铽(Ⅲ)的邻香兰素二胺类双希夫碱配合物的合成和表征

本文首次合成了邻香兰素(2-羟基-3-甲氧基苯甲醛)与乙二胺、联苯胺、对苯二胺缩合而成的双希夫碱(分别以L~1、L~2、L~3表示)的铽(Ⅲ)配合物。用元素分析、红外光谱、摩尔电导、X-射线粉末衍射物相分析、X-射线光电子能谱、差热及热重分析近代物理化学测试手段,确定了这些配合物的组成和键合情况,并对其结构和某些物理化学性质进行了研究。     

4-酰基-双(1,3-二苯基-5-吡唑啉酮)铽(Ⅲ)配合物的和成及荧光性质

合成了3种4－酰基－双（1，3－二苯基－5－吡唑啉酮），1，5－双（1′，3′－二苯基－5′－吡唑啉酮－4′－基）－1，5－戊二酮；1，6－双（1′，3′－二苯基－5′－吡唑啉酮－4′－基）－1，6－己二酮和1，10－双（1′，3′－二苯基－5′－吡唑啉酮－4′－基）－1，10－癸二酮，通过元素分析，红外光谱和核磁共振氢谱对产物组成进行了表征，合成了它们的Tb(Ⅲ）二元和三元[1,10-二氮杂菲（Phen)或2，2′－联吡啶（Dipy)]配合物，测定了配合物的荧光光谱，对其荧光性质进行了研究，结果表明，配合物发射Tb(Ⅲ）的特征荧光，4－酰基0双（1，3－二苯基－5－吡唑啉酮）配体的三重态能级与Tb(Ⅲ）的最低激发态（5D4）能级匹配较好，配合物荧光强度随4－酰基－双（1，3－二苯基－5－吡唑啉酮）配体2个吡唑环间碳链的增长而减弱，第2配体Phen和Dipy具有荧光增强作用，且前者优于后者。′     

The application of isotope dilution thermal ionization mass spectrometry to traceability of chemical measurement and interlaboratory comparisons

In this work, the method of isotope dilution thermal ionization mass spectrometry able to trace to SI was developed to accurately measure trace amount of Cd, Pb, Zn and Cu in sediment, rice, wine, and human serum samples for interlaboratory comparisons. The research focuses on how to apply the primary method correctly, uncertainty evaluation of measurement results, and how to achieve the meaning of traceability to SI by using ID-TIMS. As a result, the measurement results of Cu and Zn in the human serum 1 and 2 with 0.94, 0.83 and 0.49% combined uncertainty, respectively, were accepted by EC-JRC-IRMM as the certified values of the serum samples. The measurement results of Cd and Pb in CCQM-K13 and CCQM-K24 with 3.96, 1.62 and 1.03% combined uncertainty, respectively, are within the degrees of the equivalence. These comparisons at the highest level of measurement are proof that traceability of chemical measurement can be achieved as the traceability chain of ID-TIMS established in this work was used.     

一种新颖的六帽Keggin型钼钒砷酸盐——(H3O)3[AsMo12O40(VO)6]·6H2O的水热合成和晶体结构

近年来,含有Keggin结构的杂多酸以其优异的结构可修饰性及其在催化、功能材料和医药等方面的潜在应用而引起人们广泛的研究兴趣.在这一领域中,众多过渡金属取代的Keggin型杂多化合物,尤其是含有钒和铝的多金属氧酸盐由于其独特的电磁特性及结构特点而倍受关注.但迄今为止,只有少数带帽Keggin型结构的杂多阴离子被报道.这些Keggin阴离子通常具有低的V/Mo.     

动态配气法制备氮气中乙醇扩散管气体标准物质

用动态配气装置配制体积分数为10^-6的氮气中乙醇扩散管气体标准物质，其量值不确定度为2%-3%。与静态容量法配制的乙醇气体标准物质进行比对，结果的相对误差为3.5%-4.0%。     

Temperature-dependent helix-coil transition of an alanine based peptide

The helix-coil transition of a synthetic alpha-helical peptide (the D-Arg peptide), Ac-YGG(KAAAA)(3)-CO-D-Arg-CONH(2), was studied by static far-UV circular dichroism (CD) and time-resolved infrared spectroscopy coupled with the laser-induced temperature-jump technique for rapid relaxation initiation. Equilibrium thermal unfolding measurements of the D-Arg peptide monitored by CD spectroscopy reveal an apparent two-state helix-coil transition, with a thermal melting temperature around 10 degrees C. Time-resolved infrared (IR) measurements following a laser-induced temperature jump, however, reveal biphasic (or multiphasic) relaxation kinetics. The fast phase rises within the 20 ns response time of the detection system. The slow phase has a decay lifetime of approximately 140 ns at 300 K and exhibits monotonic temperature dependence with an apparent activation energy around 15.5 kcal/mol.     

Determination of copper(II) by anodic stripping voltammetry at a 2,5-dimercapto-1,3,4-thiadiazol self-assembled monolayer-based gold electrode.

2,5-Dimercapto-1,3,4-thiadiazol (DMTD) can bind on the surface of a gold electrode through the strong gold-sulfur interaction. The fabrication and electrochemical characteristics of the DMTD self-assembled monolayer (SAM)-modified gold electrode were investigated. The DMTD SAM electrode exhibited a significantly increased sensitivity. Cu(II) was accumulated in phosphate buffer (pH 4.6) at a potential of -0.6 V (vs. Ag/AgCl) for 40 s and then determined by anodic stripping voltammetry (ASV) in copper-free phosphate buffer (pH 5.0). The effects of various parameters, such as the pH values of the preconcentration solution and measurement solution, the accumulation potential, and the accumulation time, were investigated. Under the optimum conditions, a linear calibration graph was obtained in the concentration range of 8.0 x 10(-6) to 8.0 x 10(-5) mol l(-1) with a correlation coefficient of 0.9978. The relative standard deviations for eight successive determinations were 4.3 and 2.9% for 1.0 x 10(-5) and 2.0 x 10(-5) mol l(-1) Cu(II), respectively. The detection limit (three times signal to noise) was 4.0 x 10(-7) mol l(-1). The proposed voltammetric method was utilized successfully to detect the concentration of Cu(II) ions in tap water samples.     

多元掺杂尖晶石型Li1.02MxMn2-xQyO4-y正极材料的电化学特性

The effect of doping on the electrochemical performance was studied for spinel type Li_1.02M_xMn_2-xQ_yO_4-y used as cathode material in lithium-ion battery. TG/DTA curves of the precursor(the raw materials) doped with different elements were studied. The spinel materials Li_1.02Mn₂O₄, Li_1.02Co_0.02Cr_0.01La_0.01Mn_1.96F_0.02O_3.98, Li_1.02Co_0.02Cr_0.01 La_0.01Mn_1.96Cl_0.02O_3.98, Li_1.02Co_0.02La_1.02Mn_1.97Cl_0.02O_3.98, Li_1.02Co_0.02Cr_0.01Mn_1.97O₄, were prepared by solid-state reaction method after the pretreatment of conversion under low temperature and uniform mixing. X-ray diffraction patterns showed that all the samples had perfect spinel structure. SEM indicated that the particles of the samples had uniform size and were distributed evenly. The results of the charge/discharge curves showed that Li_1.02Co_0.02Cr_0.01La_0.01Mn_1.96F_0.02O_3.98 had better performance than other materials according to the inhibition of decline of reversible capacity of spinel Li_1.02M_xMn_2-xQ_yO_4-y. Therefore, cycle performance had been improved so obviously that 93.9% of the initial capacity were preserved after 100 cycles. Furthermore, electrochemical impedance tests were carried out with the spinel Li_1.02Co_0.02Cr_0.01La_0.01Mn_1.96F_0.02O_3.98 as working electrode, Lithium as counter electrode and reference electrode. Results showed that this material possessed good charge/discharge reversible capability and had the lowest impedance in 3.95～4.25 V range (on the stage of charge / discharge).     

类水滑石诱导囊泡的自发形成

报道了一种新的囊泡合成方法——荷电固体纳米颗粒诱导囊泡的自发形成. 研究发现, 将5.0 g/L带结构正电荷的Mg₃Al类水滑石(HTlc)溶胶和0.02 mol/L由两性表面活性剂十二烷基甜菜碱(C₁₂BE)和阴离子表面活性剂双(2-乙基己基)琥珀酸磺酸钠(AOT)组成的溶液(C₁₂BE与AOT物质的量比为3∶2)混合, 当HTlc溶胶与表面活性剂溶液的体积比在1∶9～4∶6范围内, 在HTlc纳米颗粒的诱导下可自发形成囊泡, 并获得稳定的HTlc-囊泡复合分散体系.     

氢气对负载型Z-N高效催化剂的乙烯-丙烯共聚产物链结构影响

用球形的负载型Ziegler-Natta（Z-N）高效催化剂，经丙烯均聚一乙烯丙烯气相共聚两段串联反应工艺制备的聚丙烯／乙丙共聚物（PP／EPR）合金具有优良的抗冲击性能，是聚丙烯的重要高性能化改性品种，已实现大批量生产，对这类反应器合金的结构表征和结构性能关系的研究表明，其共聚物组分中既有起弹性体作用的乙丙无规共聚物，也含有相当量的乙丙多嵌段共聚物．这种多嵌段共聚物既与无规共聚物（EPR）相容，又与PP基体相容，在合金中起相容剂作用，对材料高抗冲性能的形成起着重要作用．然而，负载型Z-N高效催化剂催化乙丙共聚合的产物结构及其影响因素至今鲜见系统的研究，调控PP／EPR合金中共聚物结构的原理尚不明确．氢气在聚烯烃生产中广泛用作分子量调节剂，在PP／EPR合金的生产中同样要用氢气调节PP和EPR组分的分子量．但是，加氢对共聚物的链结构有何影响则鲜见系统的研究．本文初步研究了用Z—N高效催化剂合成的乙丙共聚物的结构特征，着重考察了聚合体系中加入链转移剂氢气对共聚物结构的影响．