2,3,7,8,12,13‐Hexaaryltruxenes: An ortho‐Substituted Multiarm Design and Microwave‐Accelerated Synthesis toward Starburst Macromolecular Materials with Well‐Defined π Delocalization

We present herein a novel design and the efficient synthesis towards a “homogeneous” starburst fluorene system based on the novel 2,3,7,8,12,13‐hexaaryltruxene scaffold. Controlled microwave heating provides a facile and powerful approach for each step in the synthesis of these bulky materials with large steric hindrance, suggesting an avenue to access structurally well‐defined complex organic semiconductors (OSCs) rapidly and conveniently with high yield and purity. The resulting materials exhibited good thermal stability and an excellent glassy structure as revealed by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) as well as wide‐angle X‐ray diffraction (WAXD) studies. Moreover, compared with their corresponding three‐arm‐substituted counterparts T1 – T4 , the introduction of the ortho substituents around the truxene core in Tr1 – Tr4 results in significant blueshifts (of 7–24 nm) of the absorption maxima λ_max and higher energy optical gaps (E_g). Comparative studies with corresponding linear, rod‐shaped oligofluorene counterparts (OFX) have revealed that the longest para‐conjugated segment in the TrX (X=1–4) structures plays the dominant role in determining their electronic properties. UV/Vis data and cyclic voltammetry (CV) investigations have indicated that there is little electronic interaction between the arms, even for the shortest armed oligomer Tr1 . A clear linear relationship of both 1/λ_max and E_g with the inverse of (n+1) for these branched systems was found. Our findings highlight a novel molecular design comprising an ortho‐substituted, multiarmed architecture that would allow the introduction of isotropic physical and/or mechanical properties, while at the same time maintaining most of the important electronic properties of the rod‐shaped constituents of a fully conjugated system.     

分光光度法测定水溶液中的有机酸含量

利用水溶液中的有机酸在高氯酸羟胺(HAP)和N,N′-二环己基碳酰亚胺(DCC)存在的条件下生成的羟肟酸,以及羟肟酸在酸性高氯酸铁溶液中显色的性质,建立了一种分光光度测定水中有机酸含量的方法。对显色剂的酸度、浓度、加入体积、HAP和DCC的浓度、加入体积以及显色反应的温度、反应时间对吸光度的影响进行了考察。结果表明,该显色反应在反应条件:0.0687mol/LHAP1.0mL、0.6mol/LDCC0.5mL、震荡均匀后室温下放置反应15min、0.02mol/L酸性高氯酸铁溶液(高氯酸浓度0.3mol/L)显色条件下具有最大的吸光度;并对正丁酸、正戊酸、苯甲酸进行了线性关系考察。结果表明,该检测方法具有仪器简单、操作方便、线性范围较宽、准确度高等优点,可用于那些不易从水溶液中萃取的有机酸的测定,也可用于液相色谱洗脱液中有机酸的测定。     

纤维素纳米晶体手性复合材料:结构色的调控与应用

结构色在自然界中扮演了重要的角色,在昆虫外骨骼、鸟类羽毛以及植物果实中广泛分布.纤维素纳米晶体(CNCs)的水悬浮液达到一定浓度时会自组装形成左旋的手性向列液晶结构,这种手性向列结构在水分挥发后仍能保持并形成光子晶体虹彩薄膜,具有极强的手性和光子晶体的双重性质.膜内的周期性层状结构与光线产生干涉、衍射作用,表现出复杂的...     

圆管流动水击压力波测量及水力计算

为探索水击现象的物理过程和机理,研制了自循环定常流动管路瞬态特性计算机控制试验装置,并利用该装置进行圆管流动水击压力波实验测量。用12只扩散硅压力传感器测定圆管流动水击压力波瞬态分布及最大、最小压力值,由试验数据拟合出水击波波形,揭示了水击压力波传播方式、特性及衰减规律。通过分析随机捕捉测量技术方法,理论上推断出测量数据达到可信精度。在归纳分析试验数据基础上,得出最大压力随关阀时间的关系曲线,对圆管流动直接水击等概念进行了探讨,用数值分析方法拟合出水击最大压力水力计算修正方程式。     

Application of SPE Using Multi-Walled Carbon Nanotubes as Adsorbent and Rapid Resolution LC-MS-MS for the Simultaneous Determination of 11 Triazine Herbicides Residues in River Water

A method for the simultaneous determination of 11 triazine herbicides residues in river water has been developed. It involves solid-phase extraction (SPE) pretreatment step and rapid resolution liquid chromatography-tandem mass spectrometry (RRLC-MS-MS). In the SPE pretreatment step, the adsorptive performance of MWCNTs material as SPE adsorbent and the elution capability of five kinds of solvents were investigated; in the LC separation step, a rapid resolution high throughput LC column, was used and the gradient elution mode adopted. The linear correlation coefficients (r ²) of the method for 11 target analytes varied between 0.9930 and 0.9980, the mean recoveries were in the range of 73.0 and 98.0% with relative standard deviations (RSD) 2.6 ~ 4.2%, the method detection limits (MDL) were all below 0.1 ng L^?1. An expanded uncertainty of not more than 20% was estimated for each analyte at the spiked concentration of 4.0 μg L^?1. The proposed method was applied to the determination of the residue concentrations of 11 pollutants in Songhuajiang River water.     

Au nanoparticles as a novel coating for solid-phase microextraction

A novel solid-phase microextraction fiber based on a stainless steel wire coated with Au nanoparticles was prepared and has been applied, coupled with gas chromatography, to the extraction of aromatic hydrophobic organic chemical pollutants in rainwater and soil extract. The solid-phase microextraction fiber exhibited excellent extraction efficiency and selectivity. Effects of extraction time, extraction temperature, ionic strength, stirring rate and desorption conditions were investigated and optimized. Single fiber repeatability and fiber-to-fiber reproducibility were less than 7.90% and 26.40%, respectively. The calibration curves were linear in a wide range for all analytes. Correlation coefficients ranged from 0.9941 to 0.9993. The as-established SPME-GC method was used successfully to two real natural samples. Recovery of analytes spiked at 10 μg L(-1) and 100 μg L(-1) ranged from 78.4% to 119.9% and the relative standard deviations were less than 11.3%.     

HPLC-MS-MS法测定水体中残留的氨基甲酸酯类农药

应用高效液相色谱-串联质谱(HPLC-MS-MS)联用技术,建立了检测水体中氨基甲酸酯类农药残留的方法。水样经氨基柱固相萃取,二氯甲烷洗脱,梯度流动相洗脱,电喷雾正离子(ESI+)模式采集、选择反应性监测模式(SRM)对定性、定量离子进行MS/MS测定。5种氨基甲酸酯类农药在5～200ng/L范围内线性关系良好,回收率为80%～92%,相对标准偏差均小于10%,方法检出限分别为:异丙威和仲丁威为1.4ng/L,克百威和甲萘威为1.5ng/L,恶虫威为1.6ng/L。该方法适用于水体中氨基甲酸酯类农药残留的检测。     

CdTe量子点荧光法测定阳离子表面活性剂

合成了巯基乙酸(TGA)保护的水溶性发光CdTe量子点,并考察了此探针在阳离子表面活性剂十六烷基三甲基溴化铵(CTMAB)中的发光行为。根据观察到的发光猝灭效应,建立了一种简单的测定阳离子表面活性剂的方法。考察了CdTe量子点的浓度、体系酸度、反应时间及共存物质等对测定的影响。在最佳条件下,CdTe量子点发光强度与CTMAB的浓度分别在6×10-7~9.0×10-6mol/L和1.2×10-5~3.8×10-5mol/L范围内分段成线性关系。该方法用于水样的阳离子表面活性剂的测定,回收率为97%~102%。     

掺杂Sm_2O_3对Y-ZrO_2陶瓷烧结行为和性能的影响

一定量的Sm2O3粉末与3%Y2O3(摩尔分数)稳定的四方ZrO2粉体(Y-ZrO2)经球磨混合、造粒后,在钢模中压制成形,所得压坯在1450~1600℃下烧结后,得到不同Sm2O3掺杂量的Sm2O3掺杂Y-ZrO2(SY-ZrO2)陶瓷烧结体。对不同温度下烧结所得烧结体试样的相组成、密度、电导率、硬度以及抗弯强度等性能进行了测试分析。实验结果表明:将适量的Sm2O3掺入Y-ZrO2中,可以获得具有立方结构的SY-ZrO2陶瓷烧结体,且其密度、硬度和抗弯强度与Sm2O3的掺杂量有关;Sm2O3的加入提高了Y-ZrO2陶瓷的电导率,掺杂0.5%Sm2O3的SY-ZrO2陶瓷800℃时在空气中的离子电导率可达0.02 S.cm-1。本试验的初步实验结果显示,采用二元稀土氧化物(Sm2O3和Y2O3)复合掺杂ZrO2陶瓷材料,可以在保持其良好力学性能的同时,提高其电导率,拓展其应用领域。     

铈、钇在AZ91D镁合金中的存在形式及其作用

在AZ91D镁合金中添加稀土元素Ce和Y,研究了Ce,Y元素在铸态AZ91D镁合金中的存在形式以及对合金组织和性能的影响。结果表明,铸态AZ91D镁合金中加入的Ce,Y大部分形成Al4Ce和Al2Y化合物,少量剩余的Ce,Y部分取代Mg元素的位置,以代位固溶的形式固溶在α-Mg固溶体和β-Mg17Al12金属间化合物中;Ce,Y能够细化镁合金铸态组织的晶粒,使Mg17Al12相发生"断网"并减少其在组织中的相对比例;适量添加Ce,Y能够提高AZ91D镁合金铸态机械性能,其主要原因是Ce,Y的细晶作用、固溶强化作用、Al-RE相的第二相强化作用以及对Mg17Al12相强化作用的改善。