Unusual Transport Properties near the Insulator-Metal Transition in Colossal Magnetoresistive Manganites

It is argued that a combination of the Griffiths theory and the double-exchange mechanism predicts the random distribution of ferromagnetic metallic clusters above the Curie temperature TC in colossal magnetoresistive manganites. Along this line, we propose a model for the temperature dependence of resistivity that yields a quantitative agreement with experimental data obtained in a typical manganite La2/3Ca1/3MnO3. Our result indicates that the formation and growth of ferromagnetic metallic clusters are responsible for the observation of unusual transport properties near the insulator-metal transition.     

热丝加热电流对CH薄膜沉积速率和表面形貌的影响

 热丝辅助裂解法是结合气相沉积制备聚对二甲苯薄膜和热丝化学气相沉积而形成的一种制-CH薄膜的新方法。热丝辅助裂解法的最大特点就是在保持低衬底温度情况下可以获得高沉积速率，而热丝加热电流对薄膜沉积速率和薄膜表面形貌具有重要影响。研究表明，热丝加热电流越大，薄膜沉积速率越高，在加热电流9A时，薄膜沉积速率可达0.002mm/min，同时薄膜表面粗糙度随之增加，薄膜表面也开始出现其它元素污染，因此，一般热丝加热电流选择为7A附近。     

沉积铁钝化膜的傅立叶变换表面增强拉曼光谱

利用恒电流沉积技术、傅立叶变换表面增强拉曼散射技术现场研究了0 1mol/LNaOH溶液中铁金属电极在不同电位下的表面氧化物的组成。结果表明,在电极预钝化区,表面首先生成的Fe(OH)2可由拉曼谱图中出现的550cm-1表征,证实了以往的研究结果。进入钝化区,表面二价氧化物逐步转化为高价氧化物Fe3O4及α 、δ 和γ FeOOH。在电位回扫的过程中,各氧化产物的还原以及铁表面SERS活性的逐渐消失导致谱峰强度降低。     

甚高频等离子体增强化学气相沉积法沉积μc-Si∶H薄膜中氧污染的初步研究

对不同的本底真空条件下,采用甚高频等离子体增强化学气相沉积技术沉积的氢化微晶硅（μc_Si∶H）薄膜中的氧污染问题进行了比较研究.对不同氧污染条件下制备的薄膜样品的x射线光电子能谱与傅里叶变换红外吸收光谱测量结果表明：μc_Si∶H薄膜中,氧以Si—O，O—O和O—H三种不同的键合模式存在,不同的键合模式源自不同的物理机理.μc_Si∶H薄膜的Raman光谱、电导率与激活能的测量结果进一步显示：沉积过程中氧污染程度的不同,对μc_Si∶H薄膜的结构特性与电学特性产生显著影响；而不同氧污染对μc_Si∶H薄膜电学特性的影响不同于氢化非晶硅（a_Si:H）薄膜. 关键词： 氢化微晶硅薄膜 甚高频等离子体增强化学气相沉积 氧污染     

Studies on Structure and Porperties of Water Soluble Polysaccharide from Fruiting Body of Cordyceps Militarvs(L.) Link

A water soluble crude polysaccharide has been isolated from the fruiting body of cultivated Cordyceps militarvs(L.)Link.The GC analysis indicated that it contained the monosaccharides of Gal,Man,Glc and GlcA.Their molar ratio is 1.00:1.58:7.89:0.19.The crude polysaccharide was fractionated with ethanol to get three fractions,which were CM-Ⅰand CM-Ⅲ,CM-Ⅱ was further purified to get one homogeneous fraction named CMB.The molecular weight was estimated to be 6000by means of gel filtration.CMB is a greyish white powder.The GC analysis indicated that it was composed of Gal.Man,Glc and the molar ratio is 1.00:1.38:5.10.Partial hydrolysis with an acid.periodate oxidation.Smith degradation.IR,GC and methylation analyses,GC/MS analyses were used for the structure analyses of CMB.Man,(1→6)-linked-Glc,(1→4)-linked-Glc and (1→4)-linked-Gal.Some of (1→4) -linked-Glc and all(1→4)-linked-Gal residues are substituted at 3-O and 6-O respectively,(1→4)-linked-Glc and minor(1→6)-linked-Gle.The nonreduced end is composed of Gal and Glc.The main glycosidic link of CMB is α configuration.     

时间分辨红外发射光谱法对自由基反应的研究

在过去的 15年中 ,傅立叶变换红外发射光谱法广泛应用于研究气相自由基反应 .Sloan首先研究了O(1D)的反应 ,随后Leone和Hancock研究了O(3 P)的反应 .此后 ,孔繁敖和朱起鹤等研究了小自由基 ,包括CH、CH2 、CH3 、C2 H3 、C2 H5、C2 H、C3 H3 和C3 H5与O2 、NO、N2 O、NO2 等分子的反应。在红外光谱中观察到各个反应的初生产物和初步反应通道 ,和从头算的理论研究结合起来 ,这些反应的机理已基本弄清 .     

金属氢研究新进展

简要介绍了金属氢的研究意义和应用前景 ,详细评述了有关的高压实验方法和最近的研究成果及进展 ,特别是固体氢的相图、结构和相变 .近十多年来 ,随着超高压技术的发展 ,已能在金刚石对顶砧 (DAC)上产生30 0GPa的静态压力 ,并可进行高压原位实验研究 .对固体氢进行了高压拉曼、同步辐射X射线、光反射和吸收、同步辐射红外光谱等一系列高压物性和相变研究 .从而确定了固体氢的三个相 ,并提出了可能的相结构 .     

Deposition of Diamond-Like carbon Films by High-Intensity Pulsed Ion Beam Ablation at Various Substrate Temperatures

Diamond-like carbon (DLC) films have been deposited on to Si substrates at substrate temperatures from 255℃ to 400O℃ by a high-intensity pulsed-ion-beam (HIPIB) ablation deposition technique. The formation of DLC is confirmed by Raman spectroscopy. According to an x-ray photoelectron spectroscopy analysis, the concentration of sp^3 carbon in the films is about 40% when the substrate temperature is below 300℃ C. With increasing substratetemperature from 25℃ to 400℃, the concentration of sp^3 carbon decreases from 43% to 8%. In other words,sp3 carbon is graphitized into sp^2 carbon when the substrate temperature is above 300℃. The results of xray diffraction and atomic force microscopy show that, with increasing the substrate temperature, the surface roughness and the friction coefficient increase, and the microhardness and the residual stress of the films decrease.