Three-dimensional numerical simulation of thermocapillary flow in a shallow cylindrical pool

In order to understand the characteristics of thermocapillary flow, we conducted a series of unsteady three-dimensional (3D) numerical simulations of thermocapillary flow for fluids with Prandtl number Pr = 0.011 and 1.0 in a shallow cylindrical pool with an azimuthal temperature non-uniform, an adiabatic solid bottom and free surface. The simulation results indicate that thermocapillary flow is steady 3D flow at the small temperature non-uniform. When temperature non-uniform exceeds some critical value, the flow will undergo a transition to 3D oscillatory flow, which is characterized by traveling oscillatory wave reversely along the flow direction on the free surface and diffusing to two sides at the same time. Further, the critical conditions for the flow transition are determined.     

HIRFL-CSR前端总线控制器的改进设计

论述了用于兰州重离子加速器冷却存储环(HIRFL CSR)控制系统的前端总线系统控制器的改进。 改进了控制器的嵌入式操作系统和应用程序, 开发了控制器和数据库交换数据的应用程序。 该控制器基于BGA封装的ARM920T(ARM9)处理器和嵌入式的LINUX操作系统, 可以连接标准的VGA显示器、 键盘、 鼠标, 采用了现场可编程的FPGA器件进行背板接口设计, 并具有64 mA高驱动能力的总线驱动器, 以及拥有灵活的接口信号定义可编程能力, 是HIRFL CSR控制系统的关键部件。 The EVME bus controller which is a key component of the HIRFL CSR control system was improved . Besides reconfiguring the embedded Linux, a utility program was developed for data exchange between the controller and the database. The bus controller is based on ARM920T(ARM9) micro processor which is BGA packaged. The bus controller has the universal interface of VGA display, keyboard, and mouse. The backboard interface logic is programmed in an in system configurable FPGA device. The bus can drive high current up to 64 mA, with the flexibility of the programmable signal definitions. All the improved performance helped the EVME bus controller play a crucial role in HIRFL CSR control system.     

铝箔腐蚀用大功率变频电源

研制了用于电解电容器阳极铝箔腐蚀的变频电源.设计了一种应用单片机控制的高频开关电源和用电子开关桥换相的低频变频、多波形大功率电源.该电源不需要庞大、笨重的变压器,而且频率下限不受限制,甚至可低至1Hz以下.     

二维非结构网格有限体积格式的壁热现象和人工热流方法

基于Noh人工热流方法的思想,推导出任意多边形网格人工热流的格式,将Noh的结构网格人工热流方法推广到任意多边形非结构网格的拉氏有限体积方法中,抑制或消除了壁热现象.几个数值实验,包括Noh激波反射问题和两块钢金属碰撞问题,验证了方法的可行性.     

Improving nucleation in the fabrication of high-quality 3D macro-porous copper film through the surface-modification of a polystyrene colloid-assembled template

A new approach is developed to the fabrication of high-quality three-dimensional macro-porous copper films. A highly-ordered macroporous copper film is successfully produced on a polystyrene sphere (PS) template that has been modified by sodium dodecyl sulfate (SDS). It is shown that this procedure can change a hydrophobic surface of PS template into a hydrophilic surface. The present study is devoted to the influence of the electrolyte solution transport on the nucleation process. It is demonstrated that the permeability of the electrolyte solution in the nanochannels of the PS template plays an important role in the chemical electrodeposition of high-quality macroporous copper film. The permeability is drastically enhanced in our experiment through the surface modification of the PS templates. The method could be used to homogeneously produce a large number of nucleations on a substrate, which is a key factor for the fabrication of the high-quality macroporous copper film.     

电感耦合等离子体原子发射光谱法同时测定槲寄生中的微量元素

采用硝酸-双氧水对槲寄生全药及煎煮液进行湿法消解,用电感耦合等离子体原子发射光谱法(ICP-AES)同时测定试样中Cu,Mg,Zn,Mn,Ni,Se,K,Na,Ca和Fe等元素的含量。该法的的加标回收率为91.6％～108.9％,变异系数为0.47％～4.59％,具有良好的准确度和精密度。结果表明：槲寄生中含有丰富的K和Ca元素,Na和Mg的含量也相对丰富,为进一步研究槲寄生的药理提供了科学的数据。     

毛细管区带电泳用于多种类兴奋剂的同时快速分离检测

建立了一种同时分离检测包括利尿剂、蛋白同化剂、β-阻断剂、麻醉剂、β2-激动剂、刺激剂等6类8种兴奋剂的毛细管区带电泳-紫外检测法。优化的色谱条件为：以50 mmol/L甲酸铵-氨水(pH 7.8)缓冲液为运行液,于3 kPa下进样10 s,分离电压为20 kV,检测波长为214 nm。在此条件下,8种兴奋剂在7 min内实现了快速的基线分离。在相应的浓度范围内,8种组分的浓度与峰高呈良好的线性关系,检出限达为0.2~0.7 μg/mL。该方法快速,分析成本低,无污染,非常适用于多种类兴奋剂的同时快速检测。     

近红外光谱方法在颌面外科皮瓣移植术后监测中的应用

近红外光谱技术作为一种无创组织氧监测手段,近年来在整形外科手术术后监测方面得到了越来越多的重视。文章利用一套近红外无损组织氧检测系统对6例手术成功病例的移植皮瓣侧和对照侧正常组织内的氧饱和度进行了长时间对比监测,发现两侧的组织氧饱和度之间存在显著性差异。还对一例血管吻合失败的病例下颌部的多个位置进行了检测,发现坏死部位的氧饱和度和正常组织相比处于很低的水平。实验结果表明,近红外光谱检测技术对于皮瓣内的血氧浓度动态变化具有很好的灵敏度,在移植皮瓣的术后监测方面具有良好的应用前景。     

巨豆三烯酮的合成及表征

采用这种合成方法的优点是原料易得,反应条件温和,操作比较简单,主要步骤产率较高,是合成目标产物的一种新方法,国内外未见文献报道。根据拟定的合成路线,通过实验对各步反应进行了研究,部分中间体经过折光率、红外(IR)、核磁共振(HNMR)、质谱(MS)等分析确定了其结构。实验证明该合成方法简单可行,目标产物的产率达24.3%,具有一定的继续研究开发价值。     

硬质聚氯乙烯氧指数标准物质的研制

研制硬质聚氯乙烯(硬质PVC)氧指数标准物质。对制备技术、均匀性检验、稳定性考察及定值不确定度进行了分析。研制的硬质PVC标准物质具有良好的均匀性和稳定性,定值数据呈正态分布,各实验室数据等精度。硬质PVC标准物质氧指数标准值为43．6％,扩展不确定度为0．7％。