固定波长同步荧光光谱参数的理论计算

基于荧光激发光谱和发射光谱对波长呈高斯分布的设定,本文推导出固定波长同步荧光光谱峰峰值位置、相对强度和半峰宽度等3个主要光谱参数的理论计算式。所提出的计算式应用于若干荧光物质光谱参数的计算,并和实测值、文献计算值作了对照。结果表明,和文献计算方法相比,本法与所研究物质的实际光谱参数较为接近,可为固定波长同步荧光光谱参数的理论计算提供一有效方法。     

希土元素与三甲胺氧化物配合物的制备及光谱性质

尽管文献报道了三甲胺氧化物与Mn、Co、Ni、Zn、Cd、Cu等多种离子在有机溶剂中形成较稳定的配合物。但对其金属配合物的研究远不如芳香族杂环化合物那样引起人们广泛的注意。本文研究了它与希土元素形成配合物的合成和光谱性质。     

γ-irradiation of polypropylene in vacuum and in air

Polypropylene films were irradiated with ⁶⁰Co γ-rays in vacuum or in air and stored in air. Just after irradiation, the concentration of carbonyl group of the sample irradiated in air only increased with dose. The concentrations of both samples increased with storage time. The more the absorbed doses, the higher the increasing rates. The increasing rate of the concentration of carbonyl group during irradiation in air was higher than those during storage in air. Just after irradiation, the tensile strengths and the elongations of the both samples somewhat increased with dose at the doses less than 5 Mrad, but decreased at doses more than 13 Mrad. The tensile strength and the elongation of the sample irradiated in air decreased with storage time. Those of the sample irradiated in vacuum also decreased with storage time but the decreasing rates were much smaller than those in the sample irradiated in air. The gel fractions of the samples irradiated in vacuum and annealed in vacuum were somewhat higher than those irradiated in vacuum and not annealed. To elucidate high oxidation rate in the sample irradiated in air during and after irradiation, reaction mechanisms were discussed. To clarify the difference of mechanical properties between the samples irradiated in vacuum and in air, the effect of crosslink was considered, together with the oxidation.     

Investigation on the chain-to-chain and chain-to-open-framework transformations of two one-dimensional aluminophosphate chains

Using ethylenediamine as a template, two one-dimensional (1-D) aluminophosphate compounds [AlP(2)O(8)H][NH(3)CH(2)CH(2)NH(3)] (1) and [AlP(2)O(8)][NH(3)CH(2)CH(2)NH(3)][NH(4)] (2) have been prepared from a gel system: 1.0:x:y:44 Al(i-PrO)(3)-H(3)PO(4)-en-EG (x = 3.0-9.0, y = 1.0-11.0). Compound 1 consists of edge-sharing four-membered ring (MR) chains, denoted as AlPO-ESC, and compound 2 consists of corner-sharing 4-MR chains, denoted as AlPO-CSC. The molar ratio of en:H(3)PO(4) in the starting gel has an important influence on the final product. If en:H(3)PO(4) > or = 1, AlPO-CSC is obtained, while if en:H(3)PO(4) < 1, AlPO-ESC is formed. These two chains can transform to each other upon addition of some extra amount of en or H(3)PO(4) to the reaction mixture in which AlPO-ESC or AlPO-CSC is crystallized. On the basis of XRD and (27)Al and (31)P MAS NMR analyses, a possible chain-to-chain transformation mechanism is proposed. The corner-sharing 4-MR chains of AlPO-CSC, as well as the edge-sharing 4-MR chains of AlPO-ESC can be assembled to 3-D open-framework compound NiAlP(2)O(8).C(2)N(2)H(9) through Ni(2+) cations. It is noted that AlPO-CSC remains in the structure of NiAlP(2)O(8).C(2)N(2)H(9). It is believed that AlPO-ESC might be first transformed to AlPO-CSC followed by the assembly to 3-D open-framework of NiAlP(2)O(8).C(2)N(2)H(9) through Ni(2+) cations.     

Synthesis and Characterization of a New Layered Aluminophosphate [Al3P4O16][(CH3)2NHCH2CH2NH(CH3)2][H3O]

A new layered aluminophosphate, denoted AlPO-CJ12, has been synthesized in the system Al(OPrⁱ)₃-H₃PO₄-tetramethylethylenediamine-triethyleneglycol and its structure solved by single-crystal X-ray diffraction analysis. It is further characterized by X-ray powder diffraction, ICP, TG, DTA, and elemental analyses. The compound has an empirical formula of [Al₃P₄O₁₆][(CH₃)₂NHCH₂CH₂NH(CH₃)₂][H₃O], and crystallizes in the triclinic space group P-1 (No. 2) with a=8.9907(6) Å b=9.8359(6) Å, c=14.5566(8) Å, α=75.872(3)°, β=88.616(3)°, γ=63.404(3)°, Z=2, R₁=0.0451, and wR₂=0.1094. The alternation of tetrahedral AlO₄ and PO₃ (=O) units forms a sheet structure with a 4×6×8 network. The inorganic layers stacked in an AAAA sequence are held together by the protonated organic amine and water molecules. The co-templating role of the water molecules is studied by the calculation of the nonbonding host-guest interaction energies through a computational simulation.     

二安替比林基-(对二甲氨基)苯基甲烷与铬(Ⅵ)显色反应

合成了二安替比林基-(对二甲氨基)苯基甲烷(DADM).在Mn(Ⅱ)和吐温-60存在下,Cr(Ⅵ)与DADM反应生成生色化合物,λ_(max)为550nm,ε为1.03×~5L·mol~(-1).cm~(-1)。Cr(Ⅵ)量在0～10μg/25ml间符合比尔定律。用于天然水和电镀废液中微量铬(Ⅵ)的测定,结果满意。     

四(三苯基氧膦)高氯酸钕合乙醇配合物的合成及结构测定

合成了Nd(ClO_4)_3·4phP=O·C_2H_5OH配合物,用四园衍射仪测定了它的分子及晶体结构,此晶体属三斜晶系P1空间群,晶胞参数为:a=13.475(61)A;b=15.003(15)A;c=18.697(15)A;α=85.44(7);β=78.49(24)°;γ=83.13(26)°;V=3671.2A,分子由99个非氢原子组成,实际上分子可分为三个部分即:配阳离子[Nd(ClO_4)_2·4phPO]~+;阴离子ClO_4和溶剂合分子C_2H_5OH配阳离子的钕与八个氧配位,四个氧来自双齿配位的ClO_4,四个氧来自四个ph_3PO,八个配位氧组成三角十二面体。 中性膦(磷)类化合物包括(RO)_3P=O和R_3P=O是一类重要的萃取剂。工业上已应用的TBP和TOPO都属于这一类。为了研究这类萃取剂在不同底液中萃取行为之所以不同的内在因素,我们制备了不同希土盐类与三苯基氧膦的配合物,并对它们进行了结构测定。已知的中性氧膦希土配合物中进行过结构测定的有Ce(NO)·2phP=O、Nd(NO)_2·2php=O·C_2HOH、La(NO_3)_3·3php=O·C_2H_5OH·CHCl_3和Nd(NCS)·4php=O。这些配合物晶体及分子结构各异,这表明了三苯基氧膦在形成配合物时的复杂性。本文报导的Nd(ClO_4)·4phP=O·C_2H_5OH实际上是由三部分组成;即[Nd(ClO_4)_2·4phP=O]~+外界的ClO_4和溶剂合分子。这在中性配体与高氯酸希土形成的配合物中时有发现。已知结构的     

中性磷(膦)类稀土萃合物的结构研究(Ⅲ)——三(三苯基氧膦)合硝酸镧的合成及结构测定

合成了三(三苯基氧膦)合硝酸镧络合物, 经鉴定确定络合物化学式为La(NO_3)_3·3ph_3PO·C_2H_5OH·CHCl_3。其中C_2H_5OH和CHCl_3为溶剂化分子。经X射线单晶衍射, 测定了该络合物属单斜晶系P2_1/n空间群, 晶体学参数如下a=1.3111(5) nm Z=4b=2.5075(10) nm F(000)=2687.65c=1.8725(6) nm μ吸收系数=9.83(cm~(-1))β=98.53(3)° d计算=1.45 gcm~(-3)V=6.088 nm d实验=1.43 gcm~(-3)La与9个氧直接配位, 其中六个氧来自三个双卤配位硝酸根, 另三个氧分别由三个苯基氧膦上的膦酰基所提供。La-O平均键长0.2549 nm。     

2020 Roadmap on two-dimensional nanomaterials for environmental catalysis

This roadmap demonstrates a series of two-dimensional nanomaterials, such as graphene, black phosphorus, oxides, layered double hydroxides, chalcogenides, bismuth-based layered compounds, MXenes, metal organic frameworks, covalent organic frameworks, and others, for environmental catalysis.