高斯光束计算平板波导自由传输区远场分布及其修正

对近轴近似条件下求解亥姆霍兹方程得到的高斯光束显式传播公式做了分析，同时，基于基尔霍夫衍射理论，在菲涅耳近似的条件下给出了相应的高斯光束在远场的传播公式，在此基础上，对近轴近似条件做出了定量分析，给出了这个近似条件引入的误差，提出了一种计算高斯光束远场分布的修正方法，并采用有限差分-光束传播方法(FD-BPM)来检验各种方法的准确性。把这种修正方法应用到平面光集成波导器件，如阵列波导光栅(AWG)、蚀刻衍射光栅(EDG)等器件的设计和模拟中，可以大大降低工作的复杂性，同时可以得到精确的结果。     

Field Emission from Silicon Nanocrystallite Films with Compact Alignment and Uniform Orientation

Patterned silicon nanocrystallite (SINC) films were fabricated on (100) orientation p-type boron-doped sificon wafer by the hydrogen ion implantation technique and the anodic etching method. The efficient field emission with low turn-on field of about 3.5V/μm at current density of 0.1μA/cm^2 was obtained. The emission current density from the SiNC films reached 1mA/cm^2 under a bias field of about 9.1V/μm. The experimental results demonstrate that there are great potential applications of the SiNC films for fiat panel displays. A surface treatment with hydrogen plasma was performed on the SiNC films and a significant improvement of emission properties was achieved.     

β-环糊精键合蚀刻开管毛细管电色谱柱的制备与评价

研究环糊精键合蚀刻毛细管柱的制备方法，考察了电渗流性质及其电色谱性能；其电渗流大小和方向都可调控；有效分离了碱性蛋白和硝基苯酚位置异构体；对安息香和氨基酸衍生物对映异构体能部分分离。     

安培检测芯片毛细管电泳及其初步应用

An end-channel amperometric detector with a guide tube for working electrode was designed and integrated on a home-made glass microchip. The guide tube was directly patterned and fabricated at the end of the detection reservoir, which made the fixation and alignment of working electrode relatively easy. The fabrication was carried out in a two-step etching process. A 30 μm carbon fiber microdisk electrode and Pt cathode were also integrated onto the amperometric detector. The baseline separation of dopamine (DA), catechol (CA) and epinephrine (EP) was achieved within 80 s. Relative standard deviations of not more than 5.2% were obtained for both peak currents and migration times of DA and CA (n=5). Using standard adding method, DA in tLrine and plasma samples was detected. The recoveries were in the range of 83%—103%.     

三元复合驱低浓度体系相行为及中间混合层结构分析

低浓度的表面活性剂ASP(碱/表面活性剂/聚合物)驱油体系溶液与模拟原油混合,研究该体系的相行为和界面张力的变化情况,并应用粒度分析仪和冷冻蚀刻透射电子显微镜技术,对中间混合层的粒径分布及其结构进行研究.发现中间混合层的体积随各组分的浓度变化而有一定的规律性,中间混合层与油相和水相之间的界面张力均能达到超低.特别是得到了冷冻蚀刻电子显微镜照片, 并提出中间混合层为胶束、微乳液、乳状液等表面活性剂聚集体的共存体系,其中微乳液结构占主要地位.这对丰富表面活性剂的理论研究及探讨三元复合驱的驱油机理必将起到重要作用.     

大学无机化学实验中碱式碳酸铜制备方法探讨

探讨大学无机化学实验中有关碱式碳酸铜制备的实验方法,并以Cu(NO3)2为原料、NaOH和Na2CO3的混合液为沉淀剂制备碱式碳酸铜。讨论反应物最佳配比、pH、温度等因素对产品的影响,并对所制产品进行XRD分析,提出一种制备碱式碳酸铜的大学无机化学实验方法。     

模板法组装纳米有序阵列的研究进展

由金属、半导体、碳纳米管、聚苯胺等组成的纳米有序阵列体系,在能量存储或转换、传感等方面具有广阔的应用前景。模板法组装纳米有序阵列体系是以具有特定微孔结构的材料为模板,通过电化学沉积、溶胶-凝胶沉积和化学气相沉积等手段,让纳米单元在模板提供的受控环境中原位生成,形成纳米有序阵列体系。模板法具有可控性好、工艺简便、能耗低等优点。本文综述了模板法组装纳米有序阵列体系的研究进展,并对纳米有序阵列体系的应用前景作了展望。