高效液相色谱-串联质谱法检测食品中6种邻苯二甲酸酯

建立了食品中邻苯二甲酸二丁酯(DBP)、邻苯二甲酸丁基苄基酯(BBP)、邻苯二甲酸二已酯(DEHP)、邻苯二甲酸二正苄酯(DNOP)、邻苯二甲酸二异壬酯(DINP)、邻苯二甲酸二异癸酯(DIDP)6种邻苯二甲酸酯的高效液相色谱-串联质谱检测方法。试样用正己烷∶甲基叔丁基醚∶乙腈(体积比为50∶45∶5)提取并冷冻离心去除脂肪,收集溶剂层并挥干,加入0.5g乙二胺-N-丙基硅烷(PSA)并用2mL乙腈溶液混匀,冷冻离心后过膜备用。优化分离与检测的最佳条件,采用电喷雾正离子电离(ESI+)模式和多离子反应监控(MRM)模式,外标法进行定量。该方法中DBP、BBP、DEHP、DNOP在0.1～3.0mg/L之间,DINP和DIDP在1.0～30.0mg/L之间的线性相关系数R2>0.995;检测限分别为:DBP 0.02mg/L,BBP、DEHP和DNOP 0.005mg/L,DINP和DIDP 0.10mg/L。在添加水平为0.2、0.5、1.0mg/kg时的平均加标回收率和相对标准偏差范围符合食品检测要求。该方法简便、灵敏、精确,适用于检测食品中6种邻苯二甲酸酯残留。     

Helical Biphenyl Bisazo Polyurethane: Preparation,Characterization and Analysis of Polymeric Thermo-Optic Switch

The bisazo chromophore molecule (CAAPM) and helical biphenyl bisazo polyurethane (HBBPU) were synthesized. The structures of CAAPM and HBBPU were characterized by FT-IR and UV-vis spectroscopic techniques. The measurements of refractive index and thermo-optic coefficient (dn/dT) of HBBPU were demonstrated at different wavelengths and different temperatures by the ATR technique. By using CCD digital imaging devices, transmission loss of the internal waveguide was measured. The refractive index dispersions and Sellmeyer coefficients of HBBPU were obtained by the Sellmeyer equation. A Y-branched switch based on the thermo-optic effect was proposed and the performance of the switch was simulated. With a branching angle of 0.143° and the FD-BPM method, the result showed that the power consumption of the thermo-optic switch could be only 3.6 mW, and the response time of the switch could reach about 8 ms. This is a significant improvement in reducing power consumption compared with the normal Y-branched polymer thermo-optic switch.     

Electrogenerated Fe(I) Porphyrins: Efficient Electrocatalysts for Reductive Dechlorination of DDT in N,N′‐Dimethylformamide

Two iron(I) porphyrins were electrogenerated and then utilized as catalysts for the reductive dechlorination of 1,1‐bis(4‐chlorophenyl)‐2,2,2‐trichloroethane (DDT) in N,N′‐dimethylformamide. No reaction is observed between DDT and the Fe(III) or Fe(II) forms of the porphyrin, but the electrogenerated Fe(I) porphyrin efficiently catalyzes the electroreduction of DDT to give (1,1‐bis(4‐chlorophenyl)‐2,2‐dichloroethane) DDD, (1,1‐bis(4‐chlorophenyl)‐2,2‐dichloroethylene) DDE and (1,1‐bis(4‐chlorophenyl)‐2‐dichloroethane) DDMU as determined by GC‐MS analysis. The reductive dechlorination was monitored by electrochemistry, controlled potential electrolysis and spectroelectrochemistry and a mechanism for the reaction involving the reduced porphyrins and DDT is proposed. Comparisons are also made between the catalytic properties of metalloporphyrins containing iron, cobalt and manganese central metal ions under the same solution conditions.     

Selective separation of lambdacyhalothrin by porous/magnetic molecularly imprinted polymers prepared by Pickering emulsion polymerization

Porous/magnetic molecularly imprinted polymers (PM‐MIPs) were prepared by Pickering emulsion polymerization. The reaction was carried out in an oil/water emulsion using magnetic halloysite nanotubes as the stabilizer instead of a toxic surfactant. In the oil phase, the imprinting process was conducted by radical polymerization of functional and cross‐linked monomers, and porogen chloroform generated steam under the high reaction temperature, which resulted in some pores decorated with easily accessible molecular binding sites within the as‐made PM‐MIPs. The characterization demonstrated that the PM‐MIPs were porous and magnetic inorganic–polymer composite microparticles with magnetic sensitivity (M_s = 0.7448 emu/g), thermal stability (below 473 K) and magnetic stability (over the pH range of 2.0–8.0). The PM‐MIPs were used as a sorbent for the selective binding of lambdacyhalothrin (LC) and rapidly separated under an external magnetic field. The Freundlich isotherm model gave a good fit to the experimental data. The adsorption kinetics of the PM‐MIPs was well described by pseudo‐second‐order kinetics, indicating that the chemical process could be the rate‐limiting step in the adsorption of LC. The selective recognition experiments exhibited the outstanding selective adsorption effect of the PM‐MIPs for target LC. Moreover, the PM‐MIPs regeneration without significant loss in adsorption capacity was demonstrated by at least four repeated cycles.     

Synthesis of Derivatives of Chlorin P6 Trimethyl Ester

The Vilsmeier reaction of nickel(II) chlorin P₆ trimethyl ester with 3-dimethyl-aminoacrolein yielded nickel(II) chlorin P₆ 20-(2-formylvinyl) trimethyl ester and nickel(II) chlorin P₆ 3-(1-hydroxyethyl)-3-devinyl-20-(2-formylvinyl) trimethyl ester. Also, the outgrowths of nickel(II) chlorin P₆ 20-(2-formyl) trimethyl ester and nickel(II) chlorin P₆ 3-(2-formylvinyl)-3-devinyl-20-(2-formyl) trimethyl ester were obtained by Vilsmeier reaction with dimethylformamide. By treating the derivatives of nickel(II) 20-(2-formyl)-chlorin and nickel(II) 3-(2-formylvinyl)-20-(2-formyl)-chlorin with trifluoracetic acid, the removal of the central nickel(II) ion was accomplished. The derivatives of 20-(2-formyl)-chlorin and 3-(2-formylvinyl)-20-(2-formyl)-chlorin demonstrated considerable bathochromic shift of the major absorption band in the red region of the optical spectrum.     

Trigoxyphins O–T,six new heterodimers from Trigonostemon xyphophylloides

Phytochemical study of the twigs of Trigonostemon xyphophylloides led to the isolation of six new heterodimers, trigoxyphins O (1) and R–T (4–6) comprising of two different degraded diterpenoids, and trigoxyphins P (2) and Q (3) comprising a degraded diterpenoid and a phenylpropanoid, together with a known homodimer, neoboutomannin (7). The structures and relative configurations were elucidated on the basis of extensive spectroscopic analysis, including 1D and 2D NMR experiments. Compounds 1–6 were evaluated for their cytotoxicity against four human tumour cell lines by MTT assay.     

适配子识别技术在真菌毒素快速分析中的应用

适配子是近几年来通过指数富集配基的系统进化技术(SELEX)体外筛选得到的一类与目标分子高特异性结合的寡聚核苷酸片段.适配子作为一个优于抗体的新型识别分子,已在食品快速检验、环境检测、新药研发、临床诊断和治疗以及毒理研究等领域展示了良好的应用前景.本文阐述了适配子识别靶物质的结构基础及其特性,归纳了目前已筛选出的真菌毒素适配子序列,总结了适配子在真菌毒素前处理,适配子光学分析技术和电化学分析技术在单种和多种真菌毒素检测中的应用突破,并展望了适配子识别技术在真菌毒素分析领域的发展趋势.     

CdS/石墨烯纳米复合物的可见光催化效率和抗光腐蚀行为

制备了一系列CdS纳米晶/石墨烯(CdS/GR)复合物,并在可见光照条件下评价了其光催化降解亚甲基蓝的光催化效率和抗光腐蚀行为. 研究表明,石墨烯的引入加速了CdS纳米晶(NCs)光生电子的迁移速率,抑制了其光生电子-空穴的复合,有效改善了其光催化降解有机污染物的性能. CdS/GR复合物中的石墨烯含量显著影响其光催化效率,其中石墨烯含量为4.6%的光催化剂效率最高,其光电流是CdS NCs的2.3倍. 利用光电化学和X射线衍射技术进一步证实,石墨烯的引入抑制了CdS NCs光腐蚀的发生,提高了CdS/GR复合物的光催化稳定性.     

Effect of chemical composition and heat treatment condition on microstructure and magnetic properties of nanocrystalline BaDyxFe12−xO19 (x = 0.1, 0.2, 0.3, 0.4) microfibres

A series of BaDy_xFe_12?xO₁₉ ferrite microfibres have been synthesized from metal nitrates and citric acid by the sol–gel method. TG-DSC, XRD, FTIR, FESEM, TEM and VSM were employed to characterize the thermal decomposition process, crystallite sizes, structure and magnetic properties of ferrite microfibres. The effect of calcined temperature, holding time, ion substitution on structure, magnetic properties of barium ferrite microfibres was investigated. The nanoparticle growth mechanism of ferrite microfibres was discussed. The results indicated that the hexaferrite phase was formed at 750 °C and Dy³⁺ ions entered the magnetoplumbite lattice. However, the reflections shift to a lower angle and the characteristic peaks of ferrite microfibres in FTIR shift to the lower wavenumber with the Dy content increasing. The VSM results shown that saturation magnetization (M _s ) gradually increased with calcined temperature increasing and holding time prolonging, while coercive force (H _c ) revealed an increase at first and then decreases. With the Dy content increasing, the M _s achieved values of M _s  = 50 emu?g^?1 (297 K) and 70 emu?g^?1 (77 K) and the H _c value shown a continuous reduction from 515 kA??m^?1 (297 K) and 435 kA?m^?1 (77 K) (x = 0.0) to 242 and 215 kA?m^?1 (x = 0.4).     

BiFeO3空间选择性光化学还原Ag及光催化活性

采用溶胶-凝胶法和光还原沉积法制备出Ag改性的纳米BiFeO₃粒子,对复合材料进行了FESEM、XRD、XPS、FTIR、UV-Vis/DRS等分析和表征。考察了波长365nm以上的光照下,铁磁性材料的空间选择性光化学反应对复合材料的结构、形貌以及光谱性质的影响。以罗丹明B为模拟污染物,考察了纳米Ag-BiFeO₃粒子的可见光光催化活性以及稳定性。结果表明：通过光化学沉积,不仅增强了BiFeO₃在200~800nm光照下的响应,而且抑制了光腐蚀现象,提高了BiFeO₃的稳定性。在波长大于400nm的光照射12h后单纯纳米BiFeO₃粒子对罗丹明B脱色率约为74%,而Ag-BiFeO₃复合材料6h后约为90%,并且重复使用3次后光催化效果基本不变。