Synthesis and properties of noncoplanar rigid‐rod aromatic polyhydrazides and poly(1,3,4‐oxadiazole)s containing phenyl or naphthyl substituents

Two new phenyl‐ and naphthyl‐substituted rigid‐rod aromatic dicarboxylic acid monomers, 2,2′‐diphenylbiphenyl‐4,4′‐dicarboxylic acid ( 4 ) and 2,2′‐di(1‐naphthyl)biphenyl‐4,4′‐dicarboxylic acid ( 5 ), were synthesized by the Suzuki coupling reaction of 2,2′‐diiodobiphenyl‐4,4′‐dicarboxylic acid dimethyl ester with benzeneboronic acid and naphthaleneboronic acid, respectively, followed by alkaline hydrolysis of the ester groups. Four new polyhydrazides were prepared from the dicarboxylic acids 4 and 5 with terephthalic dihydrazide (TPH) and isophthalic dihydrazide (IPH), respectively, via the Yamazaki phosphorylation reaction. These polyhydrazides were amorphous and readily soluble in many organic solvents. Differential scanning calorimetry (DSC) indicated that these hydrazide polymers had glass transition temperatures in the range of 187–234 °C and could be thermally cyclodehydrated into the corresponding oxadiazole polymers in the range of 300–400 °C. The resulting poly(1,3,4‐oxadiazole)s exhibited T_g's in the range of 252–283 °C, 10% weight‐loss temperature in excess of 470 °C, and char yield at 800 °C in nitrogen higher than 54%. These organo‐soluble polyhydrazides and poly(1,3,4‐oxadiazole)s exhibited UV–Vis absorption maximum at 262–296 and 264–342 nm in NMP solution, and their photoluminescence spectra showed maximum bands around 414–445 and 404–453 nm, respectively, with quantum yield up to 38%. The electron‐transporting properties were examined by electrochemical methods. Cyclic voltammograms of the poly(1,3,4‐oxadiazole) films cast onto an indium‐tin oxide (ITO)‐coated glass substrate exhibited reversible reduction redox with E_onset at ?1.37 to ?1.57 V versus Ag/AgCl in dry N,N‐dimethylformamide solution. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6466–6483, 2006     

Effect of the pore surface modification of an inorganic substrate on the plasma‐grafting behavior of pore‐filling‐type organic/inorganic composite membranes

We have investigated the effect of the surface state and surface treatment of the pores of an inorganic substrate on the plasma‐grafting behavior of pore‐filling‐type organic/inorganic composite membranes. Shirasu porous glass (SPG) was used as the inorganic substrate, and methyl acrylate was used as the grafting monomer. The grafting rate increased as the density of silanol on the SPG substrate increased. This result suggests that radicals are generated mainly at the silanol groups on the pore surface by plasma irradiation. The SPG substrates were treated with silane coupling agents used to control the mass of organic material bonded to the pore surface. The thickness of the grafted layer became thinner as the mass of organic material bonded to the pore surface of SPG increased. This decrease in the thickness of the grafted layer could be explained by the decrease in the penetration depth of vacuum ultraviolet rays contained in plasma having a wavelength of less than 160 nm that generated radicals in the pores of the substrate. The thickness of the grafted layer inside the SPG substrates could be controlled through the control of the mass of organic material bonded to the pore surface of the SPG substrate. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 846–856, 2006     

Highly substituted poly(2,3‐diphenyl‐1,4‐phenylenevinylene) derivatives having bulky phenyl and fluorenyl pendant groups: Synthesis,characterization, and electro‐optical properties

Two series of poly(2,3‐diphenyl‐1,4‐phenylenevinylene) (DP‐PPV) derivatives containing multiple bulky substituents were synthesized. In the first series, two different groups were incorporated on C‐5,6 positions of the phenylene moiety to increase steric hindrance and to obtain blue‐shifted emissions. In the second series, bulky fluorenyl groups with two hexyl chains on the C‐9 position were introduced on two phenyl pendants to increase the solubility as well as steric hindrance to prevent close packing of the main chain. Polymers with high molecular weights and fine‐tuned electro‐optical properties were obtained by controlling the feed ratio of different monomers during polymerization. The maximum photoluminescent emissions of the thin films are located between 384 and 541 nm. Cyclic voltammetric analysis reveals that the band gaps of these light‐emitting materials are in the range from 2.4 to 3.3 eV. A double‐layer EL device with the configuration of ITO/PEDOT/P4/Ca/Al emitted pure green light with CIE′1931 at (0.24, 0.5). Using copolymer P6 as the emissive layer, the maximum luminescence and current efficiency were both improved when compared with the homopolymer P4. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6738–6749, 2006     

Method for vessel attitude estimation by spatial correlation function for bottom reverberation

Under the assumption that the sea bottom is an almost-flat and randomly rough thin layer, a spatial correlation model for bottom reverberation is constructed. At high signal noise ratio, the phase of the spatial correlation function is the product of sound wave number and the vertical vector between two hydrophones. In a nominally horizontal plane, roll and pitch bring on the vertical vector between the hydrophones. Then an equation including roll, pitch and the phase of the spatial correlation function is found. If a parallelogram can be constructed by 3 hydrophones and the rat ios of its acreage to diagonals are not smaller than half of the wavelength, roll and pitch can be obtained analytically or by optimal method. However, the ranges of roll and pitch are restricted because of the phase ambiguity. Using Fisher information matrix, the Cramer-Rao lower bound is obtained. Results from computer simulation and sea test data prove the feasibility of the method.     

40,48Ca+90,96Zr融合反应的动力学模型研究

应用改进的量子分子动力学模型,在严格挑选初始核考虑弹靶结构效应的基础上,研究了近垒和垒上融合反应^40,48Ca+^90,96Zr. 研究表明: 4个反应的理论计算截面与实验值很好符合; 丰中子反应⁴⁰Ca+⁹⁶Zr的垒下融合截面比其他3个反应有明显增强的现象.为了理解丰中子反应⁴⁰Ca+⁹⁶Zr与⁴⁰Ca+⁹⁰Zr相比垒下融合截面增强,而Ca+⁹⁶Zr垒下融合截面没有明显增强的原因, 进一步分析了484个反应的融合位垒,中子转移与融合位垒的关系、中子转移与Q值的关系,结果表明: 正反应Q值会引起核子(特别是中子)转移的增强,从而导致动力学融合位垒的下降和垒下融合截面增强.     

气-固流化床反应器内双流体力学模型及其验证 Ⅱ.单组分两维射流床内流场特性分析

由以质量、动量和能量三大守恒定律为基础的湍流两相流理论出发,建立了描述气固流化床内两相流动的数学模型;在微型计算机上编写了相应的数值计算和图形处理程序;为了验证模型的可靠性,本文着手模拟与分析了单组分颗粒体系两维射流流化床内气、固相速度场、空隙度和压力场随时间、空间变化规律;得到了与前人实验结果相吻合的结论。     

过硫酸铵水溶液对聚乙烯表面作用的研究

本文利用X光电子能谱(XPS)及其它技术对过硫酸铵水溶液处理聚乙烯表面改进粘合性的作用机理进行了研究。结果表明,过硫酸铵的氧化作用使聚乙烯表面引入酮、醛、羧基等含氧基团,使其粘合强度显著提高。高密度聚乙烯表面的氧化深度小于40,低密度聚乙烯的均匀氧化深度在40—90之间。处理后的聚乙烯表面未发现明显的交联产物。     

A Two-dimensional Lanthanide Coordination Framework with a New Amide-type Tripodal Ligand, 2,2′,2＂-Nitrilotris{[（2′- benzylaminoformyl）phenoxy]ethyl}amine

The La(III) complex with a new amide‐type tripodal ligand,2,2′.2″‐nitrilotris{[(2′‐benzylaminofomyl)‐phenoxylethyl)amine (L), was synthesized and characterized by X‐ray crystallographic analysis. Crystal data: C₄₈H_55.50LaN₇O_18.75, M_r=1169.40, monoclinic. space group, P2₁/n, a= 1.0644(3) nm. b=2.3889(5) nm, c= 2.1917(5) nm, β=90.65°, V=5.573(2) nm³, Z=1, D_c=1.394 g°cm^?3, R₁=0.0487, wR [1>2s?(I)]=0.1266. The results reveal that each La(III) ion binds to 9 oxygen atoms, three of which belong to carbonyl groups from three tripodal ligands and six to three bidentate nitrate groups and a two‐dimensional sheet of 4.8² networks is assembled by metal‐ligand coordination interaction. L, a heptadentate compound, merely acts as a tridentate bridging spacer due to its steric hindrance and links the La(III) ions as three‐connected nodes.     

1-烃基-1-硅杂环丁烷的合成及其Si—H键伸缩振动频率与结构关系的研究

硅杂环丁烷在有机硅化学中是一类非常重要的小分子环系化合物。由于硅杂环丁烷和环丁烷的环张力相似,因而显示出较高的反应活性。例如能与某些试剂作用,生成开环产物;在光解或热解条件下,产生具有Si=C结构的高活性中间体,可用以合成多种有机硅化合物。     

Cl/Ag体系研究 Ⅱ.Cl吸附引起的表面结构变化

运用LEED,UPS和HREELS等表面技术研究了氯吸附至(c)阶段的Ag(111)表面结构.结果表明,表面上有三维的AgCl(111)生成,其生长按修正的Stranski-Krastanov模式进行.伴随着AgCI(111)生长的同时,表面上产生缺陷.这种缺陷只有在氯吸附至(c)阶段时表面上形成三维AgCI的过程中才能产生,它一旦在表面上形成后,表面上氯的存在与否对其不产生影响.本文提出了一个(c)阶段时的Cl/Ag(111)体系的结构模型.