An applied cell mapping method for optimal control problems

From the application point of view, a series of modifications are proposed for the cell mapping method discussed in Ref. 1 for the optimal control analysis of dynamical systems. The cell order around the target set is rearranged. A set of common discriminate principles is used for the selection of the optimal one among competing control strategies of the same cost. Inequality constraints of the system are taken into account. The number of elements in the set of allowable time intervals is not prescribed, but left open. These modifications seem to make the cell mapping method more efficient for analyzing feedback systems and for obtaining their global optimal control information. The algorithms presented in this paper could broaden the application of the cell mapping approach of Ref. 1 to a wider class of engineering problems.     

Nd0.5Ca0.5Mn1-xAlxO3 (x=0,0.03)体系中电荷有序态的超声研究

系统研究了Nd0．5Ca0．5Mn1-xAlxO3(x=0,0．03)单相多晶样品在低温下的电磁性质和超声特性．电阻和磁化率测量表明,Nd0．5Ca0.5O3体系在TCO-257 K处发生了电荷有序相变．超声声速从室温开始随着温度的降低逐渐减小,并在TCO附近达到最小,之后,随着温度的进一步降低,声速急刷增加,同时伴随着一个尖锐的超声衰减峰出现.TCO附近的超声异常表明体系中存在着强烈的电-声子相互作用,该电-声子耦合来源于Mn3 的Jahn-Teller效应．在低温下,出现了另一个超声衰减峰,它的出现归结为反铁磁相与顺磁相之间的相分离现象.随着Al在Mn位的掺入,超声声速的最低点和衰减峰向低温移动,表明体系中的电荷有序态和反铁磁相均被部分抑制,     

光码分多址系统中光学相关接收机判决阈值的分析

介绍了光码分多址系统中常用地址码（一维扩时码、二维码和三维码）的特点，并对它们各自的互相关均值和方差进行了理论分析。基于非相干光码分多址系统中光学相关接收机的基本原理，结合不同的用户地址码，对系统误码率性能进行了分析，得到了接收机最佳判决阈值与地址码基本特性参数和系统同时用户数间的关系。最后，给出了数值仿真结果。结果表明，对于采用特定地址码的光码分多址系统，只有选择合适的接收机判决阈值，系统的误码率性能才能达到最佳。研究结果对光码分多址系统中接收机判决阈值的选取具有一定的参考作用。     

运用量子约束动力学对具有耗散的量子位的追踪控制

在有限温度环境内，量子约束动力学及其追踪控制可使退相干系统的相干性稳定一段时间.约束方程产生的控制场能够按量子比特的动力学状态进行控制(量子动力学轨道的反馈控制)；依靠量子比特的这种反馈效应，可使量子位稳定在设定的时间内.同时，在量子位的稳定方面，温度扮演一种消极的角色. 关键词： 量子约束动力学 耗散量子位的控制 追踪控制 量子比特的反馈效应     

提高微晶硅薄膜太阳电池效率的研究

采用甚高频等离子体增强化学气相沉积技术制备了系列微晶硅薄膜太阳电池，指出了气体总流量和背反射电极的类型对电池性能参数的影响.电池的I-V测试结果表明：随反应气体总流量的增加，对应电池的短路电流密度、开路电压和填充因子都有很大程度的提高，结果使得电池的光电转换效率得以提高.另外，ZnO/Ag/Al背反射电极能明显提高电池的短路电流密度，进而也提高了电池的光电转换效率.对气体总流量和背反射电极类型影响电池效率的原因进行了分析. 关键词： 微晶硅薄膜太阳电池 气体流量 ZnO/Ag/Al背反射电极     

多相体系中Ni-PMMA纳米复合材料的γ辐射制备

在多相体系中 ,运用γ射线辐射法 ,在常温常压下成功地一步合成了镍 聚甲基丙烯酸甲酯 (Ni PMMA)纳米复合材料 .XRD、TEM分析和IR光谱表明 ,在此实验条件下 ,镍离子和甲基丙烯酸甲酯已成功地被还原或聚合 ,镍粒子为面心立方 ,尺寸为 7.33nm .研究显示 ,用醋酸钠代替氢氧化钠或氨水作为碱性试剂 ,可以有效地控制体系的pH ,同时不影响单体的聚合 .     

Existence and Uniqueness of Endemic States for the Age-structured MSEIR Epidemic Model

The existence and uniqueness of positive steady states for the age-structured MSEIR epidemic model with age-dependent transmission coefficient is considered. Threshold results for the existence of endemic states are established; under certain conditions, uniqueness is also shown.     

量子点器件的三端电测量研究

利用三端电测量方法，研究了调制掺杂二维电子气结构的量子点器件输运特性.报道了可分别测量二维电子气电阻和量子点隧穿电阻的实验方法.实验结果表明：量子点的横向耦合控制了量子点器件在小偏压下的电输运特性. 关键词： 自组装量子点 二维电子气 量子隧穿 肖特基接触     

双折射滤光片的色散特性研究

研究了由理想线偏振片和单轴双折射晶体波片组成的双折射滤光片倾斜放置时的二阶色散和 三阶色散特性，包括波片厚度、光线入射角和光轴旋转角的变化对二阶和三阶色散的影响. 还给出了双折射滤光片的群延迟表达式，并就色散特性与GT干涉仪进行了详细比较. 关键词： 双折射滤光片 群延迟 二阶色散 三阶色散     

Analysis of queueing policies in QoS switches

It is widely accepted that next-generation networks will provide guaranteed services, in contrast to the “best effort” approach today. We study and analyze queueing policies for network switches that support the QoS (Quality of Service) feature. One realization of the QoS feature is that packets are not necessarily all equal, with some having higher priorities than the others. We model this situation by assigning an intrinsic value to each packet. In this paper we are concerned with three different queueing policies: the nonpreemptive model, the FIFO preemptive model, and the bounded delay model. We concentrate on the situation where the incoming traffic overloads the queue, resulting in packet loss. The objective is to maximize the total value of packets transmitted by the queueing policy. The difficulty lies in the unpredictable nature of the future packet arrivals. We analyze the performance of the online queueing policies via competitive analysis, providing upper and lower bounds for the competitive ratios. We develop practical yet sophisticated online algorithms (queueing policies) for the three queueing models. The algorithms in many cases have provably optimal worst-case bounds. For the nonpreemptive model, we devise an optimal online algorithm for the common 2-value model. We provide a tight logarithmic bound for the general nonpreemptive model. For the FIFO preemptive model, we improve the general lower bound to 1.414, while showing a tight bound of 1.434 for the special case of queue size 2. We prove that the bounded delay model with uniform delay 2 is equivalent to a modified FIFO preemptive model with queue size 2. We then give improved upper and lower bounds on the 2-uniform bounded delay model. We also show an improved lower bound of 1.618 for the 2-variable bounded delay model, matching the previously known upper bound.