同铑负载量、钾助剂、合成气组成和反应条件（温度、压力和空速）对合成醇性能的影响及催化剂的反应稳定性。发现硫化样品较之还原态样品具有更好的合成醇选择性，催化剂中添加铑后，生成醇活性和选择性大幅度提高。选择合适的反应温度、提高反应压力和空速、适当增加合成气Ｈ２／ＣＯ的比例可以获得较好的合成醇反应性能。     

金属载体催化剂的涂层研究

在高温氧化处理不同时间的金属载体箔片上涂覆MgAl2O4/Al2O3过渡涂层,利用TG-DSC,XRD,SEM,BET和超声振动等分析测试技术,对载体和涂层的微观结构与表面特性进行研究.结果表明,在950 ℃下高温氧化5 h,箔片表面生成板状Al2O3晶须,有利于增强涂层与箔片的附着力.在载体表面涂覆一层MgAl2O4/Al2O3过渡涂层,有助于提高活性组分与金属载体的结合力,可以获得高结合强度的涂层结构,促使活性元素高度分散.