Self‐Healable Electrically Conducting Wires for Wearable Microelectronics

Electrically conducting wires play a critical role in the advancement of modern electronics and in particular are an important key to the development of next‐generation wearable microelectronics. However, the thin conducting wires can easily break during use, and the whole device fails to function as a result. Herein, a new family of high‐performance conducting wires that can self‐heal after breaking has been developed by wrapping sheets of aligned carbon nanotubes around polymer fibers. The aligned carbon nanotubes offer an effective strategy for the self‐healing of the electric conductivity, whereas the polymer fiber recovers its mechanical strength. A self‐healable wire‐shaped supercapacitor fabricated from a wire electrode of this type maintained a high capacitance after breaking and self‐healing.     

Tunable Surface‐Enhanced Raman Scattering from High‐Density Gold Semishell Arrays with Controllable Dimensions

A convenient reproducible technique is reported for the fabrication of large‐area gold semishell arrays by mechanically pressing porous anodic alumina (PAA) stamps into gold/polymer bilayer structures that serve as robust and cost‐efficient surface‐enhanced Raman‐scattering (SERS) substrates. The surface structure can be tuned further to optimize the enhancement factor according to optional PAA fabrication parameters and imprinting pressures. Finite‐difference time‐domain calculations indicate that the structure may possess excellent SERS characteristics due to the high density and abundance of hot spots.     

High‐expression β1 adrenergic receptor/cell membrane chromatography method based on a target receptor to screen active ingredients from traditional Chinese medicines

β‐Adrenergic receptors are important targets for drug discovery. We have developed a new β₁‐adrenergic receptor cell membrane chromatography (β₁AR‐CMC) with offline ultra‐performance LC (UPLC) and MS method for screening active ingredients from traditional Chinese medicines. In this study, Chinese hamster ovary‐S cells with high β₁AR expression levels were established and used to prepare a cell membrane stationary phase in a β₁AR‐CMC model. The retention fractions were separated and identified by the UPLC–MS system. The screening results found that isoimperatorin from Rhizoma et Radix Notopterygii was the targeted component that could act on β₁AR in similar manner of metoprolol as a control drug. In addition, the biological effects of active component were also investigated in order to search for a new type of β₁AR antagonist. It will be a useful method for drug discovery as a leading compound resource.     

泡沫铝负载钌基催化剂应用于N2O的低温催化分解研究

将导热性能良好的泡沫铝作为载体,羰基钌为前驱体制备了一系列不同形态的钌基催化剂应用于N2O的低温催化分解研究.采用XRD、XPS、SEM、TEM、BET、H2-TPR等方法对催化剂进行了表征,于石英管固定床反应器上对催化剂性能进行了评价.重点考察了泡沫铝作为催化剂载体的可行性、载体的处理方法对催化剂活性的影响以及RuO2、Ru、Ru3(CO)12所表现出的活性差异.结果表明:泡沫铝作为催化剂载体,能够促进N2O的催化分解;泡沫铝经H2O2处理有利于提高其对活性中心的附着力,提高催化活性;N2O浓度为1%,Ru负载量为0.3%,活性中心分别为Ru3(CO)12、Ru、RuO2时,N2O完全转化温度依次为285、380和415℃;活性较高的Ru3(CO)12/泡沫铝催化剂在长时间作用后活性组分转变为RuO2.     

Synthesis and thermal properties of novel calix[4]arene derivatives containing 1,2,3-triazole moiety via K2CO3-catalyzed 1,3-dipolar cycloaddition reaction

Two calix[4]arene derivatives containing 1,2,3-triazole moiety were synthesized via K2CO3-catalyzed1,3-dipolar cycloaddition reaction between calix[4]arene-based azide and active methylene compounds in good yields.The structures of the two compounds synthesized herein were fully confirmed by 1HNMR,,（13）C NMR,and MS（ESI）.The thermal analysis showed that the mass losses of the synthesized compounds 4 and 5 containing 1,2,3-triazole groups are similar to each other.     

Bromodimethylsulfonium bromide: A brominating reagent for the conversion of anthracene into 9,10-dibromoanthracene

Bromodimethylsulfonium bromide(BDMS) was used as an efficient brominating reagent for the synthesis of 9,10-dibromoanthracene in dichloromethane. The desired products were obtained in excellent yields.     

Oxygen permeation and phase structure properties of partially A-site substituted BaCo_(0.7)Fe_(0.225)Ta_(0.075)O_(3-δ) perovskites

Ba0.9R0.1Co0.7Fe0.225Ta0.075O3-δ(BRCFT, R = Ca, La or Sr) membranes were synthesized by a solid-state reaction. Metal cation Ca2+,La3+or Sr2+doping on A-site partially substituted Ba2+in BaCo0.7Fe0.225Ta0.075O3-δoxides, and its subsequent effects on phase structure stability, oxygen permeability and oxygen desorption were systematically investigated by XRD, TG-DSC, H2-TPR, O2-TPD techniques and oxygen permeation experiments. The partial substitution with Ca2+, La3+or Sr2+, whose ionic radii are smaller than that of Ba2+, succeeded in stabilizing the cubic perovskite structure without formation of impurity phases, as revealed by XRD analysis. Oxygen-involving experiments showed that BRCFT with A-site fully occupied by Ba2+exhibited good oxygen permeation flux under He flow, reaching about 2.3mL min-1 cm-2at 900 ℃ with 1 mm thickness. Of all the membranes, BLCFT membrane showed better chemical stability in CO2, owing to the reduction in alkalinity of the mixed conductor oxide by La doping. In addition, we also found the stability of the perovskite structure under reducing atmospheres was strengthened by increasing the size of A-site cation(Ba2+La3+Sr2+Ca2+).     

C_(60)亚甲基衍生物的制备与表征

对富勒烯C60进行化学改性,合成的材料适用于聚合物太阳能电池的受体材料。以对甲氧基苯甲醇为起始原料,再经过几步酯化反应,生成不对称丙二酸双酯,最后利用Bingel反应制备出一种C60富勒烯衍生物,作为潜在的光电材料,其光电特性经CV和UV表征。通过经验公式计算其LUMO能级比PCBM高出0.13eV,是一种潜在的受体材料。     

以一种新型Gemini表面活性剂作为介孔模板剂通过转晶过程合成介孔ZSM-5分子筛

将一种新型Gemini表面活性剂,丙撑基双(十八烷基二甲基氯化铵)[C18H37(CH3)2–N+–(CH2)3–N+–(CH3)2C18H37]Cl2(C18-3-18),作为介孔模板剂用于水热法合成介孔ZSM-5分子筛.结果表明,在130 oC低温晶化即可高效合成介孔ZSM-5分子刷.C18-3-18的加入量可影响到所合成介孔ZSM-5分子筛的相对结晶度和织构性质,它的形成遵从一个转晶过程.在合成初期,凝胶中介孔模板剂C18-3-18的使用导向了介孔材料的生成;随后在TPABr的模板作用下,介孔材料慢慢转晶生成具有MFI结构的介孔ZSM-5;然后所合成的介孔ZSM-5晶粒进一步长大并聚集形成块状颗粒,同时产生晶间介孔.C18-3-18作为介孔导向剂不仅可用于合成介孔ZSM-5分子筛,也可用于其它介孔分子筛的合成中.     

N2/Ar等离子体改性对CuO/TiO2可见光光催化活性的影响

研究了N2/Ar介质阻挡放电处理对负载CuO的TiO2可见光光催化活性的影响.采用X射线衍射、紫外-可见分光吸收光谱、透射电镜、X射线光电子能谱和电子自旋共振进行了表征,详细考察了等离子改性参数包括气氛组成、处理时间和处理功率对改性效果的影响,并通过降解甲基橙溶液考察了可见光光催化活性.结果表明,最佳等离子处理条件为N2与Ar比例为8:2,处理时间为20 min,放电电流为1.0 A.最后,使用改性后的光催化剂对模拟含汞废水进行了处理.