聚合物系统中的传能和光化学

评论了聚合物系统中非辐射能量传递类型,影响能量传递的因素,以及能量传递同聚合物光化学的关系,附22篇文献。     

Activation of Carbon Dioxide and Synthesis of Propylene Carbonate

Cycloaddition of carbon dioxdie and propylene oxide to propylene carbonate catalyzed by tetra-tert-butyl metal phthalocyanine in the presence of tributylamine(TBA) shows higher yield than catalyzed by unsubstituted metal phthalocyanine.Comparing different catalysts of diverse metals,(t-Bu)4PcMg is more active than (t-Bu)PcFe ,But(t-Bu)4PcCo and (t-Bu)4PcNi only have low catalytic activities towards the reaction.Moreover,the yield will increase as the temperature increases.     

玻璃基质微流控芯片用于DNA片段的分离和C677T基因突变的快速检测

基于微加工方法,在一般实验条件下,成功地制备了玻璃芯片。利用水溶性聚合物对玻璃通道进行动态修饰,从而抑制了DNA分子的吸附作用,并成功地用于DNA片段的分离和四氢叶酸还原酶基因(MTHFR)中C677T的突变检测。     

壳聚糖溶液pH对载细胞海藻酸钠-壳聚糖微胶囊性能的影响

以激光共聚焦扫描显微镜为研究手段, 原位直观地考察了在不同pH条件下聚电解质膜的络合程度和蛋白扩散情况. 通过分析pH值对微胶囊膜性能的影响规律, 并结合不同种类细胞对环境pH的敏感特性, 确定了制备细胞培养用海藻酸钠-壳聚糖微胶囊的最佳pH值. 结果表明, 当壳聚糖溶液的pH值由3.50增加到6.50, 微胶囊膜的络合深度呈现高-低-高的趋势, 而微胶囊膜的膨胀性能呈现低-高-低的趋势, 模型蛋白通过微囊膜的扩散呈现低-高-低的趋势, 拐点均出现在pH=4.00和5.50处. 结合动物细胞及微生物细胞对环境pH耐受能力的考察, 确定制备微囊化动物细胞时, 微胶囊成膜反应溶液的最佳pH值为5.50; 制备微囊化大肠杆菌时, 反应溶液的最佳pH值为5.00; 制备微囊化酵母菌时, 反应溶液的最佳pH值为4.50.     

苯丙水溶胶的合成与性能研究(I) 聚合工艺和反应组分对聚合稳定性和胶体性能的影响

用一次投料法、半连续滴加法和单体预乳化法三种聚合工艺，合成了苯丙乳液聚合物，并加氨微细化，转化成水溶胶，考察了聚合工艺和反应组分（乳化剂，功能单体等）对苯丙乳液及其水溶胶反应稳定性和粒子大小及分布等胶体性能的影响。     

ELECTROCHROMETIC STUDIES ON POLAR MULTILAYERS OF LIQUID CRYSTALLINE POLYMERS

Electrochrometic measurements were carried on the Z-type Langmuir-Blodgett films oftwo liquid crystalline polymers: mono-{6-[4-(phenylazo) naphthyloxy] hexyl} (1a) andmono-{6-[4-(anthraquinone-1-azo) naphthyloxy] hexyl} (2a) ester of polymaleic acid. Itwas found that for both polymers, poling fields parallel and antiparalle1 to dipole momentsof the polymer side chains induce red and blue shift in absorption bands, respectively. Forpolymer la blue shift is accompanied by absorbance increase, while red shift by absorbancedecrease;but for polymer 2a only decrease in absorbance is observed. A simple model wasproposed to analyze the results.     

Imidazole Coordinated Sandwich-type Antimony Polyoxotungstates Na9[ {Na（H=O2}3{M（C3H4N2）}3（ Sb W9O33）2]·xH=O（M=Ni^Ⅱ, Co^Ⅱ, Zn^Ⅱ, Mn^Ⅱ）

The imidazole covalently coordinated sandwich-type heteropolymngstates Na9[ {Na（H=O2}3{M（C3H4N2）}3（ Sb W9O33）2]·xH=O（M=Ni^Ⅱ, Co^Ⅱ, Zn^Ⅱ, Mn^Ⅱ） were obtained by the reaction of Na2WO4·2H2O, SbCl3·6H2O, NiCl2·6H2O [MnSO4·H2O, Co（NO3）2·6H2O, ZnSO4·7H2O] and imidazole at pH≈7.5. The structure of Na9[{Na（H2O）2}3{Ni（C3H4N2）}3（SbW9O33）2]·32H2O was determined by single crystal X-ray diffraction. Polyanion [{Na（H2O）2}3{Ni（C3H4N2）}3（SbW9O33）2}3]^9- has approximate C3v symmetry, imidazole coordinated six-nuclear duster [{Na（H2O）2}3{Ni（C3H4N2）}3]^9＋ is encapsulated between two （α-SbW9O33）^9-, the three rings of imidazole in the polyanion are perpendicular to the horizontal plane formed by six metals （Na-Ni-Na-Ni-Na-Ni） in the central belt, and x-stacking interactions exist between imidazoles of neighboring polyanions with dihedral angel of 60%. The compounds were also characterized by IR, UV-Vis spectra, TG and DSC, and the thermal decomposition mechanism of the four compounds was suggested by TG curves.     

C_(74)的结构、电子光谱及三阶线性光学性质的理论研究

用密度泛函（DFT）方法（BLYP/3－21G~*）研究了C_(74)的稳定几何构型。用 ZINDO及ab initio GIS两种方法对C_(74)的电子光谱进行了计算，预测C_(74)在红 外区域有光谱吸收。计算了C_(74)的三阶非线性光学系数<γ>为1.483 * 10~(-32) esu，它比C_(60)的<γ>（8.84 * 10~(-34) esu）要大得多。预测C_(74)亦将是 一种有很好应用前景的磁性材料。     

二甲胺修饰戊二醛交联壳聚糖树脂的制备及性能

研究了在均匀水相介质条件下，采用戊二醛稀溶液制备交联壳聚糖树脂的方法，并以三聚氯氰为活化剂，合成了二甲胺修饰戊二醛交联壳聚糖树脂．研究了该树脂的红外光谱及吸附性能．该树脂对铜(Ⅱ)和牛血清白蛋白(BSA)的吸附容量分别为42mg／g(干)和940mg／g(干)，其吸附行为均符合Freundlich等温吸附模型．该树脂制备工艺简单，机械强度较好，可作为金属离子或蛋白质分离纯化的吸附剂和色谱填料．     

化学镀法制备银壳聚苯乙烯微球

采用一种新的化学镀法合成银壳包覆聚苯乙烯微球, 通过三乙醇胺和银离子络合来减小反应的氧化还原电位差, 降低银在改性聚苯乙烯微球表面的沉积速率. 采用TEM、XRD、UV 等测试手段对样品进行了分析和表征, 并考察了不同反应条件对实验结果的影响.实验表明, 该方法可在改性聚苯乙烯微球上包覆均匀的银层.