非晶硅薄膜的低温快速晶化及其结构分析

在镀铝的廉价玻璃衬底上高速沉积的非晶硅薄膜在不同的温度下退火10min.退火温度为500℃时,薄膜表面形成了硅铝的混合相,非晶硅薄膜开始呈现了晶化现象 退火温度为550℃时,大部分(约80%)的非晶硅晶化为多晶硅,平均晶粒尺寸为500nm 退火温度为600℃时,几乎所有的非晶硅都转化为多晶硅,其平均晶粒尺寸约为15μm.     

阵列幅相误差条件下的目标方位估计

本文研究了一种改进的MUSIC法，可在一定阵列幅相误差条件下对多目标实现高分辨方位估计，有效地改善了原算法的参数估计性能，具有稳健性高、适用范围广以及工程实现简单等特点，通过大量的计算机仿真和水池实验表明，该方法具有较好的多目标分辨能力和方位估计精度，工程应用前景良好。     

微极各向同性弹性板中的Rayleigh-Lamb波

研究了无应力作用条件下，均匀、各向同性、圆柱形微极结构弹性板中波的传播．导出了对称和斜对称模式下波传播的特征方程．对短波这一极端情况，无应力圆板中对称和斜对称模态波的特征方程退化为Pmyle曲表面波频率方程．并得到薄板的计算结果．给出了位移和微转动分量，并绘制了相应图形．给出了若干特殊情况的研究结果及对称和斜对称模态特征方程的图示．     

Entangled States Based on Two Coherent States 3π/2 out of Phase

Entangled states based on two coherent states 3π/2 out of phase with each other, i.e. ｜α〉 and e^iФ｜-iα〉, as well as on a special state with a relative phase Ф = ｜α｜^2, are constructed. By analysing the amount of entanglement it is evident that entangled states based on this special state can be used as an excellent resource for quantum teleportation. It is also revealed that these entangled states possess some nonclassical features.     

Scheme for Robust Long-Distance Continuous Variable Quantum Key Distribution

It is shown that the configuration of phase coding for quantum key distribution with single photon can also be used for continuous variable quantum key distribution. Therefore the robust long-distance high-speed quantum key distribution can be achieved with current technology.     

氧碘化学激光气固相化学反应体系热力学分析

氧碘化学激光器（COIL）的发展已经到了提高系统安全性和工作环境适应性、降低系统复杂性阶段，而改进O2（^1△g）的产生方式和方法正是这个阶段的重要工作内容之一。近期，美国空军研究实验室运用气-固相反应方式产生O2（^1△g）。采用碱金属过氧化物或碱土金属过氧化物与卤化氢反应，生成O2（^1△g）。通常气一固相反应有着反应速度慢，接触面积小，反应产物难以脱出固体表面的缺陷，使得产出率低，而不被广泛采用。但随着表面化学研究的突飞猛进，借助表面活化分子，特殊性质的表面构造，大表面的构造，都为气一固相反应的进行提供了可行途径。如果此方法能用在氧碘激光器上，将克服传统方法的诸多不足。     

热处理条件对双粉工艺中Bi—2212粉末的相组成影响

实验研究了Bi-2212粉末在空气，8％O2和纯O2种处理的相组成特征，指出通过改变热处理温度和气氛可控制前驱粉中对2223成相影响较大的(Bi，Pb)-2212相，Ca2PbO4相，2201相和14：24AEC等相。     

低进汽压力下超音速两相流升压特性实验研究

本文采用实验方法研究了进汽压力为0.2 MPa以下时,由蒸汽喷嘴、混合腔及相应的阀门和管道组成超音速汽液两相流升压加热装置的运行特性。实验表明在进汽压力为0.1 MPa-0.2 MPa时,超音速汽液两相流升压加热装置都可稳定可靠地运行,且升压效果明显,可满足电力、供暖、轻工等许多行业蒸汽加热的要求。     

Self-assembly behaviour of amphiphilic diblock copolymer in selective solvents studied by synchrotron small-angle x-ray scattering

The aggregation behaviour of styrene-vinyl benzoic acid (PSm-b-PVBAn) amphiphilic diblock copolymers in selective solvents with different m and n was investigated by synchrotron small-angle x-ray scattering (SAXS). We have carried out a detailed analysis of scattering intensity, dimension, shape and microstructure of the diblock copolymers of narrow distribution in water, methanol, ethanol and isopropanol selective solvents, respectively. We have found that the aggregation behaviour of the copolymer depends on the nature of the solvent and the micelle forms fiat disc objects with the ratio of radius ω=0.4. The average radius gyration Rg of the copolymer decreases as solvents change from isopropanol to ethanol and to methanol, and increases with increasing pH in aqueous solution, but decreases with the addition of COCl2 in ethanol solvent. The scattering intensity of diblock copolymer micelle follows I(h) ∝ h^-α in different selective solutions, suggesting that the PSm-b-PVBAn coils have self-similar structure behaviour or a fractal structure in the selective solvents. All of these revealed that the aggregation behaviour of the diblock copolymer changes dramatically with experimental condition in the selective solvent. The increase of mass fractal dimension (Dm) from 2.12 to 2.47 indicates that the copolymer chain changes from a swollen coil to a rather compact disc in the course of changing solvents, decreasing surface fractal dimension (Ds) from 2.98 to 2.58 indicates that the copolymer micelle change from a rather rough surface to a smooth form in the course of increasing pH in aqueous solutions, and increasing Dm and Ds from 2.29 to 2.35 and 2.70 to 2.90, respectively, indicates the shrinkage of copolymer micelle to a rather compact and rough disc form by adding COCl2 in ethanol solvents.