Locally enhanced relative humidity for scanning probe nanolithography

The formation of a water meniscus between a sharp tip and a solid surface is one of the prevailing requirements for scanning probe microscope (SPM)-based lithographies, such as dip-pen nanolithography (DPN) and conductive tip induced oxidation. The water meniscus functions as a medium for the oxidation of or mass transfer to the solid surface. Here we report a simple, efficient, and effective approach to enhance the local relative humidity and thus increase the size of the water meniscus by bringing a water-containing capillary tube to the proximity of the tip-surface contact area. The enhancement in local relative humidity is confirmed via an increase in the measured tip-surface adhesion forces and the widths of DPN generated parallel lines. Compared to the global control of relative humidity for the whole lithography system, the short distance between the "water reservoir" and the tip-surface contact area enables rapid increase in the local vapor pressure of water, less perturbation, and minimal erosion to the state-of-the-art electronics. As a result, most scanning probe lithography experiments at high relative humidity can now be performed in a reasonable time frame.     

Photocatalytic degradation of methylene blue on Fe3+-doped TiO2 nanoparticles under visible light irradiation

Fe³⁺-doped TiO₂ composite nanoparticles with different doping amounts were successfully synthesized using sol-gel method and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and ultravioletvisible spectroscopy (UV-Vis) diffuse reflectance spectra (DRS). The photocatalytic degradation of methylene blue was used as a model reaction to evaluate the photocatalytic activity of Fe³⁺/TiO₂ nanoparticles under visible light irradiation. The influence of doping amount of Fe³⁺ (ω: 0.00%–3.00%) on photocatalytic activities of TiO₂ was investigated. Results show that the size of Fe³⁺/TiO₂ particles decreases with the increase of the amount of Fe³⁺ and their absorption spectra are broaden and absorption intensities are also increased. Doping Fe³⁺ can control the conversion of TiO₂ from anatase to rutile. The doping amount of Fe³⁺ remarkably affects the activity of the catalyst, and the optimum efficiency occurs at about the doping amount of 0.3%. The appropriate doping of Fe³⁺ can markedly increase the catalytic activity of TiO₂ under visible light irradiation. __________ Translated from Journal of Northwest Normal University (Natural Science), 2006, 42(6): 55–56 [译自: 西北师范大学学报(自然科学版)]     

真珠钙驱铅实验研究

研究了真珠钙驱铅效果，给亚急性中毒的大鼠服用后，可增加铅从尿中排量，降低骨中蓄积量，对防治铅中毒有一定作用。     

两组份互穿网络聚合物的合成研究

以蓖麻油聚氨酯和聚醚聚氨酯的不同重量比与光敏剂、催化剂、稀释剂、促进剂所组成的多相体系为反应物,分别在紫外光照射和加热的条件下合成网络Ⅰ和网络Ⅱ的互穿网络聚合物(IPN)。改变网络Ⅱ聚醚聚氨酯中各组份的摩尔比制得系列样品。红外光谱,应力-应变曲线和动态力学性能测定发现,样品的力学性能与两组份重量比和网络Ⅱ中不同组成都存在着一定关系。这些结果,为该体系IPN的合成和应用提供了一定依据。     

Ion Association of Cadmium Acetate from Conductivity Measurements

Conductivity of cadmium acetate over the concentration range of 10^?4 to 10^?3M was measured at 25°C. The approximate dissociation constant of CdAc₂ in dilute aqueous solution was estimated from the relation, α=[Λ?36.5+39√C(1+2α)]/[57.9?93√C(1+2α)]. The limiting value of log₁₀K for the association constant of CdAc⁺ ion was evaluated to be 1.75 at 25°C.     

芥子气模拟剂2-氯乙基乙基硫醚的光催化降解

利用连续流动微反、原位红外和GC/MS等手段考察了芥子气模拟剂2-氯乙基乙基硫醚（2-CEES）在P25 TiO2上的光催化降解反应,证实CO2和H2O是这个反应的最终产物.详细的跟踪分析表明,除了CO2和H2O外,在反应的气相混合物中可检测到C2H4、CH3CHO、CH4、CO、HCl和H2S；少量小分子的羧酸、醚和砜；微量C2H5SC2H5、C2H5S2C2H5、C2H5SC2H4Cl和CH2ClCH2Cl等中间产物;在反应后的催化剂表面可检测到C2H5S2C2H5、C2H5SC2H4OH、C4H9S2C2H5和C2H5S2C2H4OH、等物.根据这些结果提出了2-CEES光催化降解的反应机理,推断2-CEES的光催化降解涉及脱氯、C－S键断裂、有机硫化物光聚合和裂解等复杂过程最终转化为CO2和H2O.认为各种硫物种在表面的积聚引起了催化剂的缓慢失活.     

Synthesis of a transition metal-dithionite complex, (η5-C5H5)(CO)2FeS(O)2S(O)2Fe(CO)2(η5-C5H5)

The reaction of Na[η⁵-C₅H₅Fe(CO)₂] with large excess of SO₂ in THF at ?78°C followed by warming to room temperature affords an iron—dithionite complex, (η⁵-C₅H₅)(CO)₂FeS(O)₂S(O)₂Fe(CO)₂(η⁵-C₅H₅).     

Study on Bifunctionality of Mo/HZSM-5 Catalysts for Methane Dehydro-Aromatization under Non-oxidative Condition

The optimum Mo/[H~+] ratio per unit cell of the active precursors in Mo/HZSM-5 catalysts for methane dehydro-aromatization, measured by 1H MAS NMR, was found to be about 1 when adjusting the acid sites by altering either the SiO2/Al2O3 ratios or the Mo loading. This implies that a concerted interaction between the Mo species and the Bronsted acid sites probably features the bifunctionality of the Mo/HZSM-5 catalyst. On the other hand, it was found that the driving force for Mo species to move into the HSZM-5 zeolite channels and the interaction between the Mo species and the Bronsted acid sites are closely and proportionably related with the amount of Bronsted acid sites per unit cell.     

Catalytic phenomena in the electrochemical reduction of triphenylphosphine and triphenylphosphine oxide in non-aqueous solvents with tetraalkylammonium supporting electrolytes

Polarography, cyclic voltammetry and coulometry reveal that a catalytic reduction of the tetraalkylammonium cation, R₄N⁺, of the supporting electrolyte is involved in the electrochemical reduction of triphenylphosphine (TPP) and its oxide (TPPO) in aprotic solvents such as acetonitrile, dimethylformamide and hexamethylphosphoramide. There is however progressive consumption of TPP and TPPO resulting in the final formation of phenyl substitution products (RPØ₂ and ROPØ₂). Comparison with the reduction of the BuPØ₃⁺ cation allows to propose the following mechanism which involves a chemical type catalytic process:

1. Download full-size image

Redox type catalytic mechanisms are discussed and shown to be unlikely. Values of the alkylation rate constant are derived from the polarographic or the coulometric data or from cyclic voltammetry according to its magnitude which varies with the solvent. TPP anion radical appears as more readily alkylable than TPPO anion radical.     

β—环糊精交联聚合物与有机显色剂客体包结反应研究

β－环糊精与环氧氯丙烷交联共聚物是一种具有三维网状结构的聚合树脂，它保留了β－环糊精所原有的与有机疏水基团形成包结物的特性，与一系列含有芳得环的有机显色剂配体（如吡啶偶氮染料，变色酸双偶氮试剂，三苯甲烷类碱性与酸性染料以及杂氧蒽酮类试剂等）均可形成相应的包结配合物，着重研究了有关包结配合物的稳定性及影响稳定性的各种因素，为进一步研究包结物分离富集痕量金属提供必要的理论依据。