纤维素乙醇产业化

由于能发挥缓解能源紧张、减少环境污染、促进农村发展等重要作用,利用年产量巨大的植物纤维资源,生产可再生性液体替代燃料乙醇的技术受到了巨大的关注,成为工业生物技术的研究热点.酶法生产纤维素乙醇面临多种困难:纤维素原料比重轻,收集运输不便;原料结构复杂,需要深度预处理;纤维素酶系的酶解效率有待提高;半纤维素中的木糖难以发酵转化为乙醇等.经过多年研究,新技术已经取得重大进展,开始接近实用化.紧迫的社会需求正在迫使国内外政府和企业界大量投资,开展纤维素乙醇的中试研究和试生产,力求在短时期内克服上述难点,尽快实现产业化.充分利用植物纤维资源中的多种组分,联合生产乙醇和部分高值产品的生物精练技术,是实现纤维素乙醇产业化的重要突破口和必然途径.玉米芯生物精练生产乙醇和木糖相关产品的技术正在进行产业化.本文综述了纤维素乙醇产业化的研究进展并做了展望.     

流动注射分析光度法同时测定镍和铁

建立了流动注射（ＦＩＡ）光度法同时测定镍和铁的新方法，以乙酸－乙酸钠缓冲溶液（ＰＨ４．５０）作载液，溴化十六烷基三甲胺作增溶剂，记录５６０ｎｍ处Ｎｉ（Ⅱ）－Ｂｒ－ＰＡＤＡＰ与Ｆｅ（Ⅱ）－Ｂｒ－ＰＡＤＡＰ的峰值吸收之和７４６ｎｍ处Ｆｅ（Ⅱ）－Ｂｒ－ＰＡＤＡＰ的吸不度测定了钠基合金中的镍和铁。两咱离子的定量线性范围分别为０．１０－１．２０ｍｇ／ｌＬ和０．２０－１．６０ｍｇ／Ｌ，检出限为０．０２ｍｇ／Ｌ     

水杨酸与二烷基亚磷酸酯反应历程31P NMR与电喷雾质谱跟踪研究

The reaction between salicylic acid and dialkyl phosphite was traced by electrospray ionization mass spectrometry and ^31P NMR. All reactants, unstable intermediates and products were detected. The mechanism was proposed based on ESI-MS results and ^31P NMR profiles.     

CaClH2PO4·H2O的合成及其性质的研究

本文介绍了CaClH_2PO_4·H_2O的合成和纯化的方法。用精密量热计系统测定了CaClH_2PO_4·H_2O的标准生成焓在298.15K时为-2282.34kJ mol~(-1)。评述和讨论了热分解反应的化学动力学性质,测定了分解反应的级数和表现活化能。     

Synthesis, characterization, and biological activities of some transition metal(II) complexes with the thiosemicarbazone derived from 4-[1-(4-methylphenylsulfonyl)-1H-indol-3-yl]but-3-en-2-one

A new 4-[1-(4-methylphenylsulfonyl)-1H-indol-3-yl]but-3-en-2-one thiosemicarbazone (HL) was synthesized derived from 4-[1-(4-methylphenylsulfonyl)-1H-indol-3-yl]but-3-en-2-one. Four transition metal(II) complexes of HL have been prepared. Elemental analysis, molar conductivity, IR, UV, ¹H NMR spectra, and TG-DTA have been used to characterize these complexes. The complexes have the general formula ML₂, where M = Zn, Cu, Co, and Ni. The ligand and its complexes have been studied for their possible biological activity including anti-inflammatory, antibacterial, and antitumour activity in vitro.     

Diastereoselective protonation of lactam enolates derived from (R)-phenylglycinol. A novel asymmetric route to 4-phenyl-1,2,3, 4-tetrahydroisoquinolines

Highly diastereoselective protonation of chiral lactam enolates of 4-substituted-1,4-dihydroisoquinolin-3-ones is reported. Protonation and alkylation processes of these lactam enolates derived from phenylglycinol occur with opposite diastereofacial selectivity. This diastereoselective protonation has been applied to the asymmetric synthesis of (4S)-N-methyl-4-phenyl-1,2,3,4-tetrahydroisoquinoline 9 obtained in up to 97% ee.     

Synthesis of a Novel Type of Phosphates of Puerarin

A novel type of phosphated puerarin derivatives were synthesized through a simplified Atheron‐Todd reaction for the first time. The structure of these compounds were elucidated by IR, ESI‐MS and NMR. Moreover, the reason the dialkylphophite reagent had different chemselectivities toward different hydroxys on the puerarin was discussed.     

High-performance liquid chromatography of some basic drugs on a n-octadecylphosphonic acid modified magnesia-zirconia stationary phase

The high-performance liquid chromatographic behavior of some basic drugs was studied on a n-octadecylphosphonic acid modified magnesia-zirconia (C18PZM) stationary phase. The effect of mobile phase variables such as methanol content, ionic strength, and pH on their chromatographic behavior was investigated. The retention mechanism of basic drugs on the stationary phase was elucidated. The results indicate that both hydrophobic and cation-exchange interactions contribute to solute retention under most chromatographic conditions. The inherent Br?nsted-acid sites and also the adsorbed Lewis base anionic buffer constituents on accessible ZM surface Lewis acid sites play a role in the retention of ionized solutes by cation-exchange interaction. However, especially at high mobile phase pH, the retention of basic drugs depends mainly on hydrophobic interactions between solutes and support. Separations of the basic drugs on the C18PZM phase by a predominantly reversed-phase retention mode were very promising. The mixed-mode retention feature on this phase, as a result of the adsorbed Lewis base anionic buffer constituents acting as sites for cation-exchange, could also be very useful, e.g. for enhancing the chromatographic selectivity of such analytes. The C18PZM seems to be an excellent alternative to silica-based reversed-phase stationary phase for the separation of strongly basic solutes.     

Assignment of acetyl groups to O-2 and/or O-3 of pectic oligogalacturonides using negative electrospray ionization ion trap mass spectrometry

Partially acetylated and methylated oligogalacturonides produced by enzymatic hydrolysis of sugar beet pectin were analysed by negative electrospray ionization ion trap mass spectrometry (ESI-ITMS). The (18)O labelling of the oligomer reducing end allowed the precise assignment of the fragments resulting from glycosidic bond and cross-ring cleavages. The collisional-induced dissociation of the C(i) and Z(j) fragment ions through sequential MS(n) experiments always displayed (0, 2)A-type cross-ring cleavage ions which were related to C(2)H(4)O(2) losses. These (0, 2)A ions appeared to be highly diagnostic ions allowing the precise location of the acetyl groups to the O-2 and/or O-3 of the acetylated galacturonic acid residues.     

Intramolecular Alkyne Coupling in the Reaction of 1,8-bis(phenylethynyl)naphthalene with Pt2Ru4(CO)18

The reaction of Pt₂Ru₄(CO)₁₈, 1 with 1,8-bis(phenylethynyl)naphthalene, 2 has yielded two metal carbonyl cluster complexes: Ru₂(CO)₆[- ²-C₁₀H₆C₄Ph₂], 3 (60% yield) and Ru₂Pt(CO)₆[- ²-C₁₀H₆C₄Ph₂]₂, 4 (8% yield). Both compounds were characterized by a single crystal X-ray diffraction analysis. Both products were formed as a result of fragmentation of the Pt₂Ru₄ cluster of 1. Compound 3 contains two ruthenium atoms. They are bridged by a tricyclic C₁₀H₆C₄Ph₂ ligand formed by the coupling of the two -carbon atoms of the alkyne groups. The -carbon atoms of the alkynes are -bonded to one of the ruthenium atoms to form a metallacycle and this entire group is -bonded to the second ruthenium atom. Compound 4 contains two ruthenium atoms with a platinum atom between them. This molecule contains two tricyclic C₁₀H₆C₄Ph₂ ligands similar to that in 3, and two metallacycles formed by coordination of the -carbon atoms of both ligands to the platinum atom. One ligand is -bonded to each of the ruthenium atoms.