液相色谱-串联质谱法同时测定蜂胶中的磺胺及林可胺类药物残留

建立了同时检测蜂胶中16种磺胺及2种林可胺类药物残留的方法,以1.0 mol/L HCl溶液为提取液,经阳离子固相萃取小柱净化富集后,高效液相色谱-串联质谱仪分析。采用Agilent Polaris C18色谱柱(100 mm×2.0 mm,5μm),以甲醇和0.1%甲酸为流动相梯度洗脱,质谱模式为电喷雾正离子监测。该方法前处理简单,分别以13C6-磺胺二甲基嘧啶、13C6-磺胺甲噁唑为磺胺类药物内标、以D3-林可霉素为林可胺类药物内标进行定量,磺胺和林可胺类药物的线性范围均为1.0~50μg/L,相关系数均在0.99以上,方法定量限为10.0μg/kg,在10,20和40μg/kg 3个水平做添加回收,回收率范围为69.5%~114.6%,相对标准偏差小于10%。     

硅铁中硅、铝、磷的联合测定

采用一次称样、熔样,盐酸酸化后蒸至湿盐状,聚乙二醇聚合后过滤,形成残渣和滤下液。残渣用于以比色法测定硅含量,滤下液则用来分别测定铝(分光光度法)和磷(比色法)。该样品处理方式简化了分析步骤,降低了分析成本,硅、铝、磷的加标回收率在98.9%~103%之间,测定结果的相对标准偏差为0.18%~4.52%(n=6),标准样品的测定值与证书值一致。该方法可满足日常分析要求,特别适用于中小型实验室对硅铁样品质量的监控。     

Fabrication of Pascal-triangle Lattice of Proteins by Inducing Ligand Strategy

A protein Pascal triangle has been constructed as new type of supramolecular architecture by using the inducing ligand strategy that we previously developed for protein assemblies. Although mathematical studies on this famous geometry have a long history, no work on such Pascal triangles fabricated from native proteins has been reported so far due to their structural complexity. In this work, by carefully tuning the specific interactions between the native protein building block WGA and the inducing ligand R-SL , a 2D Pascal-triangle lattice with three types of triangular voids has been assembled. Moreover, a 3D crystal structure was obtained based on the 2D Pascal triangles. The distinctive carbohydrate binding sites of WGA and the intralayer as well as interlayer dimerization of RhB was the key to facilitate nanofabrication in solution. This strategy may be applied to prepare and explore various sophisticated assemblies based on native proteins.     

Quantum Dots for Display Applications

This article offers a materials-chemistry perspective for colloidal quantum dots (QDs) in the field of display, including QD-enhanced liquid-crystal-display (QD-LCD) and QD-based light-emitting-diodes (QLEDs) display. The rapid successes of QDs for display in the past five years are not accidental but have a deep root in both maturity of their synthetic chemistry and their unique chemical, optical, and optoelectronic properties. This article intends to discuss the natural match of QD emitters for display and chemical means to eventually bring about their full potential.     

Chromophore-Assisted Proximity Labeling of DNA Reveals Chromosomal Organization in Living Cells

The spatial arrangement of chromosome within the nucleus is linked to genome function and gene expression regulation. Existing genome-wide mapping methods often rely on chemically crosslinking DNA with protein baits, which raises concerns of artifacts being introduced during cell fixation. By genetically targeting a photosensitizer protein to specific subnuclear locations, we achieved blue-light-activated labeling of local DNA with a bioorthogonal functional handle for affinity purification and sequence identification through next-generation sequencing. When applied to the nuclear lamina in human embryonic kidney 293T cells, it revealed lamina-associated domains (LADs) that cover 37.6 % of the genome. These LADs overlap with heterochromatin hallmarks and are depleted with CpG islands. This simple labeling method avoids the harsh treatment of chemical crosslinking and is generally applicable to the genome-wide high-resolution mapping of the spatial chromosome organization in living cells.     

A Non-Conjugated Polymer Acceptor for Efficient and Thermally Stable All-Polymer Solar Cells

A non-conjugated polymer acceptor PF1-TS4 was firstly synthesized by embedding a thioalkyl segment in the mainchain, which shows excellent photophysical properties on par with a fully conjugated polymer, with a low optical band gap of 1.58 eV and a high absorption coefficient >10⁵ cm⁻¹, a high LUMO level of −3.89 eV, and suitable crystallinity. Matched with the polymer donor PM6, the PF1-TS4-based all-PSC achieved a power conversion efficiency (PCE) of 8.63 %, which is ≈45 % higher than that of a device based on the small molecule acceptor counterpart IDIC16. Moreover, the PF1-TS4-based all-PSC has good thermal stability with ≈70 % of its initial PCE retained after being stored at 85 °C for 180 h, while the IDIC16-based device only retained ≈50 % of its initial PCE when stored at 85 °C for only 18 h. Our work provides a new strategy to develop efficient polymer acceptor materials by linkage of conjugated units with non-conjugated thioalkyl segments.     

Fe3O4(001)-B表面水煤气变换反应机理第一性原理研究

采用自旋极化的密度泛函理论方法系统地研究了Fe_3O_4(001)-B表面水煤气变换的反应机理,计算了整个反应历程。结果表明,对于Fe_3O_4(001)-B表面上的水煤气变换反应,氧化还原、联合和再生三种反应路径共存,但氧化还原和联合机理的有效能垒较低,因而更占优势。对于生成H_2的基元反应,其活性受表面H浓度和催化剂表面O缺陷浓度影响;较高的表面H浓度和O缺陷浓度均有利于H_2生成。这些结果有助于进一步认识铁氧催化剂上的水煤气变换反应机理。     

The inhibition profiles of 4'-acylpyrrole–5-fluoroindolin-2-ones with a C-3' side chain for VEGFR2, PDGFR-β, and FGFR-1 protein kinases

In this study, we reported the inhibition profiles of 4′-acylpyrrole–5-fluoroindolin-2-one 3 with a C-3′ side chain for VEGFR2, PDGFR-β, and FGFR-1 protein kinases. The pyrrole-fused cyclohexanone moiety provided 3 with the best potency to inhibit the three kinases, and the C-3′ side chains contributed to the different inhibition profiles of 3 . Compound 3b with a C-3′ 2-carboxylethyl side chain showed good potency for the three kinase (IC₅₀: 25–260 nM), and compound 3g with a N,N-dialkyl-2-carbamoylethyl side chain was more active for VEGFR2 (IC₅₀: 59 nM) and PDGFR-β (IC₅₀: 16 nM) than FGFR-1 (IC₅₀: 1.7 μM). The C-3′ 3-(dialkylamino)propyl side chain accomplished 3h – j as selective PDGFR-β inhibitors (IC₅₀: 7.8–13 nM). Compound 3b was further investigated and found potent to inhibit VEGF- and FGF-dependent cell proliferation with moderate in vivo anticancer activity. Results from docking simulations revealed that the interactions of 3b with VEGFR2 and FGFR-1 which could account for the different inhibition profiles of 3 .     

Efficient and Stable Thin-Film Luminescent Solar Concentrators Enabled by Near-Infrared Emission Perovskite Nanocrystals

A novel triphenylphosphine (TPP) treatment strategy was developed to prepare the near-infrared emission CsPbI₃ nanocrystal (NC)-polymer composite thin-film luminescent solar concentrators (LSCs) featuring high absolute photoluminescence quantum yield (PLQY), low reabsorption, and high stability. The PL emission of the LSCs is centered at about 700 nm with 99.4±0.4 % PLQY and narrow full width at half maximum (FWHM) of 75 meV (30 nm). Compared with LSCs prepared with classic CsPbI₃ NCs, the stability of the LSCs after TPP treatments has been greatly improved, even after long-term (30 days) immersion in water and strong mercury-lamp irradiation (50 mW cm⁻²). Owing to the presence of lone-pair electrons on the phosphorus atom, TPP is also used as a photoinitiator, with higher efficiency than other common photoinitiators. Large-area (ca. 75 cm²) infrared LSCs were achieved with a high optical conversion efficiency of 3.1 % at a geometric factor of 10.     

Photoswitchable Sol–Gel Transitions and Catalysis Mediated by Polymer Networks with Coumarin-Decorated Cu24L24 Metal–Organic Cages as Junctions

Photoresponsive materials that change in response to light have been studied for a range of applications. These materials are often metastable during irradiation, returning to their pre-irradiated state after removal of the light source. Herein, we report a polymer gel comprising poly(ethylene glycol) star polymers linked by Cu₂₄L₂₄ metal–organic cages/polyhedra (MOCs) with coumarin ligands. In the presence of UV light, a photosensitizer, and a hydrogen donor, this “polyMOC” material can be reversibly switched between Cu^II, Cu^I, and Cu⁰. The instability of the MOC junctions in the Cu^I and Cu⁰ states leads to network disassembly, forming Cu^I/Cu⁰ solutions, respectively, that are stable until re-oxidation to Cu^II and supramolecular gelation. This reversible disassembly of the polyMOC network can occur in the presence of a fixed covalent second network generated in situ by copper-catalyzed azide-alkyne cycloaddition (CuAAC), providing interpenetrating supramolecular and covalent networks.