气相色谱法测定海洋沉积物中十氯酮残留

研究了提取溶剂效率、毛细管柱极性、净化条件及共溶出干扰物等因素对十氯酮测定的影响;对比了加速溶剂提取及超声波提取方式,考察了DB-17、DB-1701与DB-5毛细管柱分离度,及不同比例甲醇/正己烷混合溶液作为定容溶液的分析结果。建立了加速溶剂萃取,H2SO4净化分离,DB-5毛细管柱电子捕获检测器(ECD)-气相色谱法(GC)测定海洋沉积物介质中有机氯农药类持久性有机污染物十氯酮残留分析方法。将5 g沉积物干样与3 g活化铜粉及3 g无水Na2SO4混匀后,采用二氯甲烷-丙酮(1∶1,V/V)进行加速溶剂萃取;萃取液浓缩后,用H2SO4净化,以1%甲醇-正己烷混合溶液定容后,采用DB-5非极性毛细管柱,及配备电子捕获检测器气相色谱测定十氯酮含量。本方法采用外标法进行定量分析,在0.005～0.1 mg/L浓度范围内,线性相关系数为0.9989;加标回收率为75%～98%;相对标准偏差为3.7%～9.6%(n=6);检出限为0.12 ng/g。     

宽离子能量检测范围垂直引入反射式飞行时间质谱仪的研制

本实验室研制了国内首台宽离子能量检测范围飞行时间质谱仪。仪器采用紧凑式电子轰击源设计,配合离子透镜系统有效的调制离子流,飞行时间质量分析器采用了离子垂直引入式,双场加速和双场反射以及大尺寸MCP检测装置设计。仪器单离子信号半峰宽约2 ns,仪器分辨率优于1600FWHM,检测实际样品质量范围为1~127 amu(仪器理论质量检测上限优于800 amu),可检测离子能量范围优于2个数量级(3~140 eV)。若该TOF质量分析器与短瞬高压脉冲放电离子源耦合联用,可广泛应用于高能离子束的快速检测,如真空阴极放电对制备薄膜、离子注入材料的表征,导电材料的离子电荷态分布以及离子扩散速度的测定等。     

Improving the properties of HDPE based separators for lithium ion batteries by blending block with copolymer PE-b-PEG

To improve the performances of HDPE-based separators, polyether chains were incorporated into HDPE membranes by blending with poly(ethylene-block-ethylene glycol) (PE-b-PEG) via thermally induced phase separation (TIPS) process. By measuring the composition, morphology, crystallinity, ion conductivity, etc, the influence of PE-b-PEG on structures and properties of the blend separator were investigated. It was found that the incorporated PEG chains yielded higher surface energy for HDPE separator and improved affinity to liquid electrolyte. Thus, the stability of liquid electrolyte trapped in separator was increased while the interfacial resistance between separator and electrode was reduced effectively. The ionic conductivity of liquid electrolyte soaked separator could reach 1.28 × 10-3 S.cm-1 at 25℃, and the electrochemical stability window was up to 4.5 V (versus Li + /Li). These results revealed that blending PE-b-PEG into porous HDPE membranes could efficiently improve the performances of PE separators for lithium batteries.     

巯基功能化介孔材料高效锚定钯负载型催化剂的制备及其苯酚加氢催化性能

以含巯基官能团有机硅烷修饰的介孔材料MCM-41和SBA-15为载体, 采用浸渍-氢气还原法制备了高分散和高活性的负载型Pd催化剂. X射线衍射、N₂吸附-脱附和透射电子显微镜表征结果显示, 所制Pd催化剂Pd-SH-MCM-41和Pd-SH-SBA-15具有很好的长程有序结构、分布均匀的孔径、高比表面积及高度分散的Pd颗粒. 苯酚加氢反应结果表明, 以Pd-SH-MCM-41和Pd-SH-SBA-15为催化剂时, 在80℃, 1.0MPa反应1h, 苯酚转化率达99%以上, 环己酮选择性为98%. 它们的催化活性为商业Pd/C催化剂的5倍, Pd/MCM-41和Pd/SBA-15催化剂的3倍. 这可归因于介孔材料表面修饰的巯基官能团对Pd的锚定作用, 避免了Pd颗粒的团聚, 使其高度分散在介孔材料上.     

Synthesis, Structure and Properties of a Novel Cobalt(Ⅱ) Bromide Complex Supported by Phosphine Ligands

<正>The C-Br bond of 2-bromothiophene was successfully cleavaged by tetrakis(trimethylphosphine)cobalt(0). Penta-coordinate cobalt(II) bromide complex 1 (α-C_4H_3S)CoBr(PMe_3)_3 as C-Br bond activation product was obtained. The molecular and crystal structures of complex 1 were determined by single-crystal X-ray diffraction. Complex 1 belongs to the orthorhombic crystal system, space group Pnma with a = 20.428(4) , b =11.036(2) , c = 9.201(2), V = 2074.3(7)~3, Z = 4, D_c = 1.442 g/cm~3, μ = 0.401 mm~(-1), F(000) = 924 and T = 273 K. Complex 1 was also characterized by elemental analysis, IR, UV-Vis, photoluminescence (PL) spectroscopy and TGA.     

Capability of DNA-fueled molecular machine in tuning association rate of DNA-functionalized gold nanoparticles

The capability of our newly developed DNA-machine-driven strategy in tuning the association rate of DNA-AuNPs was compared with that of linker-addition strategy which has potential practical applications in different fields. The new established strategy shows its superiority to the linker-addition strategy in tuning the association rate of DNA-AuNPs in both pre-incubation treatment and non-incubation treatment conditions since its two components (a complex and a catalyst-oligonucleotide) can be individually optimized to make the machine run at an optimal rate. This strategy will provide a more convenient and flexible option in designing an oligonucleotide detection system and building a complex and versatile device.     

Dynamics of viscous fingers in Hele-Shaw cells of liquid crystals Theory and experiment

The theoretical and experimental developments in the interfacial dynamics and the formation of viscous fingering patterns in Hele-Shaw cells of liquid crystal-air systems are summarized and discussed. These include radial and linear cells with or without grooves engraved on the cell plates. Instabilities of fingers, the role of intrinsic and extrinsic anisotropies, etc., are emphasized. In a linear cell, when the injected air is kept at constant pressure, a whole sequence of successive instabilities of fingers (hump, tip-splitting, sidewrinkling, sidebranching and DLA-like structure) is observed in a single run of the experiment. In our theory, the equations of motion of nematic flows in Hele-Shaw cells are derived from the Ericksen-Leslie equations. In the linear approximation, the equations resemble those of isotropic liquids with the presence of effective viscosities and anisotropic surface tension. Experimental observations are interpreted with the introduction of an effective control parameter which may be time dependent. Special features of viscous fingers in liquid crystals in contrast to those in isotropic liquids, such as asymmetric dendritics, displacement of the finger from the central axis of the linear cell, and reentrant sequence of patterns, are pointed out. Plausible explanations of these phenomena are given. In this newly developed field, a large number of interesting problems remain to be solved.     

Biomass Composition, Lipid Characterization, and Metabolic Profile Analysis of the Fed-Batch Fermentation Process of Two Different Docosahexanoic Acid Producing Schizochytrium sp. Strains

Growth and fermentation characteristics, biomass composition, lipid characterization and metabolic profiling analysis of two different Schizochytrium sp. strains, the original strain and the industrial adaptive strain, were investigated in the fed-batch fermentation process. The final cell biomass, total lipids content, docosahexanoic acid (DHA) content and DHA productivity of the adaptive strain were much higher than those of the original strain. The metabolic distinctions which extensively existed between these two strains were revealed by the score plot of principal component analysis. In addition, potential biomarkers responsible for discriminating different strains were identified as myo-inositol, histidine, alanine, asparagine, cysteine, and oxalic acid. These findings provided new insights into the industrial strain screening and further improvement of DHA production by Schizochytrium sp.     

Crystal structure and thermal behavior of cold-crystallized poly(trimethylene terephthalate)

The structure and thermal behavior of cold-crystallized poly(trimethylene terephthalate) (PTT) are revealed in detail by DSC, AFM, TEM, and WAXD as well as in situ FTIR and SAXS techniques. There is no effect of crystallization temperature and initial state on the crystal modification, yet the morphology is strongly affected by these two factors. First, the small rod-like lamellae for PTT are obtained during the cold crystallization instead of the spherulites formed in the melt crystallization. Second, the edge-on lamellar orientation in thin films is identified during the cold crystallization. The thickness and the lateral width of rod-like lamellae get larger and larger with increasing crystallization temperature. Thin lamellar crystals assemble randomly when the cold-crystallization temperature is lower, while lamellar stacks composed of thicker lamellae are observed when the PTT was annealed at elevated temperature. Moreover, for the cold-crystallized PTT, the final melting temperature does not vary with the crystallization temperature. This phenomenon is explained by the structural improvement during the heating process. For the cold-crystallized PTT sample at lower temperature, three transitions occur when it is heated again: the relaxation of the rigid amorphous phase, the reorganization of molecules in the intermediate phase, and then the melt–recrystallization behavior. Those transitions finally lead to thicker lamellae besides a higher crystallinity before the final fusion. Therefore, the final melting peak of these lamellae is at the same temperature.