富马酸丙酚替诺福韦合成工艺改进

对富马酸丙酚替诺福韦的合成工艺进行了改进,以干燥的替诺福韦为起始原料,与亚磷酸三苯酯反应得到(R)-9-(2-(苯基磷酰基甲氧基)丙基)腺嘌呤（3）; 3被氯化亚砜氯代得(R)-9-(2-(((苯基)(氯代)(磷酰基)甲氧基)丙基)腺嘌呤（4）; 4与L-丙氨酸异丙酯盐酸盐缩合得9-((R)-2-(((S)-((1-(异丙氧基羰基)乙基)氨基)苯氧基磷酰基)甲氧基)丙基)腺嘌呤（5）; 5经析晶纯化得9-((R)-2-(((S)-（((S)-1-(异丙氧基羰基)乙基)氨基)苯氧基磷酰基)甲氧基)丙基)腺嘌呤（丙酚替诺福韦,6）; 6与富马酸成盐得富马酸丙酚替诺福韦,其结构经¹H NMR, ¹³C NMR, MS(ESI),元素分析和XRD确证。按改进工艺进行公斤级规模放大,产品总收率达到32.2%,化学纯度99.92%,非对映异构体纯度99.99%。     

新型2-吡啶苄基胺类罗丹明基活性小分子探针的合成

以罗丹明B和乙二胺为原料,通过缩合反应制得罗丹明酰乙二胺(1, Rhb);然后以无水THF作溶剂,化合物1与三聚氯嗪发生亲核取代反应,得到罗丹明酰乙二胺-三聚氯嗪化合物(2, Rhbc);最后在氮气氛围下,化合物2与N,N-二甲基吡啶胺反应合成了目标产物双(2 吡啶苄基) 胺罗丹明基小分子探针(3, Rhbd),其结构经¹H NMR、 IR、 HR-MS和元素分析表征。该探针可以识别Fe³⁺,检出限为30 nM。     

C5a受体拮抗剂W-54011的合成

以7-甲氧基-1-萘满酮为原料,经Wittig反应、去甲基化、烯醇互变和Jones氧化反应等制得关键中间体7-甲氧基-1,2,3,4-四氢化萘-1-羧酸(4); 4-异丙基苯胺和4-(二甲基胺基)苯甲醛经过还原胺化反应得(E)-4-{[(4-异丙基苯基)亚胺基]甲基}-N,N-二甲基苯胺(6); 4转化为相应的酰氯后与6反应合成N-[4-(二甲基氨基)苄基]-N-(4-异丙基苯基)-7-甲氧基-1,2,3,4-四氢化萘-1-甲酰胺(W-54011),总收率24%,其结构经¹H NMR, ¹³C NMR和HR-MS（ESI）表征。      

稀土配位聚合物荧光探针的制备及其对痕量汞离子的检测

以稀土金属铽离子为发光中心离子,鸟苷酸(GMP）为配体制备得到了能够发射绿色荧光的稀土配位聚合物。并通过加入小牛胸腺DNA溶液进一步增强荧光强度,形成“turn-on”荧光类型的稀土配合物,利用汞离子与小牛胸腺DNA的结合以及与配体GMP的相互作用使荧光猝灭,形成“turn-on-off”类型稀土荧光探针,实现了汞离子的检测。Hg2+质量浓度在50~1 200 μg·L-1范围内与体系荧光强度变化程度呈线性关系(I0-I）/I0=0.000 2C+0010 7,相关系数(r2）为0.991 5,检出限为1.5 μg·L-1,相对标准偏差(RSD)为2.3%。对河水中Hg2+进行加标回收检测,回收率为98.1%~99.8%,RSD为0.28%~1.9%。     

Reaction Mechanism of H2-Assisted C3H6-SCR over Ag-CexZr Catalyst as Investigated by In situ FTIR

A series of silver-doped cerium zirconium oxide(Ag-Ce_xZr) samples was synthesized successfully for selective catalytic reduction of nitric oxide(NO) with hydrogen and propene(H₂/C₃H₆-SCR) under excess oxygen condition. The catalytic activity test proved that Ag-Ce_0.4Zr exhibited the best C₃H₆-SCR activity. Hydrogen(H₂) significantly enhanced NO conversion and widened the temperature window. Multi-technology characterizations were conducted to ascertain the properties of fabricated catalysts including X-ray diffraction(XRD), Fourier transform infrared spectrometry(FTIR), scanning electron microscopy(SEM) and H₂ temperature programmed reduction (H₂-TPR). In situ FTIR results demonstrated that various types of nitrates and chelating nitrite were generated on Ag-Ce_xZr after introduction of NO. Besides, adding H₂ could increase the concentration of bidentate nitrate and chelated bidentate nitrate dramatically, especially for Ag-Ce_0.4Zr catalyst. Transient reaction between pre-adsorbing NO and C₃H₆/C₃H₆+H₂ illuminated that the most active intermediate was chelating nitrite,which was promoted significantly by H₂ participation. Furthermore, adding H₂ improved the formation of organo-nitro(R-NO₂), which was the key intermediate in C₃H₆-SCR. The reaction mechanism over Ag-Ce_xZr catalysts was proposed at 200℃ as follows:nitric oxide(NO)+propene(C₃H₆)+hydrogen(H₂)+oxygen(O₂)→chelating nitrite(NO₂^-)+acrylate-type species(C_xH_yO_z)→organo-nitro(R-NO₂)→isocyanate(-NCO)+cyanide(-CN)→nitrogen(N₂).     

In situ Carbon Modification of g-C3N4 from Urea co-Crystal with Enhanced Photocatalytic Activity Towards Degradation of Organic Dyes Under Visible Light

An in situ strategy was introduced for synthesizing carbon modified graphitic carbon nitride(g-C₃N₄) by using urea/4-aminobenzoic acid(PABA) co-crystal(PABA@Urea) as precursor materials. Via co-calcination of the PABA co-former and the urea in PABA@Urea co-crystals, C guest species were generated and compounded into g-C₃N₄ matrix in situ by replacing the lattice N of the carbon nitride and forming carbon dots onto its layer surface. The carbon modification dramatically enhanced visible-light harvesting and charge carrier separation. Therefore, visible light photo-catalytic oxidation of methylene blue(MB) pollution in water over the carbon modified g-C₃N₄(C/g-C₃N₄) was notably improved. Up to 99% of methylene blue(MB) was eliminated within 60 min by the optimal sample prepared from the PABA@Urea co-crystal with a PABA content of 0.1%(mass ratio), faster than the degradation rate over bare g-C₃N₄. The present study demonstrates a new way to boost up the photocatalysis performance of g-C₃N₄, which holds great potential concerning the degradation of organic dyes from water.     

超声心动图联合动态心电图检查对急性心肌梗死诊断和预后评估的价值

为探讨超声心动图联合动态心电图检查在急性心肌梗死(AMI)患者诊断和预后评估中的应用价值,本研究选取2016年6月~2018年6月我院收治并确诊的100例AMI患者作为观察组,另选取同期100例非冠心病患者作为对照组。以AMI患者心源性死亡为终点事件,将观察组分为死亡组(n=15)和存活组(n=85)。所有患者均采用飞利浦IU-Elite及EPIQ5彩色多普勒超声诊断仪进行超声心动图检查,采用DMS-3004A进行标准的12导联动态心电图检查。比较各组患者心率震荡指标[震荡起始(TO)、震荡斜率(TS)]、心率变异性指标[NN间期标准差(SDNN)、QT离散度(QTd)、经心率校正的QT离散度(QTcd)]及心功能指标[左心室舒张末期内径(LVEDD)、左心室射血分数(LVEF)]水平的变化。结果显示,观察组TO、QTd、QTcd、LVEDD均明显高于对照组,TS、SDNN、LVEF均明显低于对照组,差异有统计学意义(P<0.05)。死亡组TS、SDNN均明显低于存活组,差异有统计学意义(P<0.05);死亡组TO高于存活组,QTd、QTcd、LVEF、LVEDD均低于存活组,但差异无统计学意义(P>0.05)。本研究结果表明,AMI患者心率震荡(HRT)明显减弱甚至消失,HRV、LVEF明显降低,LVEDD、QTd明显增大,QT间期明显延长。超声心动图和动态心电图联合检查对AMI患者诊断及预后评估均有重要的临床应用价值。     

基于大偏差理论非高斯随机动力系统离出行为研究

本文介绍了大偏差理论的基本思想及其在非高斯随机动力系统的离出问题研究中的应用.依据不同的非高斯噪声类型,本文分别评述了随机混合系统、指数轻跳跃过程和α稳定Lévy噪声驱动的随机动力系统的离出问题的主要研究方法和近期研究进展.针对随机混合系统,本文介绍了利用随机微分方程对其进行近似的拟稳态扩散近似方法,计算拟势和最优离出路径的WKB近似方法与细致平衡条件的研究,以及求解随机混合系统的简化版本(即生灭过程)的离出问题的研究进展.对于指数轻跳跃过程驱动的随机动力系统,本文介绍了其大偏差原理和中度偏差原理的泛函极值问题的建立,拟势概念的定义和平均离出时间的估计.针对具有α稳定Lévy噪声的随机动力系统,本文介绍了计算平均首次离出时间和离出概率的理论和数值方法,计算最优离出路径的Onsager-Machlup理论、机器学习方法、最大似然法和数据驱动方法.最后,给出了非高斯随机动力系统的离出现象相关的一些开放性问题.     

滑坡冲击铲刮变量的计算方法研究

高速远程滑坡运动过程中,冲击铲刮效应不仅增加滑坡的体积与规模,而且会增大滑坡成灾范围,风险预测与判断出现明显误差,导致灾难性事件的发生。目前对于高速滑坡的铲刮深度、铲刮范围和铲刮体积等变量计算往往是采用基于经验的铲刮率算法,其是通过体积增量来反算铲刮变量的数学方法,而实际情况中高速滑坡的冲击铲刮是滑体冲击力和地表可铲刮材料之间的力学屈服破坏作用的结果。本文基于接触力学、弹塑性力学和岩土力学,提出了地表可铲刮层在附加冲击荷载作用下铲刮变量的理论计算方法,认为竖向冲击和切向剪切是滑体冲击铲刮过程的两种主要作用方式。结合实际岩土体材料参数,发现不考虑切向荷载时,铲刮层塑性区主要以竖向破裂区为主,考虑切向荷载时,铲刮层塑性区沿切向迁移,直至塑性边界贯通至地表,符合实际情况,实现了对铲刮变量的定量化计算。     

基于泰勒展开的二阶层次分析法初探

经典AHP常用于武器装备效能或能力评估,然而经典AHP采用线性加权模型,即通过底层指标效能线性加权得到顶层指标效能,对非线性体系往往会引入较大评估误差,易产生决策性错误。为解决这一问题,本文以底层指标效能值等于1/2为展开点,给出基于泰勒展开的二阶加权模型,对线性体系,二阶加权模型可退化为经典线性加权模型;推导出二阶AHP的数学表达式,给出二阶AHP效能评估步骤,构建二阶AHP的基本框架。算例表明,二阶AHP评估结果相比经典AHP更接近于解析解,产生决策性错误的机率远小于经典AHP。