微波辐射-酶耦合催化(MIECC)反应

将微波辐射用于非水相酶催化可以获得很多有别于常规加热下的反应结果.本文讨论了微波的非热效应在酶促反应中的表现,探讨了微波辐射对酶的结构、构象、活性及酶催化反应动力学的影响,以及微波辐射-酶耦合催化对反应的对映选择性、底物专一性、前手性选择性和区域选择性的影响.在大多数场合,适当的微波辐射不会损伤酶活而且可以提高反应速率,而对酶特异性的影响则不一而论.     

Effects of Calcination Temperature on the Acidity and Catalytic Performances of HZSM-5 Zeolite Catalysts for the Catalytic Cracking of n-Butane

The acidic modulations of a series of HZSM-5 catalysts were successfully made by calcination at different treatment temperatures, i.e. 500, 600, 650, 700 and 800 ℃, respectively. The results indicated that the total acid amounts, their density and the amount of B-type acid of HZSM-5 catalysts rapidly decreased, while the amounts of L-type acid had almost no change and thus the ratio of L/B was obviously enhanced with the increase of calcination temperature (excluding 800 ℃). The catalytic performances of modified HZSM-5 catalysts for the cracking of n-butane were also investigated. The main properties of these catalysts were characterized by means of XRD, N2 adsorption at low temperature, NH3-TPD, FTIR of pyridine adsorption and BET surface area measurements. The results showed that HZSM-5 zeolite pretreated at 800 ℃ had very low catalytic activity for n-butane cracking. In the calcination temperature range of 500-700 ℃, the total selectivity to olefins, propylene and butene were increased with the increase of calcination temperature, while, the selectivity for arene decreased with the calcination temperature.The HZSM-5 zeolite calcined at 700 ℃ produced light olefins with high yield, at the reaction temperature of 650 ℃ the yields of total olefins and ethylene were 52.8% and 29.4%, respectively. Besides, the more important role is that high calcination temperature treatment improved the duration stability of HZSM-5zeolites. The effect of calcination temperature on the physico-chemical properties and catalytic performance of HZSM-5 for cracking of n-butane was explored. It was found that the calcination temperature had large effects on the surface area, crystallinity and acid properties of HZSM-5 catalyst, which further affected the catalytic performance for n-butane cracking.     

NANOMECHANICAL MAPPING OF CARBON BLACK REINFORCED NATURAL RUBBER BY ATOMIC FORCE MICROSCOPY

Atomic force microscopy （AFM） has the advantage of obtaining mechanical properties as well as topographic information at the same time. By analyzing force-distance curves measured over two-dimensional area using Hertzian contact mechanics, Young＇s modulus mapping was obtained with nanometer-scale resolution. Furthermore, the sample deformation by the force exerted was also estimated from the force-distance curve analyses. We could thus reconstruct a real topographic image by incorporating apparent topographic image with deformation image. We applied this method to carbon black reinforced natural rubber to obtain Young＇s modulus distribution image together with reconstructed real topographic image. Then we were able to recognize three regions; rubber matrix, carbon black （or bound rubber） and intermediate regions. Though the existence of these regions had been investigated by pulsed nuclear magnetic resonance, this paper would be the first to report on the quantitative evaluation of the interfacial region in real space.     

Cu掺杂对LaMnO3催化剂的结构和催化氧化性能的影响

采用非晶态多核配合的方法合成了La1-xCuxMnO3(x=0、0.05、0.1、0.2、0.3、0.4、0.5)系列催化剂, 并用X射线衍射(XRD)、透射电镜(TEM)、比表面测定仪(BET)等手段对催化剂的微观结构进行了表征. 研究了Cu掺杂对钙钛矿结构及其对CO催化氧化发光性能及催化氧化CO、CH4性能的影响规律. 结果表明, 当x≤0.1 时, Cu掺杂仍可形成单相的钙钛矿结构; 当x>0.1时, 过量掺杂的Cu以CuO杂相存在. Cu掺杂可改善La1-xCuxMnO3催化剂对CO和CH4的催化氧化活性. 经700 ℃焙烧3 h制备的La0.9Cu0.1MnO3催化剂具有最高CO催化氧化活性(T100%=170 ℃), 该结果与CO催化氧化发光结果一致.而La0.95Cu0.05MnO3催化剂对CH4的催化氧化活性最高(T95%=705 ℃).     

ZrO2-TiO2-CeO2的制备及其在NH3选择性催化还原NO中的应用

采用共沉淀法制备了载体材料TiO2、ZrO2-TiO2及ZrO2-TiO2-CeO2, 并利用X射线衍射(XRD)实验、比表面积测定(BET)、程序升温脱附(NH3-TPD)、储氧性能测定(OSC)及程序升温还原(H2-TPR)等方法对三种载体材料进行了表征. 结果表明, ZrO2-TiO2-CeO2具有较多的表面强酸位, 并具有一定的储氧性能和较强的氧化还原性能. 以三种材料为载体, 制备了质量分数分别为1%、9%的V2O5、WO3的整体式催化剂. 研究了三种催化剂在富氧条件下用NH3选择性催化还原NO的催化性能. 结果表明, 以ZrO2-TiO2-CeO2为载体的催化剂在反应空速为10000 h-1, 275 ℃时, NO的转化率接近100%, 具有最好的催化活性,并有良好的应用前景。     

汽油族组成的近红外光谱快速测定

以荧光指示剂吸附色谱法（FIA）测定汽油族组成结果为基础，采用近红外光谱和化学计量学方法建立了快速、准确测定催化裂化馏出口汽油族组成（饱和烃、烯烃和芳烃）的分析模型；试验表明，该法分析速度快、重复性好、成本低，特别适用于生产中间控制分析。     

吸热型碳氢燃料在银、镧改性ZSM-5分子筛上的裂解研究

为提高吸热型碳氢燃料的吸热能效，对HZSM－5分子筛进行了La^3 、Ag^ 离子交换改性，考察了吸热型碳氢燃料NNJ－150在HZSM－5及改性ZSM－5分子筛催化剂上的裂解情况。结果表明，La^3 、Ag^ 离子交换改性催化剂提高了NNJ－150的裂解气中低碳烯烃的选择性（500℃,81.63%)，并且改性催化剂和未改性催化剂的活性在35min内均未随进样时间下降，转化率也未降低（500℃,HZSM-5,64.62%;LaZSM-5,65.71%；AgZSM-5,68.75%)。实验结果表明，双金属离子改性可为今后研究的方向。     

开放式声化学反应体系中的反应动力学

采用气液传质的双膜理论建立了开放体系中声化学反应的动力学模型，同时用声源频率为500 kHz，声强为3 W·cm^-2的超声波在开放式声化学反应器内引发被空气饱和溶解的KI纯水溶液中的声化学反应，并检测反应过程中溶液的电导率，pH值改变及KI溶液中I₂的析出量，结果表明，它们与超声辐照时间之间呈线性关系，与理论模型吻合。     

纳米固体超强酸SO42-/Fe2O3的制备及其催化合成乙酸乙酯

将Fe₂O₃纳米粉体经一定浓度的H₂SO₄浸泡活化后制成纳米固体超强酸SO₄^2-/Fe₂O₃,将其用于催化合成乙酸乙酯以考察其活性。利用均匀设计分析了超强酸制备过程及酯化反应过程中各因素的影响,研究结果表明较好的制备条件是:H₂SO₄浓度:2.5mol·L^-1;浸泡时间:1h;活化温度:167℃;活化时间:1h,此时获得的固体超强酸SO₄^2-/Fe₂O₃的粒径小于50nm。当催化剂用量为冰乙酸质量的5%,n(乙醇)∶n(冰乙酸)为3∶1,反应3.5h后乙酸的转化率高于80%。该催化剂经H₂SO₄溶液浸泡、活化再生后可重新使用,推断出其酸强度H₀<-14.5。     

含离子液体［bmim］Cl的反应介质中马肝醇脱氢酶的催化特性

 研究了马肝醇脱氢酶(HLADH)在含离子液体1-丁基-3-甲基咪唑氯酸盐(［bmim］Cl)的反应介质中的催化特性. 以乙醇为底物时,该酶在［bmim］Cl含量≤0.15 g/ml的体系中的活力高于在不含离子液体的体系中的活力; 离子液体浓度过高(＞0.15 g/ml)对酶活性有明显的抑制作用. 反应温度和pH对含离子液体的反应介质中酶活力的影响规律与不含离子液体时的规律相似. 与不含离子液体的反应介质相比, HLADH在含0.05 g/ml ［bmim］Cl的体系中催化乙醇氧化的活化能下降,酶反应的Vmax和Km均升高. 反应体系中低浓度(≤0.1 g/ml)的离子液体能提高酶的热稳定性,但高浓度(＞0.1 g/ml)的离子液体可降低酶的热稳定性. 紫外二阶导数光谱显示,在含不同浓度离子液体的反应介质中酶分子构象的变化有较大的差异.