STATISTICS OF A NOVEL CLASS OF LIQUID CRYSTAL POLYMERS

A novel class of the liquid crystal polymers with mesogens laterally attached to flexible main chain backbones has been synthesized recently by us. While the flexible backbones tend to take configuration of maximum entropy the mesogenic side groups tend to orientate because of the anisotropie soft dispersion forces. A mean field theory is presented to describe the competition between these two trends which makes it possible for this class of polymers to show anisotropic (liquid crystal) phase within certain temperature range where the polymer main chains and the side chain mesogens will take approximately parallel arrangement, which is different from the normal side chain liquid crystal polymers. The temperature range of the liquid crystal phase, its ordering and phase transition all depend on the flexibility of the backbone, the strengthof the anisotropic forces of the side groups and the hinge elasticity. The results show that the liquid crystalisotropic phase transition is of the first order. The phase diagram, i. e. the dependence of the transition temperature on the structure of the polymers is also given.     

Electrochemical vapor generation of selenium species after online photolysis and reduction by UV-irradiation under nano TiO<Subscript>2</Subscript> photocatalysis and its application to selenium speciation by HPLC coupled with atomic fluorescence spectrometry

An online UV photolysis and UV/TiO₂ photocatalysis reduction device (UV–UV/TiO₂ PCRD) and an electrochemical vapor generation (ECVG) cell have been used for the first time as an interface between high-performance liquid chromatography (HPLC) and atomic fluorescence spectrometry (AFS) for selenium speciation. The newly designed ECVG cell of approximately 115 L dead volume consists of a carbon fiber cathode and a platinum loop anode; the atomic hydrogen generated on the cathode was used to reduce selenium to vapor species for AFS determination. The noise was greatly reduced compared with that obtained by use of the UV–UV/TiO₂ PCRD–KBH₄–acid interface. The detection limits obtained for seleno-DL-cystine (SeCys), selenite (Se^IV), seleno-DL-methionine (SeMet), and selenate (Se^VI) were 2.1, 2.9, 4.3, and 3.5 ng mL^–1, respectively. The proposed method was successfully applied to the speciation of selenium in water-soluble extracts of garlic shoots cultured with different selenium species. The results obtained suggested that UV–UV/TiO₂ PCRD–ECVG should be an effective interface between HPLC and AFS for the speciation of elements amenable to vapor generation, and is superior to methods involving KBH₄.     

A facile synthesis of highly functionalized dihydrofurans based on 1,4-diazabicyclo[2.2.2]octane (DABCO) catalyzed reaction of halides with enones

Treatment of halides 5 with electrophilic alkenes 2 afforded the corresponding dihydrofurans 3 and 4 in the presence of 1, 4-diazabicyclo[2.2.2]octane (DABCO) with good to excellent yields and in a stereoselective manner in most cases. Moreover, the stereoisomers 3 and 4 could be easily transformed each other in the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU).     

硅胶催化的选择性去除N-Boc保护基

发现了在回流的甲苯中, 以硅胶为催化剂, 多种N-Boc保护的伯胺、仲胺、氨基酸的氨基都可以迅速脱除Boc. 该方法具有条件温和、操作简便、反应时间短和产率高等优点. 同时, 其它常用的保护基Cbz和Fmoc等在同样的条件下不受影响.     

Simultaneous Determination of Enalapril and Enalaprilat in Human Plasma by LC-MS: Application to a Bioequivalence Study

A rapid, simple and specific liquid chromatography-electrospray ionization mass spectrometry (LC-ESI-MS) method has been developed and validated for the simultaneous determination of enalapril and its major active metabolite enalaprilat in human plasma. Benazepril hydrochloride was used as the internal standard. Plasma was deproteinized with acetone and centrifuged. The supernatant was transferred and evaporated to dryness and the residue dissolved in mobile phase. Samples were separated on a C18 column with a mobile phase of methanol–20 mM ammonium acetate (53:47, v/v) containing 0.15% trifluoracetic acid (v/v) with a pH of 3.0. Enalapril, enalaprilat and the internal standard were measured by electrospray positive selective ion monitoring mode. The method was validated over a linear range of 1.56–400 ng mL⁻¹ and the limits of quantification were 1.56 ng mL⁻¹ for both enalapril and enalaprilat using 0.1 mL plasma. Extraction efficiency was more than 84% and recoveries were in range of 93.65–101.17%. The intra-day relative standard deviations (RSD) were less than 8.16 and 7.05% and inter-day RSDs were within 8.42 and 5.72% for enalapril and enalaprilat, respectively. The storage stability of QC samples was investigated under various conditions. The method was successfully applied for the evaluation of the pharmacokinetics and bioequivalence of enalapril and enalaprilat in 20 healthy volunteers after an oral dose of 20 mg enalapril maleate.     

Inorganic speciation of As(III, V), Se(IV, VI) and Sb(III, V) in natural water with GF-AAS using solid phase extraction technology

The paper presents a procedure for the multi-element inorganic speciation of As(III, V), Se(IV, VI) and Sb(III, V) in natural water with GF-AAS using solid phase extraction technology. Total As(III, V), Se(IV, VI) and Sb(III, V) were determined according to the following procedure: titanium dioxide (TiO₂) was used to adsorb inorganic species of As, Se and Sb in sample solution; after filtration, the solid phase was prepared to be slurry for determination. For As(III), Se(IV) and Sb(III), their inorganic species were coprecipitated with Pb-PDC, dissolved in dilute nitric acid, and then determined. The concentrations of As(V), Se(VI) and Sb(V) can be calculated by the difference of the concentrations obtained by the above determinations. For the determination of As(III), Se(IV) and Sb(III), palladium was chosen as a modifier and pyrolysis temperature was 800 °C. Optimum conditions for the coprecipitation were listed for 100 ml of sample solution: pH 3.0, 15 min of stirring time, 40.0 μg l⁻¹ Pb(NO₃)₂ and 150.0 μg l⁻¹ APDC. The proposed method was applied to the determination of trace amounts of As(III, V), Se(IV, VI) and Sb(III, V) in river water and seawater.     

Ni添加对0.4Zr0.1V1.1Mn0.5Cr0.1合金的相结构和电化学性能的影响

本文通过XRD、SEM、EDS研究了Ti_0.4Zr_0.1V_1.1Mn_0.5Cr_0.1Ni_x(x=0，0.2，0.4，0.6，0.8)合金的相结构和电化学性能。该合金系由BCC结构的V基固溶体主相和六方结构的C14 Laves第二相组成，Ni能够促进第二相的生成，Ni含量的增加导致了各相中的化学组成和晶格参数的变化，并通过电化学方法研究了Ni含量对_0.4Zr_0.1V_1.1Mn_0.5Cr_0.1合金电极的最大放电容量、自放电性能、高倍率放电性能、循环稳定性能等的影响。     

C12-2-En-C12•2Br与SDS混合水溶液的胶团化研究

与[C12H25N＋(CH3)2CH2]2•2Br－(简记为C12-2-C12•2Br)/ C12H25SO4Na(SDS)混合水溶液相比,随着联接链上乙氧基团(E)数目增加,[C12H25N＋(CH3)2]2C2H4(OC2H4)n•2Br－(简记为C12-2-En-C12•2Br, n=2,3)与SDS混合水溶液澄清区域明显增大. C12-2-E3-C12•2Br/SDS混合胶团化过程中二组分产生了协同效应,理论预测在澄清区域所能达到的最小临界胶团总浓度(cmcT,min)= 0.0339 mmol•L－1,对应的SDS在溶液体相中的摩尔分数(x2*)=0.447.当水溶液体相中SDS摩尔分数(x2)=0.5时,混合胶团总聚集数(NT)=36,混合胶团中SDS的摩尔分数(x2M)=0.43.     

涂料中甲醛的分光光度测定新方法

在FeCl3存在的盐酸介质中,甲醛与蛋白胨反应生成紫色化合物,最大吸收波长555 nm,甲醛浓度在1~25μg/10 mL范围内,吸光度与浓度成线性关系,线性相关系数r2=0.9997,检出限0.05μg/mL。用本法测定经活性炭脱色的水溶性涂料中的甲醛含量,回收率为96.46%~103.32%,相对标准偏差(n=6)为1.36%~2.09%。     

合成天然产物曲古抑菌素A的新方法

报道了一条组蛋白去乙酰化酶抑制剂曲古抑菌素A的有效合成路线. 通过L-脯氨酸催化对硝基苯甲醛与丙醛的羟醛缩合反应, 高立体选择性地构建了目标分子的手性中心, 羟醛缩合产物的ee值大于99%, anti∶syn＝16∶1. 随后的合成过程中无消旋化现象, 合成的曲古抑菌素A是单一R型异构体, ee值大于99%.