Direct Synthesis of Oxygenates from Water and Methane via Dielectric-barrier Discharge

In this investigation, a clean, atomic economic and direct synthesis of oxygenates (methanol, ethanol) form water and methane via dielectric-barrier discharge was developed at room temperature and under atmospheric pressure. The effect of discharge voltage on this process was studied. The results showed that the conversion of water can be as high as 7%, the selectivity of methanol and ethanol can be as high as 100%.     

高分子负载加氢催化剂中钯流失的研究——Ⅰ.高分子载体的影响

高分子催化剂由于同时具有多相催化剂和均相催化剂的优点,已引起了广泛的重视.然而表面活性组份贵金属的流失直接影响了此类高活性催化剂的推广应用.作者合成了不同载体的几类负载钯催化剂,探讨其在1,5,9-环十二碳三烯的选择加氢反应过程中钯的流失规律.从改变高分子配位体入手,通过调整聚合物载体的物理性能、配位原     

硅胶负载钯催化剂对丙烯酸甲酯的催化加氢性能研究

本文报导一种新法制备的硅胶负载钯催化剂,其活性组份大部分负载于载体的表面。该催化剂在常温常压下对丙烯酸甲酯的液相加氢反应,即有很高的活性和良好的重复使用性能。 催化剂按下法制备:在圆底烧瓶中加入1.00g硅胶和20mL甲醇,抽真空置换出硅胶孔内的空气,在搅拌下加入一定浓度的吸附质(聚乙烯亚胺、正丙胺、正丁胺等),在25℃反应3—4小时,过滤,固体经甲醇充分洗涤后和一定浓度的氯化钯甲醇溶液反应6小时。过     

吡咯基金属络合物的制备及其在有机合成中的应用

本文综述了近年来吡咯基金属络合物的研究进展, 详细讨论了σ~N-、σ~C-、π-型吡咯基金属络合物的制备方法, 以及各类吡咯基金属络合物在有机合成中的应用。     

A modified simplex method for multifactor optimization of selectivity in gas chromatography

A computer-assisted advanced simplex method is presented for the simultaneous optimization of multifactor ( stationary phase loading, carrier gas flow rate and column temperature ) for separation of ten compounds in gas chromatography. A three factors factorial design was used. The method was based on a special polynomial established from fifteen preliminary runs, using resolution as the selection criterion, with connection to a general simplex method. Excellent agreement is found between the predicted data and the experimental results, and most of experiments required in the general simplex method can be omitted.     

Design,synthesis and biological activity of novel herbicides targeted ALS(Ⅻ)--Quantitative structure-activity relationships of herbicidal l,2,4-triazolo[l,5-a]pyrimidine-2-sulfonanilides

The herbicidal activities of a series of 1,2,4-triazolo[1,5-a]pyrimidine-2-sulfonanilides containing various substituents on the benzene ring were quantitatively analyzed with physicochemi-cal parameters by using Hansch-Fujita method.Variations in the activity were parabolically related to electronic parameters with the optimum pKavalue being about 6.93.The hydrophobic factor in addition to the electronic property seemed to have important effect on the activity.     

Synthesis of a Tweezer—like Bis（Phenylthiapropoxy）calix[4]—arene as a Cation／π Enhanced Sensor for Ion—Selective Electrodes

Two novel 25,27-dihydroxy-26,28-bis(3-phenylthiapropxy)-calix[4]arene(3) and 25,27-dihydroxy-26,28-bis(3-phenylthiapropoxy)-5,11,17,23-tetra-tert-butylcalix[4] arene (4) were synthesized for the evaluation of their ion-selectivity in ion-selective electrodes(ISEs).ISEs based on 3 and 4 as neutral ionophores were prepared,and their selectivity coefficients for Ag^ (lg KAg,M^pot)were investigated against other alkali metal,alkaline-earth metal,aluminum,thallium(Ⅰ）,Lead and some transition metal ions using the separate solution method (SSM).These ISEs showed excellent Ag^ seletivity over most of the interfering cations examined,except for Hg^2 and Fe^2 having relative smaller interference(lg KAg,M^pot≤-2.1).     

Electrochemical Characteristics of Mg0.9Ti0.1-xZrxNi （x=0.02, 0.04, 0.06） Alloys

Mg-based hydrogen storage alloys Mg0.9Ti0.1-xZrxNi (x=0.02, 0.04, 0.06) were successfully prepared by means of mechanical alloying (MA). The effects of Zr addition on the discharge capacity and the cycle performance of the Mg-based electrodes were also studied. It was found that the discharge capacities were improved with addition of a small amount of Zr and the cycle performances of the alloy were stabilized with the addition of Ti. The effects of surface modification or coating on the properties of Mg0.9Ti0.06Zr0.04Ni were also studied. The results indicated that coating with graphite improved both the discharge capacity and cycle life of the amorphous Mg0.9Ti0.06Zr0.04Ni electrode.     

Synthesis of Novel Nucleoside Analog （3R）-2,3-Dideoxy-3-（N-hydroxy-N-methylamino）-L-arabinofuranosyl Uracil

The synthesis of novel nucleoside analog (3R)-2,3-dideoxy-3-(N-hydroxy-N-methylamino)-L-arabinofuranosyl uracil was studied. A twelve-step synthetic route, started from L-ascorbic acid, was designed, and the final product was obtained in 20.8% yield.     

Synthesis and reactivity of 3-(trichlorogermyl)propanoic acid and 3-(triphenylgermyl) propanoic acid

3-(Trichlorogermyl)propanoic acid (la) reacts with phenylmagnesium bromide in malar ratio 1:4 to give 3-(triphenylgermyl)propanoic acid (2a).In the compounds la and 2a theβ-carboxylic functional group shows some unusual properties when they react with excess of phenylmagnesium bromide.The compound la reacts with phenylmagnesium bromide in molar ratio 1:5 to give phenyl 2-(triphenylgermyl)ethylketone (3a) and in molar ratio 1:6 to give l,l-diphenyl-3-(triphenylgermyl)propanol (4a).The compound 2a reacts with phenylmagnesium bromide in molar ratio 1:2 to give 3a and in molar ratio 1:3 to give 4a also.Dehydration of the compound 4a with dilute hydrochloric acid seems especially easy.Moreover,the compound la reacted with phenylmagnsium bromide in molar ratio 1:6,then the mixture was treated with dilute hydrochloric acid to give 1,1-diphenyl-3-(triphenylgermyl)-1-propene (5a) in one pot reaction.Alkyl Ge-C bond in the compound 5a can be cleaved selectively by lithium aluminium hydride ( LiAlH4) in good yiel