基于反应性两嵌段共聚物的刺激响应性有机/无机杂化囊泡的制备及性能研究

采用ATRP法制备了结构明确的两亲性嵌段共聚物聚[甲基丙烯酸(N,N-二甲氨基)乙酯-b-甲基丙烯酸(3-(三甲氧基硅基))丙酯],其在甲醇/水的混合溶液中自组装形成囊泡结构,并通过甲基丙烯酸[3-(三甲氧基硅基)]丙酯链段中三甲氧基硅基的水解交联,形成了稳定的共聚物囊泡结构。用光散射、SEM和TEM对囊泡的结构进行了表征。所得共聚物囊泡粒子具有温度和pH双重响应性,通过简单调控温度或pH值来实现囊泡粒子的溶解与沉淀收集,可用于蛋白质等的分离与纯化。     

Preparation and characterization of Ti0.7Sn0.3O2 as catalyst support for oxygen reduction reaction

Sn-doped TiO_2 nanoparticles with high surface area of 125.7 m~2·g~(-1) are synthesized via a simple one-step hydrothermai method and explored as the cathode catalyst support for proton exchange membrane fuel cells.The synthesized support materials are studied by X-ray diffraction analysis,energy dispersive X-ray spectroscopy and transmission electron microscopy.It is found that the conductivity has been greatly improved by the addition of 30 mol%Sn and Pt nanoparticles are well dispersed on Ti_(0.7)Sn_(0.3)O_2 support with an average size of 2.44 run.Electrochemical studies show that the Ti_(0.7)Sn_(0.3)O_2 nanoparticles have excellent electrochemical stability under a high potential compared to Vulcan XC-72.The as-synthesized Pt/Ti_(0.7)Sn_(0.3)O_2 exhibits high and stable electrocatalytic activity for the oxygen reduction reaction.The Pt/Ti_(0.7)Sn_(0.3)O_2 catalyst reserves most of its electrochemically active surface area(ECA),and its half wave potential difference is 11 mV,which is lower than that of Pt/XC-72(36 mV) under 10 h potential hold at 1.4 V vs.NHE.In addition,the ECA degradation of Pt/Ti_(0.7)Sn_(0.3)O_2is 1.9 times lower than commercial Pt/XC-72 under 500 potential cycles between 0.6 V and 1.2 V vs.NHE.Therefore,the as synthesized Pt/Ti_(0.7)Sn_(0.3)O_2 can be considered as a promising alternative cathode,catalyst for proton exchange membrane fuel cells.     

可见光驱动Ag3PO4催化降解罗丹明B和甲基橙

采用简易离子交换法制备可见光驱动Ag3PO4光催化剂.通过X射线衍射、场发射扫描电子显微镜、N2吸附-脱附、紫外-可见漫反射光谱及傅里叶变换红外光谱对所制备的Ag3PO4催化剂进行表征.结果表明,在可见光照射下,Ag3PO4催化剂对罗丹明B降解表现出优越的光催化活性,但对甲基橙的降解活性低,这归因于Ag3PO4催化剂对甲基橙分子吸附量低.可见光照Ag3PO4反应体系中,空穴和超氧自由基共同发挥作用导致罗丹明B和甲基橙光催化降解.在罗丹明B的协助作用下,Ag3PO4催化剂对甲基橙的可见光催化降解活性大大增强,这是由于罗丹明B的存在可产生更多的超氧自由基,从而使甲基橙进一步降解.     

Efficient side-chain modification of dextran via base-catalyzed epoxide ring-opening and thiol-ene click chemistry in aqueous media

In this study, a novel approach by combining base-catalyzed epoxide ring-opening and thiol-ene click chemistry is presented for the side-chain modification of dextran. The vinyl-modified dextran is prepared by a basic epoxide ring opening reaction of allyl glycidyl ether in 0.1 mol/L NaOH, followed by thiol-addition click reaction of three model sulfhydryl compounds using water-soluble Irgacure 2959 as the photoinitiator, leading to side-chain functionalized dextran modified with carboxyl, bidentate dicarboxyl or amino groups. This is the first example of combining epoxide ring-opening and thiol- ene click chemistry for side-chain modification of dextran in aqueous media. Importantly, it may also be extended as a convenient and efficient method for the side-chain modification of other polysaccharides.     

Influence of Cell Disruption and Elution on Cellulase Release of Clostridium straminisolvens (CSK1)

Clostridium straminisolvens (CSK1) is a novel cellulolytic bacterium isolated from a cellulose-degrading bacterial community MC1. In this study, the influence of the following cell disruption and elution methods on CSK1cellulase release was investigated: (1) freezing–thawing, (2) ultrasonication, (3) elution, (4) freezing–thawing following elution, (5) ultrasonication following elution, and lastly (6) high-pressure homogenization following elution. The activity of the cellulases CMCase, β-glucosidase, Avicelase, FPase, and xylanase in crude extracts increased 81.5, 23.8, 87.7, 46.3, and 51.7 %, respectively, with an observed optimal treatment method for each cellulase type. The release of protein from CSK1 cells increased following either cell disruption or elution and was highest at 88.3 % in the homogenization high pressure following elution treatment. A newly observed protein was present following cell elution. The performance of cell elution as determined by real time-PCR indicated that the first time cell elution removed more than 90 % of the CSK1 cells from the substrate. These findings demonstrate that cell disruption and elution are effective methods for inducing cellulase release, and elution is the key step for CSK1. To our knowledge, this study presents the first evidence of optimal treatments for induction of cellulase release of Clostridium straminisolvens. This information will be of great value for use in subsequent efforts to better understand the cellulase characteristics of CSK1 and cellulose degradation mechanisms of the MC1 community.     

Electroactive shape memory effect of radiation cross-linked SBS/LLDPE composites filled with carbon black

The poly(styrene-b-butadiene-b-styrene) (SBS) triblock copolymer and linear low-density polyethylene (LLDPE) were blended and irradiated by γ rays to prepare shape memory polymer (SMP). Different weight fractions of conductive carbon black (CB) were filled into SMP to form a novel electroactive shape memory CB/SBS/LLDPE composite. The CB reinforced radiation cross-linked SBS/LLDPE blends for the improvement of the mechanical weakness and conductivity of SBS/LLDPE bulk and for wide practical engineering uses. The electroactive shape memory CB/SBS/LLDPE composites were investigated by electrical properties, mechanical, dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), and electroactive shape memory effects. It is found that the tensile strength, storage modulus, and resistance against mechanical and thermal mechanical cycle loading in the developed composites increased due to the role of reinforcement of CB. The melting temperatures and volume resistance of the composites decreased with the increment of CB for excellent electrical conductivity of CB. The electroactive shape memory effects of developed CB/SBS/LLDPE composites were affected by CB weight fractions and applied voltage, while good shape recovery could be obtained in the shape recovery test. When the CB fraction is more than 5 wt%, full recovery can be observed after tens of seconds and shape recovery speed increased with CB fractions and voltage increasing. However, the shape recovery rate decreases slightly with increment of cycle times.     

Validation of a Reference Gene (BdFIM) for Quantifying Transgene Copy Numbers in Brachypodium distachyon by Real-Time PCR

Brachypodium distachyon has been proposed as a new model system for gramineous plants with a sequenced genome and an efficient transformation system. Many transgenic B. distachyon plants have been generated in recent years. To develop a reliable fast method for detecting transgenic B. distachyon and quantifying its transgene copy numbers, a species-specific reference gene is of great priority to be validated both in qualitative PCR and quantitative real-time PCR detection. In this study, we first proved that the BdFIM (B. distachyon fimbrin-like protein) gene is a suitable reference gene in qualitative PCR and quantitative real-time PCR for B. distachyon. Fourteen different B. distachyon varieties were tested by both qualitative and quantitative PCRs, and identical amplification products of BdFIM were obtained with all of them, while no amplification products were observed with samples from 14 other plant species, suggesting that BdFIM gene was specific to B. distachyon. The results of Southern blot analysis revealed that the BdFIM gene was low copy number in seven tested B. distachyon varieties. In conclusion, the BdFIM gene can be used as a reference gene, since it had species specificity, low heterogeneity, and low copy number among the tested B. distachyon varieties. Furthermore, the copy number of inserted sequences from transgenic B. distachyon obtained by real-time PCR methods and Southern blot confirmed that the BdFIM gene was an applicable reference gene in B. distachyon.     

Cobalt(II) and silver(I) coordination polymers constructed from flexible bis(5,6-dimethylbenzimidazole) and substituted isophthalate co-ligands

Two coordination polymers, [Co(L1)(IPA] _n (1) and {[Ag(L2)(HMIPA)]·H₂O} _n (2) (H₂IPA = isophthalic acid, L1 = 1,2-bis(5,6-dimethylbenzimidazol-1-ylmethyl)benzene, H₂MIPA = 5-methylisophthalic acid, L2 = 1,6-bis(5,6-dimethylbenzimidazol-1-yl)hexane, have been synthesized and characterized by physicochemical and spectroscopic methods, as well as single-crystal X-ray diffraction. In 1, six-coordinated cobalt centers are bridged by L1 and IPA^2? ligands to generate a (4,4) two-dimensional layer. However, complex 2 features a 1D chain structure, which is further extended by O–H···O hydrogen bonding interactions into a 2D supramolecular layer with (6³) topology. The fluorescence and thermal gravimetric analysis of both complexes were also explored. Furthermore, the complexes 1 and 2 exhibit remarkable catalytic properties for the degradation of methyl orange dyes in a Fenton-like process.     

Synthesis,crystal structures,luminescence and catalytic properties of three silver(I) coordination polymers with bis(imidazole) and benzenedicarboxylic acid ligands

Three new silver coordination compounds with empirical formula [Ag₂(L1)₂·(ntp)·(H₂O)_3.25]_n (1), [Ag_1.5(L1)_1.5·(H_0.5bdc)·(H₂O)₄]_n (2) and [Ag(L2)(Hmip)]_n (3) (L1 = 1,4-bis(imidazol-1-ylmethyl)benzene, L2 = 1,1′-(1,4-butanediyl)bis-1H-benzimidazole, H₂ntp = 2-nitroterephthalic acid, H₂bdc = 1,3-benzenedicarboxylic acid, H₂mip = 5-methylisophthalic acid) were synthesized under hydrothermal conditions and characterized by single-crystal X-ray diffraction and physico-chemical spectroscopic methods. The silver centers display different environments with a linear geometry in 1 and 2 and distorted T-shaped geometry in 3. In 1–3, the bidentate N-donor ligands (L1 and L2) bridge neighboring silver centers to form 1D infinite chain structures. Complexes 2 and 3 are extended into 2D layers, and 1 is packed into a 3D 3,4,4,6-connected supermolecular network via classical O–H···O hydrogen bonds, while 3 is further extended into 3D framework through π–π interactions. The luminescence properties of complexes 1, 2 and 3 were investigated in the solid state. These coordination polymers possess a remarkable activity for degradation of methyl orange by persulfate in a Fenton-like process.     

Fabrication of Pascal-triangle Lattice of Proteins by Inducing Ligand Strategy

A protein Pascal triangle has been constructed as new type of supramolecular architecture by using the inducing ligand strategy that we previously developed for protein assemblies. Although mathematical studies on this famous geometry have a long history, no work on such Pascal triangles fabricated from native proteins has been reported so far due to their structural complexity. In this work, by carefully tuning the specific interactions between the native protein building block WGA and the inducing ligand R-SL , a 2D Pascal-triangle lattice with three types of triangular voids has been assembled. Moreover, a 3D crystal structure was obtained based on the 2D Pascal triangles. The distinctive carbohydrate binding sites of WGA and the intralayer as well as interlayer dimerization of RhB was the key to facilitate nanofabrication in solution. This strategy may be applied to prepare and explore various sophisticated assemblies based on native proteins.