MXene-碳黑/硫复合材料在锂硫电池一体式电极的研究

锂硫电池的实际能量密度不高和多硫化物（LiPSs）的穿梭效应等问题严重影响了该电池的实际应用。本文通过将二维的Ti₃C₂T_x Mxene纳米片与碳黑/硫（CB/S）材料进行混合,制备了Ti₃C₂T_x-CB/S正极材料并将其涂覆在商业隔膜（PP）上,最终获得了Ti₃C₂T_x-CB/S-PP一体式电极并用于锂硫电池。利用Ti₃C₂T_x纳米片对CB/S进行修饰,不仅能提高活性物质硫的导电性,还能对扩散的LiPSs进行物理阻挡和化学吸附。而一体式电极的设计有利于提高电池的能量密度。恒流充放电测试结果表明,Ti₃C₂T_x-CB/S-PP电极在0.1 C电流下的初始放电容量为1028.8 mAh·g^-1,高于不含Ti₃C₂T_x的CB/S-PP电极的896.8 mAh·g^-1。Ti₃C₂T_x-CB/S-PP电极还展示出了比基于传统铝箔集流体的Ti₃C₂T_x-CB/S-Al电极更好的循环稳定性,前者在0.5 C下400圈长循环测试中的每圈衰减率为0.072%,而后者则为更高的0.10%。本文利用Ti₃C₂T_x-CB/S构建一体式电极的策略为实现高性能和高能量密度的锂硫电池提供了新的研究方向。     

Preparation and physicochemical properties of konjac glucomannan ibuprofen ester as a polysaccharide-drug conjugate

Abstract

A novel drug-polysaccharide conjugate with konjac glucomannan (KGM) as a drug carrier was fabricated through the esterification of ibuprofen (IBU), an anti-inflammatory drug, with KGM. The influences of the reaction conditions, such as the amount of ibuprofen acryl chloride, reaction time, reaction temperature, and the amount of catalyst, on the degree of substitution were investigated. KGM ibuprofen ester (KGM-IBU) was characterized by Fourier transform infrared spectrometry (FTIR), X-ray diffraction (XRD), solid-state ¹³C NMR, scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and dynamic mechanical analysis (DMA). The hydrophobic structure of IBU in KGM-IBU was proven by the fluorescence emission spectra of pyrene. In addition, by using commercially available ibuprofen sustained-release capsules (IBU-SRC) as a control, the in vitro controlled release performance of KGM-IBU was evaluated. The cumulative release of IBU-SRC within 36?h was 94%, while that of KGM-IBU within 36?h was 77%. The results showed that KGM-IBU had better sustained-release performance without a burst release effect. The obtained products could be used as a potential biocompatible sustained-release drug delivery system.     

Sustainable Route for Synthesizing Aluminosilicate EU-1 Zeolite

Developing sustainable routes for the synthesis of zeolites is still a vital and challenging task in zeolite scientific community. One of the typical examples is sustainable synthesis of aluminosilicate EU-1 zeolite, which is not very efficient and environmental-unfriendly under hydrothermal condition due to the use of a large amount of water as solvent. Herein, we report a sustainable synthesis route for aluminosilicate EU-1 zeolite without the use of solvent for the first time. The physicochemical properties of the obtained EU-1 zeolite are characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), thermogravimetry-differential thermal analysis (TG-DTA), N₂ sorption, inductively coupled plasma (ICP) analysis, and solid nuclear magnetic resonance (NMR), which show the product has high crystallinity, uniform morphology, large BET surface area, and four-coordinated aluminum species. Moreover, the impact of synthesis conditions is investigated in detail. The sustainable synthesis of aluminosilicate EU-1 zeolite under solvent-free     

Analysis of Asymmetric Long-Range Surface-Plasmon Waveguide with High-Confinement Mode

We model and study the asymmetric long-range surface-plasmon waveguides using the finite-element method. We introduce two types of asymmetric structures and discuss their modal properties compared to traditional long-range surface-plasmon waveguides. Although the propagation distance is decreased, the energy-confinement capability is improved for asymmetric long-range waveguiding structures when the geometrical parameters are properly selected. Our simulation result offers guidance for tuning properties of plasmonic waveguides and providing ways for enhancing electromagnetic energy confinement in long-range surface-plasmon waveguides.     

基于拉锥结构的全光纤型内窥OCT探针研究

本文报道了一种基于拉锥结构的全光纤型内窥光学相干层析成像探针. 基于大纤芯多模光纤的低光束发散特性, 使用大纤芯多模光纤代替透镜作为成像元件, 并在单模光纤与大纤芯多模光纤之间引入过渡拉锥段以减少插入损耗. 首先利用光学仿真软件(Rsoft)确定探针的最佳结构, 然后通过拉锥、切割以及熔接工艺实现探针制作, 并对探针的出射光束特性与插入损耗进行测量, 最后将该探针与扫频光学相干层析成像主系统联机, 对人体指尖皮肤及鸡气管壁组织进行成像. 该探针直径为250 μm, 不锈钢保护管外径为325 μm, 硬端长度1 cm, 插入损耗约为0.3 dB, 空气中有效成像范围达800 μm. 该探针为内窥光学相干层析成像技术在心血管疾病的应用提供了高紧凑度、高传输效率与高灵活性的选择.     

Progress of Jinping Underground laboratory for Nuclear Astrophysics (JUNA)

Jinping Underground laboratory for Nuclear Astrophysics(JUNA) will take the advantage of the ultra-low background of CJPL lab and high current accelerator based on an ECR source and a highly sensitive detector to directly study for the first time a number of crucial reactions occurring at their relevant stellar energies during the evolution of hydrostatic stars. In its first phase, JUNA aims at the direct measurements of~(25)Mg(p,γ)~(26)Al,~(19)F(p,α)~(16)O,~(13)C(α,n)~(16)O and ~(12)C(α,γ)~(16)O reactions. The experimental setup,which includes an accelerator system with high stability and high intensity, a detector system, and a shielding material with low background, will be established during the above research. The current progress of JUNA will be given.     

A proposed direct measurement of cross section at Gamow window for key reaction ~(19)F( p,α)~(16)O in Asymptotic Giant Branch stars with a planned accelerator in CJPL

In 2014, the National Natural Science Foundation of China(NSFC) approved the Jinping Underground Nuclear Astrophysics laboratory(JUNA) project, which aims at direct cross-section measurements of four key stellar nuclear reactions right down to the Gamow windows. In order to solve the observed fluorine overabundances in Asymptotic Giant Branch(AGB) stars, measuring the key ~(19)F( p,α)~(16)O reaction at effective burning energies(i.e., at Gamow window) is established as one of the scientific research sub-projects. The present paper describes this sub-project in details, including motivation, status, experimental setup, yield and background estimation, aboveground test, as well as other relevant reactions.     

Hybrid process for texturization of diamond wire sawn multicrystalline silicon solar cell

Acid texture is difficult for diamond wire sawn (DWS) multicrystalline silicon (mc‐Si) wafer owing to the inhomogeneous distribution of damage layer on the surface. In this article, metal‐assisted chemical etching (MACE) has been selected for introducing a porous seeding layer to induce acid texturing etching. SEM results show that the oval pit structures coverage get obvious improvement even on the smooth areas. Owing to the further improved light absorption ability by second MACE and nanostructure rebuilding (NSR) process, nanostructured DWS mc‐Si solar cell has exhibited a conversion efficiency of 17.96%, which is 0.45% higher than that of DWS wafer with simple acid texture process. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Preliminary investigation into feasibility of dissolved methane measurement using cavity ringdown spectroscopy technique

For the exploration of gas hydrate resources by measuring the dissolved methane concentration in seawater, a continuous-wave cavity ringdown spectroscopy (CW-CRDS) experimental setup was constructed for trace methane detection. A current-modulation method, rather than a cavity-modulation method using an optical switch and a piezoelectric transducer, was employed to realize the cavity excitation and shutoff. Such a current-modulation method enabled the improvement of the experimental setup construction and stability, and the system size and stability are critical for a sensor to be deployed underwater. Ringdown data acquisition and processing were performed, followed by an evaluation of the experimental setup stability and sensitivity. The obtained results demonstrate that great errors are introduced when a large fitting window is selected if the analog-to-digital converter has an insufficient resolution. The ringdown spectrum of methane corresponding to the 2v ₃ band R(4) branch was captured, and the methane concentration in lab air was determined to be 2.06 ppm. Further experiments for evaluating the quantitative ability of this CW-CRDS experimental setup are underway from which a high-sensitivity methane sensor that can be combined with a degassing system is expected.     

Direct observation of nuclear spin diffusion in real space

Images directly visualizing the spatial spin-diffusion process are reported. The measurements were performed using a magnetic resonance force microscope. The field gradient associated with the force-detection experiment is large enough to affect the spin dynamics and a modified kinetics of the spin-diffusion process is observed. The effects of the gradient were compensated for by a pulse scheme and a pure Zeeman diffusion rate constant of D=(6.2+/-0.7)x10{-12} cm{2}/s in CaF2 was observed.