石墨烯基吸附剂的设计及其对水中抗生素的去除

抗生素的大量使用,所带来的环境污染问题受到广泛关注。吸附法因去除效率高、普遍适用性强,呈现出广阔的应用前景,开发新型吸附剂是高效能吸附处理的关键。近年来石墨烯优良的物理和化学性质以及吸附性能,使其成为重要的抗生素吸附剂。由于石墨烯自身的局限性以及对石墨烯吸附剂处理效能和稳定性的要求,基于石墨烯设计开发了多种石墨烯基吸附材料。而目前基于水体中抗生素的石墨烯基复合材料的设计、合成及其吸附作用机制缺乏相关的系统性综述。本文综述了目前水体中抗生素的危害,针对石墨烯基复合吸附材料中,广泛关注的磁性石墨烯吸附剂、聚合物/石墨烯吸附剂、三维石墨烯凝胶和石墨烯/生物炭吸附剂的设计和制备方法进行了总结和概述,并阐述了石墨烯基吸附材料对水体中抗生素的主要吸附作用机制。最后,本文对石墨烯基吸附材料去除水体中抗生素未来的发展方向进行了展望。     

C_(60)与MoO_3混合材料做空穴注入层的单层有机电致发光器件

我们制备研究了基于结构为氧化铟锡(ITO)/C_(60)(1.2nm):MoO_3(0.4nm)/1,3,5-三(1-苯基-1H-苯并咪唑-2-基)苯(TPBi):三(2-苯基吡啶)铱[Ir(ppy)_3](33%,90 nm)/LiF (0.7 nm)/Al (120 nm)的高效绿色磷光单层有机发光二极管(OLED)。分别将C_(60),MoO_3与C_(60):MoO_3混合物作为空穴注入层(HIL)作为对比。TPBi在发光层中起着主体以及电子传输材料的双重作用。在使用电子传输型主体的单层OLED中,空穴注入层性质对于调节电子/空穴注入以获得电荷载流子传输平衡起重要作用。因此,适当调节空穴注入层是实现高效单层OLED的关键因素。由于MoO_3较大的电子亲和能(6.37 eV)会诱导电子从C_(60)的最高占据分子轨道(HOMO)能级转移至MoO_3,从而形成C_(60)阳离子,并使得Mo元素的价态从+6降至+5,C_(60):MoO_3混合就可以较好的调节空穴注入性质。最终实现最大电流效率为35.88 cd·A~(-1)的单层有机发光器件。     

原位制备的铁配合物催化烯烃选择性环氧化

制备了配体2-(2-吡啶基)-噁唑啉。该含氮配体能够在乙腈溶液中与三氟甲磺酸亚铁和其它辅助配体原位形成具有催化活性的六配位金属亚铁配合物。量子化学计算表明配体上的氮原子而非氧原子与铁配位。研究表明,以H_2O_2为氧化剂,该金属配合物能够在乙腈溶液中高活性地催化末端芳香烯烃和脂肪烯烃的环氧化反应;该反应条件温和、迅速、选择性好并且适用底物范围宽泛。辅助配体、溶剂和氧化剂等因素对反应的活性和选择性影响很敏感,文中对这些影响进行了较详细的研究。     

高分散纳米薄水铝石和纳米氧化铝的制备及其对甲基橙的吸附性能

以硝酸铝为铝源,尿素为沉淀剂,采用无模板水热法合成纳米薄水铝石(γ-AlO(OH))。在不同温度下煅烧后,得到氧化铝产物(γ-Al2O_3和θ-Al2O_3)。利用X射线衍射(XRD)、场发射扫描电子显微镜(FESEM)、透射电子显微镜(TEM)、傅里叶变换红外光谱(FTIR)、氮气吸附-脱附法和紫外-可见分光光度计(UV-Vis)对产物进行了表征分析。并且研究了产物对甲基橙(MO)的吸附性能,系统地考察了吸附时间、溶液的pH值、甲基橙浓度及循环使用对产物吸附性能的影响。此外,还对吸附过程进行了相关吸附理论研究。结果表明:与其他方法所制备的产物相比,通过该方法获得的产物的分散性更高,形态更均匀和完整。产物为高度分散的纳米捆扎状结构。γ-AlO(OH)对甲基橙的最大吸附量达1 492.5 mg·g~(-1)。另外,产物的吸附机制包含化学作用吸附机制和静电作用吸附机制等。3种产物对甲基橙的吸附均符合Langmuir单分子层吸附模型,吸附过程均符合二级动力学特征。     

Sr0.955Al2-xBxSi2O8:0.025Eu2+荧光粉的制备、晶体结构及发光性能

通过高温固相反应在弱还原气氛下制备了Sr_0.955Al_2-xB_xSi₂O₈：0.025Eu²⁺（x=0~0.9）一系列荧光粉,研究了B（Ⅲ）取代基质晶格中的Al（Ⅲ）对荧光粉晶体结构和Eu²⁺发光性能的影响。B（Ⅲ）以类质同相取代基质晶格中Al（Ⅲ）,形成了连续固溶体。随着B（Ⅲ）取代量的增加,荧光粉的晶胞参数（a、b、c）和晶胞体积（V）呈线性递减,而晶胞参数（β）呈线性递增。荧光粉的激发光谱为位于225~400 nm的宽峰,表观峰值位于350 nm,激发峰的半高宽（FWHM）随着B（Ⅲ）取代量的增加,从90 nm减小到102 nm。发射光谱位于370~600 nm的宽峰,可拟合为409和447 nm两个峰,表观峰值位于409 nm。随着B（Ⅲ）取代量的增加,2个拟合峰位均出现蓝移且2个峰强度比呈线性递减。根据试样荧光光谱,通过Van Uitert经验公式计算得出SrAl₂Si₂O₈：Eu²⁺中Sr²⁺的配位数为9。随着B（Ⅲ）取代Al（Ⅲ）进入基质晶格,造成发光中心Eu与配体O距离增加,使得Eu²⁺所处的晶体场强度减小,发光中心Eu²⁺的5d能级分裂减小,造成Eu²⁺最低发射能级重心上移,2个拟合谱峰峰位均呈线性蓝移。     

Highly Sensitive Temperature‐responsive Sensor Based on PS‐PDEA‐PS/C60‐MWCNTs for Reversible Switch Detection of Catechol

A new type of temperature‐responsive electrochemical sensor was constructed based on a glass carbon electrode modified by the composite containing temperature‐responsive polymer polystyrene‐poly N, N‐diethyl acrylamide‐polystyrene (PS‐PDEA‐PS) and fullerenes‐carboxylate multi‐walled carbon nanotubes (C₆₀‐MWCNTs). The sensor was used for the electrochemical detection of catechol (CC). When the temperature is higher than the critical temperature (LCST) of PS‐PDEA‐PS, the electrochemical behavior of CC can be detected, which it is in the “on” state. When the temperature is lower than LCST, the composite modified film is in the “off” state and the electrochemical behavior of CC was not detected. Under the best experimental conditions, the sensor has a good detection range for catechol from 4.0 to 135.0 μM, with a LOD of 1.45 μM. In addition, the proposed sensor has good stability and reproducibility, and was successfully applied to the determination of catechol in real tap water.     

A mussel‐inspired method to fabricate a novel reduced graphene oxide/Bi12O17Cl2 composites membrane for catalytic degradation and oil/water separation

In this study, a novel dopamine modified graphene‐based photocatalytic membrane with Bi₁₂O₁₇Cl₂ inserted was fabricated to modify the commercial cellulose acetate membrane via vacuum filtration method. Results showed the reduced graphene oxide (RGO)/poly(dopamine) (PDA)/Bi₁₂O₁₇Cl₂‐CA photocatalytic composite membrane exhibited 98% removal efficiency for methylene blue (MB) within 100 minutes and 96% removal efficiency for 4‐CP within 160 minutes. Importantly, the photocatalytic composite membrane can simultaneously achieve dye degradation and oil‐water separation in only one device within a short time. And the as‐prepared membrane displayed great antifouling performance and recyclability after 10 cycles. Meanwhile, the membrane showed excellent stability in the agitated water bath or different pH conditions. In summary, the photocatalytic membrane investigated in this study opens new avenue for treatment of wastewater.     

Preparation of stable and superior flux GO/LDH/PDA‐based nanofiltration membranes through electrostatic self‐assembly for dye purification

Graphene oxide (GO) has triggered significant attention as a new type of self‐assembly membrane material. However, the low filtration flux and unstable performance of GO membrane limit its practical application. Hence, in this work, layered double hydroxides (LDHs), as a 2D material with double‐layer channel structure and positive electricity, were self‐assembled with GO at weight ratio of 7:3 by electrostatic interaction. Then, the GO/LDH hybrids combined with polydopamine (PDA) to obtain stable and high‐flux GO‐based membranes through vacuum filtration and the structure and morphology of as‐prepared samples were characterized by FT‐IR, XRD, XPS, and SEM. Furthermore, the separation performance and surface electronegativity of membranes were tested via pure water flux, rejection efficiency, recycle experiments, and zeta potential. Results revealed that the stability and flux of composite membrane were enhanced significantly compared with neat GO‐based membrane. Further, the dye rejection rate of methylene blue (MB) is higher than Congo red (CR) and rhodamine B (Rh B) and reached to 99.8%.     

Carbon-supported Pd-Co nanocatalyst as highly active anodic electrocatalyst for direct borohydride/hydrogen peroxide fuel cells

Journal of Solid State Electrochemistry - Pd/C and Pd-Co/C nanocatalysts are prepared via a simple and environmentally friendly method and are used as anodic catalyst for direct...     

Well-designed hollow and porous Co3O4 microspheres used as an anode for Li-ion battery

Journal of Solid State Electrochemistry - Hollow and porous structures grant fantastic physicochemical properties and widespread application in electrochemical energy storage. Here, hollow/porous...