SAPO-11分子筛晶化过程研究

采用X射线衍射、X射线荧光光谱、扫描电镜和固体核磁等方法研究了SAPO-11分子筛的水热晶化过程.结果表明,晶化初期,SAPO-11和一种具有磷硅铝组成的未知晶相同时生成;随着晶化的进行,中间相溶解,SAPO-11的生成速率大大增加,呈现快速晶化的特征;至2.33h后,SAPO-11的结晶度接近100%,并保持至晶化结束.硅从晶化初期即参与了SAPO-11的形成,它在晶体中的含量随晶化时间的延长而逐渐增加.硅原子主要以硅岛的形式分布于SAPO-11分子筛骨架中,从而导致多种硅配位环境的存在.分析显示,SAPO-11分子筛呈现外表面富硅的特点,结合晶化过程的分析可推测,硅在SAPO-11分子筛晶体中的分布不均匀,其含量从内向外递增.     

Vibrational spectra of a ferrocenyl phosphine derivative chemisorbed on 3-aminopropylsilyl modified silica gel

Samples of silica gel dried at different temperatures, silica gel modified with 3-aminopropylsilyl (APS) and silica gel modified with APS and further with a ferrocenyl phosphine derivative were investigated by DRIFT, transmission FTIR and MicroRaman spectroscopy. The reaction between 3-aminopropyltrimethoxysilane (APTMS) and silica gel was mainly identified by the diminishing or vanishing intensity of the stretching band of the free OH groups in the silica gel. Further chemical reaction of the APS groups with a ferrocenyl phosphine derivative (suitable as ligand in homogeneous catalysis) was identified in the IR spectra by the appearance of the CN stretching band of the formed Schiff base, and diminishing intensity of the δ(NH₂) modes. According to the IR spectra the reaction of the ferrocenyl phosphine derivative with the APS-modified silica gel is almost quantitative. From the recorded IR and Raman spectra, conclusions concerning the substitution of APTMS methoxy groups during the chemisorption on silica gel were derived. Through deconvolution of the complex Raman band in the siloxy stretching region of the APS-modified silica gel, the newly formed siloxy bond was identified.     

Nitrogen‐Doped Carbon Dots: A Facile and General Preparation Method,Photoluminescence Investigation,and Imaging Applications

Carbon dots (Cdots) are an important probe for imaging and sensing applications because of their fluorescence property, good biocompatibility, and low toxicity. However, complex procedures and strong acid treatment are often required and Cdots suffer from low photoluminescence (PL) emission. Herein, a facile and general strategy using carbonization of precursors and then extraction with solvents is proposed for the preparation of nitrogen‐doped Cdots (N‐Cdots) with 3‐(3,4‐dihydroxyphenyl)‐L ‐alanine (L ‐DOPA), L ‐histidine, and L ‐arginine as precursor models. After they are heated, the precursors become carbonized. Nitrogen‐doped Cdots are subsequently extracted into N,N′‐dimethylformamide (DMF) from the carbogenic solid. A core–shell structure of Cdots with a carbon core and the oxygen‐containing shell was observed. Nitrogen has different forms in N‐Cdots and oxidized N‐Cdots. The doped nitrogen and low oxidation level in N‐Cdots improve their emission significantly. The N‐Cdots show an emission with a nitrogen‐content‐dependent intensity and Cdot‐size‐dependent emission‐peak wavelength. Imaging of HeLa cells, a human cervical cancer cell line, and HepG2 cells, a human hepatocellular liver carcinoma line, was observed with high resolution using N‐Cdots as a probe and validates their use in imaging applications and their multicolor property in the living cell system.     

新型咪唑[2,1-b][1,3,4]噻二唑衍生物的合成及Cdc25B抑制活性

大量研究表明,细胞分裂周期25磷酸酯酶B(Cdc25B)在许多癌症中都是过度表达的,如乳腺癌、结肠癌、子宫颈癌、肺癌等.因此,抑制Cdc25B是治疗癌症的一种潜在方法.采用微波辐射法,合成出了20个新的2,6-二芳基-咪唑[2,1-b][1,3,4]噻二唑衍生物4,然后再经Vilsmeier-Haack反应,合成出了19个新的2,6-二芳基-咪唑[2,1-b][1,3,4]噻二唑-5-甲醛(5).利用IR,1H NMR和元素分析对新的中间体化合物3及目标产物4和5进行了结构表征.对所合成的目标化合物4和5进行了Cdc25B抑制活性筛选.实验结果表明,在浓度为5μg/mL时,目标化合物4c对Cdc25B的抑制活性最高,抑制率为87.68%,目标化合物4o和5m具有中等的抑制活性,其抑制率分别为55.76%和57.69%.它们是潜在的Cdc25B抑制剂.     

Highly efficient N-glycoproteomic sample preparation by combining C18 and graphitized carbon adsorbents

Conventional N-glycoproteome analysis usually applies C₁₈ reversed-phase (RP) adsorbent for sample purification, which will lead to unavoidable sample loss due to the high hydrophilicity of N-glycopeptides. In this study, a porous graphitized carbon (PGC) absorbent was combined with a C₁₈ adsorbent for N-glycopeptide purification in comprehensive N-glycoproteome analysis based on the hydrophobic and polar interactions between carbon and N-glycans. It was observed that the small hydrophilic N-glycopeptides that cannot retain onto C₁₈ adsorbent can be captured by the graphitized carbon, while the large hydrophobic N-glycopeptides that cannot retain onto the graphitized carbon can be feasibly captured by the C₁₈ adsorbent. Comparing with sample purification by using C₁₈ adsorbent only, 28.5 % more N-glycopeptides were identified by combining both C₁₈ and PGC adsorbents. The C₁₈-PGC strategy was further applied for both sample purification and pre-fractionation of a complex protein sample from HeLa cell. After hydrophilic interaction chromatography enrichment, 1,484 unique N-glycopeptides with 1,759 unique N-glycosylation sites were finally identified.

Clickable SBA‐15 to Screen Functional Groups for Adsorption of Antibiotics

Pharmaceutical antibiotics, as emerging contaminants, are usually composed of several functional groups that endow them with the ability to interact with adsorbents through different interactions. This makes the preparation of adsorbents tedious and time‐consuming to screen appropriate functionalized materials. Herein, we describe the synthesis of clickable SBA‐15 and demonstrate its feasibility as a screening material for the adsorption of antibiotics based on similar adsorption trends on materials with similar functional groups obtained by a click reaction and cocondensation/grafting methods.     

Poly(amide-6-b-ethylene oxide)/SAPO-34 mixed matrix membrane for CO2 separation

In this paper, poly(amide-6-b-ethylene oxide) (Pebax1657)/SAPO-34 mixed matrix membranes (MMMs) were prepared by solvent-evaporation method with acetic acid as a novel solvent. CO₂, N₂, CH₄ and H₂ permeation properties were investigated, and the physical properties of Pebax/SAPO-34 MMMs were characterized by XRD and SEM. At low SAPO-34 content, it was homogeneously distributed in the Pebax matrix, and then precipitated and agglomerated at high SAPO-34 content. The crystallinity of Pebax phase in Pebax/SAPO-34 MMMs decreased initially and then rebounded as a result of phase separation. With the increase of transmembrane pressure difference, CO₂ permeability was enhanced due to the effect of pressure-induced plasticization. Owing to the happening of stratification, the CO₂ permeability of Pebax/SAPO-34 MMMs (50 wt% SAPO-34) increased to 338 Barrer from 111 Barrer of pristine Pebax, while the selectivities of CO₂/CH₄ and CO₂/N₂ were almost unchanged. Compared with the pristine Pebax, the gas separation performances of Pebax/SAPO-34 MMMs were remarkably enhanced.     

热稳定单原子催化剂的理性构筑:从原子级结构到实际应用

80%以上的工业生产过程涉及催化,如化工生产、能源转换、制药和废物处理等等.催化剂的使用显著提高了生产效率,降低了生产成本,为国民经济、地球环境和人类文明的可持续发展做出了很大贡献.为了满足日益增长的生产需求和最大的经济效益,开发高效、稳定、低成本的新型催化剂已成为当务之急.金属中心负载在载体上的负载型金属催化剂因其较好的催化活性和相对较低的金属用量而受到广泛关注.研究发现,负载型结构可增强传热和传质并增加活性金属中心的分散度,从而影响催化性能.此外,负载金属的颗粒尺寸对催化剂的性能有很大影响.迄今为止,科学家们一直在通过减小金属颗粒尺寸和提高原子利用效率来提高催化剂的活性.原子级尺寸的颗粒通常表现出与大尺寸颗粒显着不同的物理和化学性质,而当活性位点的尺寸缩小到单个原子时,单原子催化剂的概念应运而生.对于单原子催化剂,金属原子中心通过配位被载体中的缺陷锚定,从而调整金属原子的电子云分布.这种配位调整使得单原子催化剂拥有与传统催化剂不同的性能.作为催化领域的新前沿,单原子催化剂已经在许多催化反应中表现出前所未有的活性和选择性.然而,许多报道的单原子催化剂在高温环境或长期催化应用中容易受到奥斯特瓦尔德熟化过程的影响,从而导致催化剂烧结和失活.而烧结的原因在于金属原子和载体之间较弱的相互作用.失活催化剂的再生和回收将大大增加工业生产的时间和经济成本.因此,开发具有优异热稳定性的单原子催化剂以满足工业需求是十分必要的.本综述首先总结了近年来关于热稳定型单原子催化剂合成方法的基础研究,并从原子尺度上分析了这些方法所构建的金属中心的结构形态和配位环境.此外,结合近些年的研究中新的表征技术与理论计算手段解释了热稳定性的来源.重点讨论了热稳定单原子催化剂的实际催化应用.分析了热稳定单原子催化剂在热催化应用中的独特作用机理、并尝试为确定催化过程中真正的活性中心以及通过原子级调控手段进行高活性热稳定单原子催化剂的合成提供理论指导.最后总结了热稳定单原子催化剂发展的主要问题,并简要分析了单原子催化领域的研究挑战和发展前景.     

Co3O4/UiO-66@α-Al2O3陶瓷膜对VOCs废气的分离催化性能

以α-Al₂O₃为支撑层, UiO-66为分离层, Co₃O₄为催化层, 构建了Co₃O₄/UiO-66@α-Al₂O₃陶瓷膜.对其形貌结构进行了表征, 并研究了其对挥发性有机物(VOCs)的分离催化性能. 结果表明, 该陶瓷膜对喷涂行业废气中苯与吡啶两种主要成分体现出良好的分离性, 透过侧的气体中吡啶与苯的摩尔浓度比值可由给料侧的1提高至17; 体系中引入臭氧后, 给料侧苯的浓度明显降低, 其去除率可达到89%. 透过侧的吡啶去除率仅为27%, 得到了较大程度的保留, 剩余的吡啶经收集后可进行单独的深度处理. Co₃O₄/UiO-66@α-Al₂O₃陶瓷膜在对喷涂行业废气中苯成分高效降解的同时, 能够有效解决喷涂行业废气处理过程中氮氧化物的排放问题, 有望成为喷涂行业废气预处理工艺的理想选择.     

Aprotic Amine-modified Manganese Dioxide Catalysts for Selectivity-tunable Oxidation of Amines

Organic modifiers have shown promising potential for regulating the activity and selectivity of heterogeneous catalysts via tuning their surface properties. Despite the increasing application of organic modification technique in regulating the redox-acid catalysis of metal oxides, control of the acidity of metal oxide catalysts for enhanced reaction selectivity without sacrificing their redox activity remains a substantial challenge. Herein, we show the successful control of redox-acid catalysis of metal oxides with aprotic tertiary amine modifiers. Robust modification of manganese dioxide catalysts with N,N-dialkylcyclohexylamine selectively blocks the Lewis acid sites, with their redox activity mostly unaffected. This enables efficient synthesis of imines in high to excellent selectivity via aerobic oxidation of structurally diverse aryl amines.