聚苯硫醚／石墨基双极板复合材料性能的研究

以聚苯硫醚树脂和人造石墨为原料一次模压成型制备双极板复合材料.研究了模压成型过程中加压时机、冷却方式及人造石墨原料对复合材料电导率和弯曲强度的影响.结果表明,制备聚苯硫醚/石墨基双极板材料宜选用石墨化程度较高且结构密实的石墨粉料;采用保温后加压及空气中冷却方式制备的复合材料的综合性能较优.     

Na离子和Cl离子引起He原子直接多重电离过程的研究

利用2～8 MeV的Naq+、Clq+(q=2,3,4,5)轰击氦原子,对碰撞的直接多重电离过程进行研究.实验采用反冲离子-散射离子飞行时间符合技术,通过反冲离子飞行时间谱区分不同价态反冲离子;利用静电偏转和位置灵敏探测技术区分不同电荷态散射离子;结合CAMAC-PC多参数获取系统得到一定价态散射离子所对应的反冲离子电荷态分布谱;经分析该谱得到直接多重电离截面与直接单电离截面之比R21.讨论了R21随入射离子速度和电荷态的变化关系.     

一类广义Lanchester模型的数值解及若干结论

本讨论了一类广义的Lanchester模型在一些限制条件下的近似解，并给出了若干结论。     

Nonlinear rheological behavior of silica filled solution‐polymerized styrene butadiene rubber

The reinforcement and nonlinear viscoelastic behavior have been investigated for silica (SiO₂) filled solution‐polymerized styrene butadiene rubber (SSBR). Experimental results reveal that the nonlinear viscoelastic behavior of the filled rubber is similar to that of unfilled SSBR, which is inconsistent with the general concept that this characteristic comes from the breakdown and reformation of the filler network. It is interesting that the curves of either dynamic storage modulus (G′) or loss tangent (tan δ) versus strain amplitude (γ) for the filled rubber can be superposed, respectively, on those for the unfilled one, suggesting that the primary mechanism for the Payne effect is mainly involved in the nature of the entanglement network in rubbery matrix. It is believed there exists a cooperation between the breakdown and reformation of the filler network and the molecular disentanglement, resulting in enhancing the Payne effect and improving the mechanical hysteresis at high strain amplitudes. Moreover, the vertical and the horizontal shift factors for constructing the master curves could be well understood on the basis of the reinforcement factor f(φ) and the strain amplification factor A(φ), respectively. The surface modification of SiO₂ causes a decrease in f(φ), which is ascribed to weakeness of the filler–filler interaction and improvement of the filler dispersion. However, the surface nature of SiO₂ hardly affects A(φ). © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2594‐2602, 2007     

Preparation of dye-loaded SiO2 nanoparticles

A room temperature method for the encapsulation of pyrene in SiO₂ nanoparticles is described. The relation between alkoxysilane surfactant chain length, reactant molar ratios and the uptake of dye, sample morphology, photophysical properties, and the ability of the silicate matrix to protect the encapsulated dye was examined. The synthesis can easily be adapted for the encapsulation of other hydrophobic and thermolabile substances, and used in the development of nanostructured optically active coatings, films and monoliths.     

Synthesis of poly(ethylene oxide) with pending 2,2,6,6‐tetramethylpiperidine‐1‐oxyl groups and its further initiation of the grafting polymerization of styrene

A new stratagem for the synthesis of amphiphilic graft copolymers of hydrophilic poly(ethylene oxide) as the main chain and hydrophobic polystyrene as the side chains is suggested. A poly(ethylene oxide) with pending 2,2,6,6‐tetramethylpiperidine‐1‐oxyls [poly(4‐glycidyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl‐co‐ethylene oxide)] was first prepared by the anionic ring‐opening copolymerization of ethylene oxide and 4‐glycidyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl, and then the graft copolymerization of styrene was completed with benzoyl peroxide as the initiator in the presence of poly(4‐glycidyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl‐co‐ethylene oxide). The polymerization of styrene was under control, and comblike, amphiphilic poly(ethylene oxide)‐g‐polystyrene was obtained. The copolymer and its intermediates were characterized with size exclusion chromatography, ¹H NMR, and electron spin resonance in detail. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3836–3842, 2006     

一步法合成苯乙烯催化剂表面积炭对活性的影响

应用ＥＳＲ，空气气氛下ＤＴＡ，氢气氛下ＴＰＳＲ，ＩＲ等技术手段，对反应后催化剂的积炭行为进行了研究。结果表明，反应后的催化剂表面不同程度地存在着不同类型和积炭，积炭是催化剂失活的主要原因。     

微粉化技术提高水不溶性药物溶解度

药物的微粉化可以改善颗粒的润湿性,进而提高水不溶性药物的溶解度和溶解速率。目前普遍采用的药物微粒化技术主要包括机械研磨、超临界流体过程、低温喷淋和溶剂蒸发沉积过程。本文介绍了这些微粉化制备技术的基本原理以及该类技术的应用进展。     

Studies on the Structure and Properties of Cordierite Synthesized by Talc-Magnesite

Homogeneous cordierite has been synthesized at low cost by talc-magnesite and coal gangue as the main raw materials. The mechanism of synthesizing cordierite under such a com- posing system of raw materials, and the effect of temperature on the crystal cell parameters and microstructure and thermal expansion coefficient of cordierite crystal have been studied via testing methods of XRD, SEM, etc. The result shows that the homogeneous cordierite can be synthesized by the systematic composing materials of “talc-magnesite—coal gangue—talc” with heat pre- servation at 1350 ℃ for 1 h; as the keeping time is prolonged, Al3+ and Mg2+ in cordierite crystal are replaced by a few impurity ions such as Fe3+, Fe2+, etc., and the crystal cell parameters of cordierite present an increase trend; as the high-temperature heat preservation is prolonged, the content of glassy phase in the sample is increased, its density is improved, and its thermal expansion coeffi- cient presents an increase trend.