Application of beam irradiation in preparation of visible light responsive TiO2 films

TiO₂ films were prepared by sol-gel method. In order to improve the utilization of light, the technologies of implantation of transition metal ions (V⁺ and Cr⁺) and electron beam irradiation to deposit noble metal particles (Ag and Pt) were used. A red shift was found in the spectrum of modified TiO₂ films. The photocatalytic experiments showed that the photocatalytic ability under visible light irradiation could be improved dramatically by both the implantation of transition metal and the electron beam irradiation. __________ Translated from Chinese Journal of Catalysis, 2007, 28(1): 39–44 [译自: 催化学报]     

Microwave synthesis and photoluminescent properties of Sr2CeO4/Ln3+ (Ln = Er, Ho, Tm)

Sr₂CeO₄/Ln³⁺ (Ln = Er, Ho, Tm) phosphors were synthesized with the microwave radiation method for the first time. The luminescent properties of the samples were investigated and the up-conversion luminescence of Er³⁺, Ho³⁺ and Tm³⁺ doped Sr₂CeO₄ phosphors was observed. The spectra indicate that the energy transfer takes place from the triplet excited state of MLCT (metal-to-ligand charge transfer) state for Sr₂CeO₄ (sensitizer) to the rare earth ions (activator). __________ Translated from Journal of Hebei Normal University (Natural Science Edition), 2007, 31(2): 212–216 [译自: 河北师范大学学报 (自然科学版)]     

Fe3+掺杂三维分级纳米Bi2WO6的合成及其光催化活性增强机理

利用水热法合成了Fe³⁺掺杂的三维分级纳米Bi₂WO₆,借助X射线衍射（XRD）、场发射扫描电镜（FE-SEM）、透射电镜（HRTEM）、能谱（EDS）、紫外可见漫反射（UV-Vis-DRS）等测试手段对所得样品的相组成、形貌和谱学特征进行了表征。选择罗丹明B为模型污染物研究所得样品在可见光下的催化活性。结果表明,Fe³⁺掺杂Bi₂WO₆为新颖的分级纳米结构,且Fe³⁺掺杂能有效提高Bi₂WO₆的光催化活性,Fe³⁺掺杂量对Bi₂WO₆活性的影响显著;实验结果还表明,所得Fe³⁺掺杂Bi₂WO₆催化剂的稳定性较好,易于回收。此外,还对Fe³⁺掺杂Bi₂WO₆的光催化活性增强机理进行了研究,缺电子的Fe³⁺作为电子捕获中心有利于促进光生电子-空穴对的分离,从而提高Bi₂WO₆的光催化活性。     

Fe~(3+)掺杂三维分级纳米Bi_2WO_6的合成及其光催化活性增强机理(英文)

利用水热法合成了Fe3+掺杂的三维分级纳米Bi2WO6,借助X射线衍射(XRD)、场发射扫描电镜(FE-SEM)、透射电镜(HRTEM)、能谱(EDS)、紫外可见漫反射(UV-Vis-DRS)等测试手段对所得样品的相组成、形貌和谱学特征进行了表征。选择罗丹明B为模型污染物研究所得样品在可见光下的催化活性。结果表明,Fe3+掺杂Bi2WO6为新颖的分级纳米结构,且Fe3+掺杂能有效提高Bi2WO6的光催化活性,Fe3+掺杂量对Bi2WO6活性的影响显著;实验结果还表明,所得Fe3+掺杂Bi2WO6催化剂的稳定性较好,易于回收。此外,还对Fe3+掺杂Bi2WO6的光催化活性增强机理进行了研究,缺电子的Fe3+作为电子捕获中心有利于促进光生电子-空穴对的分离,从而提高Bi2WO6的光催化活性。     

Preparation of nanocrystalline Fe-doped TiO<Subscript>2</Subscript> powders as a visible-light-responsive photocatalyst

Nanocrystalline Fe-doped TiO₂ powders were prepared using TiOSO₄, urea, and Fe(NO₃)₃ · 9H₂O as precursors through a hydrothermal method. The as-synthesized yellowish-colored powders are composed of anatase TiO₂, identified by X-ray diffraction (XRD). The grain size ranged from 9.7 to 12.1 nm, calculated by Scherrer’s method. The specific surface area ranged from 141 to 170 m²/g, obtained by the Brunauer–Emmett–Teller (BET) method. The transmission electron microscopy (TEM) micrograph of the sample shows that the diameter of the grains is uniformly distributed at about 10 nm, which is consistent with that calculated by Scherrer’s method. Fe³⁺ and Fe²⁺ have been detected on the surface of TiO₂ powders by X-ray photoelectron spectroscopy (XPS). The UV–Vis diffuse reflection spectra indicate that the light absorption thresholds of the Fe-doped TiO₂ powders have been red-shifted into the visible light region. The photocatalytic activity of the Fe-doped TiO₂ was evaluated through the degradation of methylene blue (MB) under visible light irradiation. The Fe-doped TiO₂ powders have shown good visible-light photocatalytic activities and the maximum degradation ratio is achieved within 4.5 h.     

Fe2BiTaO7纳米催化剂的组织结构及光催化性能

用固相反应合成法合成了光催化剂Fe2BiTaO7,通过XRD、SEM、TEM、紫外-可见漫反射等表征方法对其组织结构及光催化性能进行了研究。结果表明Fe2BiTaO7为立方晶系烧绿石结构,空间群为Fd3m,禁带宽度为1.72 e V。通过比较Fe2BiTaO7、P25TiO2、掺氮Ti O2和Bi2In Ta O7的可见光光催化降解罗丹明B,发现Fe2BiTaO7降解效果及催化活性均高于其它催化剂,并且Fe2BiTaO7降解罗丹明B效率是掺氮二氧化钛的1.5倍。Fe2BiTaO7降解罗丹明B的曲线符合一级动力学,一级动力学常数为0.022 93 min-1。研究了罗丹明B可能的降解路径和Fe2BiTaO7在可见光下降解苯酚的效果。Fe2BiTaO7(可见光)光催化剂系统适用于纺织工业废水处理。     

具有高可见光催化活性的Ti3+和碳共掺杂改性的TiO2光催化剂

以乙醇为碳源,采用操作简单的真空活化法一步实现对TiO₂的Ti³⁺与C的共掺杂改性,TiO₂用X衍线衍射、紫外-可见光谱、顺磁共振、X射线光电子能谱和红外光谱等手段表征了催化剂的结构、组成、光学性质. 结果表明, 经Ti³⁺与C共掺杂改性后的催化剂表现出高的可见光降解甲基橙活性. 复合在催化剂表面的石墨可以增强催化剂对可见光的响应范围,而Ti³⁺与氧缺陷形成的掺杂能级则可以提高光生电子的迁移效率. 实验表明,两者之间的协同作用促进了其可见光催化活性的提高.     

Preparation and characterization of low-amount Yb3+-doped TiO2 photocatalyst

The nanoparticles of Yb³⁺-doped (0.125 wt.%) and pure TiO₂ were prepared by an acid-catalyzed sol-gel method and characterized by X-ray diffraction, X-ray photoelectron spectroscopy, UV-Vis diffuse reflectance spectroscopy, and surface photovoltage spectroscopy; the specific surface of the samples was measured using the Brunauer-Emmett-Teller (BET) method. The photocatalytic degradation of methylene blue in aqueous solution was used as a probe reaction to estimate the photocatalytic activity of the prepared nanoparticles. The photocatalytic activity of Yb³⁺/TiO₂ composite nanoparticles is much higher than that of pure TiO₂. A low amount of Yb³⁺ in TiO₂ can inhibit the anatase-rutile phase transformation of TiO₂, prevent grain growth increasing the specific surface area, and favor the high-temperature stabilization of the pores. According to the surface voltage spectroscopy data, Tb³⁺-doping prevents recombination of photoinduced electrons and holes and improves the light absorption capacity of the particle surface. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1680–1685, October, 2006.     

Fe3+掺杂TiO2/凹凸棒复合光催化剂的制备和光催化活性

用酸催化溶胶-凝胶法制备了Fe³⁺掺杂TiO₂/凹凸棒（Fe³⁺-TiO₂/ATP）复合光催化剂,对其结构、微观形貌、光吸收性能和可见光下的光催化性能进行了表征。XRD和TEM测试结果表明,Fe³⁺-TiO₂/ATP具有较好的热稳定性,经450 ℃热处理后的ATP晶体结构基本保持不变,锐钛矿TiO2均匀的分布在ATP表面,TiO2颗粒之间无团聚,且平均粒径小于纯TiO₂。UV-Vis-DRS测试结果表明,Fe³⁺的掺杂可明显增强复合光催化剂对可见光的吸收,光响应范围拓展到了整个紫外-可见光区。在可见光下,Fe³⁺-TiO₂/ATP复合光催化剂对亚甲基蓝具有很好的催化降解活性。Fe³⁺-TiO₂/ATP的反应速率常数分别为TiO₂/ATP、P25和纯TiO2的1.37、4.83和6.51倍。复合光催化剂的沉降性能优于纯TiO2和P25,易于分离。     

Photocatalytic Activity of High Aspect Ratio TiO2 Nanorods

In this article, TiO₂ nanorods (aspect ratio >20) were prepared through a polyol process and doped with metal ions (Cu²⁺, Ni²⁺, Fe³⁺, and Cr³⁺). Compared with TiO₂ nanoparticles, the TiO₂ nanorods displayed relatively higher photocatalytic activity for the degradation of copper sulfophthalocyanine. Moreover, the photocatalytic activity was greatly enhanced when the metal ions were doped in the TiO₂ nanorods.     

Gd3+掺杂TiO2纳米复合材料的可见光响应性能

采用溶胶-凝胶技术,在钛酸四丁酯(TBOT)的水解过程中,加入硝酸钆(Gd(NO₃)₃),得到具有可见光响应活性的Gd³⁺/TiO₂复合材料。应用TEM、XRD、TG-DTA和UV-Vis等手段对纳米TiO₂复合材料进行了表征。当Gd³⁺的掺杂量为0.5%时,Gd³⁺/TiO₂复合材料在550 nm附近产生宽强吸收带。Gd³⁺进入TiO₂晶格中,形成了新的掺杂能级(E_g=1.27 eV)。适量Gd³⁺掺杂的纳米TiO₂复合材料的光催化性能优于纯TiO₂粉体材料。     

Synthesis of Fe<Superscript>3+</Superscript> doped ordered mesoporous TiO<Subscript>2</Subscript> with enhanced visible light photocatalytic activity and highly crystallized anatase wall

Fe³⁺ doped mesoporous TiO₂ with ordered mesoporous structure were successfully prepared by the solvent evaporation-induced self-assembly process using P123 as soft template. The properties and structure of Fe³⁺ doped mesoporous TiO₂ were characterized by means of XRD, EPR, BET, TEM, and UV–vis absorption spectra. The characteristic results clearly show that the amount of Fe³⁺ dopant affects the mesoporous structure as well as the visible light absorption of the catalysts. The photocatalytic activity of the prepared mesoporous TiO₂ was evaluated from an analysis of the photodegradation of methyl orange under visible light irradiation. The results indicate that the sample of 0.50%Fe–MTiO₂ exhibits the highest visible light photocatalytic activity compared with other catalysts.     

Visible light photocatalytic activity and Photoelectrochemical property of Fe-doped TiO<Subscript>2</Subscript> hollow spheres by sol–gel method

Fe-doped TiO₂ hollow spheres (Fe-THs) were synthesized by sol–gel process using carbon spheres as templates. The prepared samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), UV–vis diffuse reflectance spectrum (DRS), N₂ adsorption–desorption isotherms, Electron paramagnetic resonance (EPR) spectroscopy and Photoluminescence emission spectroscopy (PL). UV–vis spectra showed that Fe³⁺ doping could extend the absorption edge to the visible region. EPR spectra showed that Fe³⁺ was incorporated into the crystal lattice of TiO₂, which could inhibit the recombination of photo-induced electron–hole pairs and improve the photocatalytic activity. The photocatalytic activities of the prepared samples were evaluated for the degradation of dye Reactive Brilliant Red X-3B (C.I. reactive red 2) under visible light irradiation. The results indicated that Fe³⁺ doping sample showed the highest photocatalytic activity with an optimal doping concentration of 0.50 wt%. The recycle ability of the Fe-THs was also investigated. After 5 cycles, the degradation rate was still higher than 90%, decreased by only 6.36% compared to the first cycle. Moreover, in order to characterize the electron-transferring efficiency in the process of photocatalysis reaction, a photocurrent-time spectrum was examined by anodic photocurrent response.     

Fe2BiTaO7纳米催化剂的组织结构及光催化性能

用固相反应合成法合成了光催化剂Fe₂BiTaO₇,通过XRD、SEM、TEM、紫外-可见漫反射等表征方法对其组织结构及光催化性能进行了研究.结果表明Fe₂BiTaO₇为立方晶系烧绿石结构,空间群为Fd₃m,禁带宽度为1.72eV.通过比较Fe₂BiTaO₇、P₂₅TiO₂、掺氮TiO₂和Bi₂InTaO₇的可见光光催化降解罗丹明B,发现Fe₂BiTaO₇降解效果及催化活性均高于其它催化剂,并且Fe₂BiTaO₇降解罗丹明B效率是掺氮二氧化钛的1.5倍.Fe₂BiTaO₇降解罗丹明B的曲线符合一级动力学,一级动力学常数为0.02293 min^-1.研究了罗丹明B可能的降解路径和Fe₂BiTaO₇在可见光下降解苯酚的效果.Fe₂BiTaO₇(可见光)光催化剂系统适用于纺织工业废水处理.     

Microstructures and photocatalytic properties of Ag and La surface codoped TiO2 films prepared by sol–gel method

Ag⁺ and La³⁺ surface codoped TiO₂ films were successfully prepared by the improved sol–gel and doping processes. The as-prepared specimens were characterized using differential thermal analysis-thermogravimetry (DTA–TG), X-ray diffraction (XRD), high-resolution field emission scanning electron microscopy (FE-SEM), X-ray energy dispersive spectroscopy (EDS), Brunauer–Emmett–Teller (BET) surface area, Photoluminescence spectrum (PL) and UV–vis diffuse reflectance spectroscopy. The photocatalytic activities of the films were evaluated by degradation of an organic dye in aqueous solution. The results of XRD, FE-SEM and BET analyses indicated that the TiO₂ films were composed of nano-particles or aggregates with a size of less than 10 nm. With the codoping of Ag⁺ and La³⁺, TiO₂ films with high photocatalytic activity and clearly responsive to the visible light were obtained. The improvement mechanism by ions doping was also discussed.     

原位红外光谱法研究La/TiO2对有机污染物的光催化降解

本工作采用改进的溶胶-凝胶法和浸渍法制备了TiO₂掺杂稀土离子La³⁺的La/TiO₂光催化剂，运用XRD、N₂吸附脱附、紫外可见漫反射光谱(DRS)、表面光电压谱(SPS)等手段进行表征，同时利用原位红外技术考察了La/TiO₂样品光催化降解乙烯、丙酮、苯的气-固相光催化氧化反应，对其光催化降解有机污染物的过程进行了研究。结果表明，TiO₂经适量La³⁺掺杂后，锐钛矿晶型的含量增加，晶粒度减小，比表面积增大，禁带宽度增加，表面光电压信号增强，光生电子-空穴对有效分离；La/TiO₂样品对乙烯、丙酮、苯的光催化性能与纯TiO₂相比均有不同程度的改善，乙烯可以被光催化氧化完全矿化生成CO₂，而丙酮被光催化氧化可能生成中间产物丙酸，苯被光催化氧化可能生成中间产物苯酚和苯醌。     

稀土离子Tm3+掺杂Bi2WO6的可见光催化性能

以Na₂WO₄·2H₂O和Bi（NO₃）₃·5H₂O为主要原料,采用水热法合成了稀土离子Tm³⁺掺杂的Bi₂WO₆光催化剂。采用XRD、SEM、TEM、Raman、PL、DRS研究了Tm³⁺掺杂Bi₂WO₆的物相,微观形貌和可见光催化性能。结果表明,Tm³⁺掺杂有效提高了Bi₂WO₆的光催化性能,当掺杂量为6%时,样品的光催化性能最好,可见光照射30 min后,对罗丹明B的降解效率达到91.27%,而可见光照射5 h后,对焦糖色素的降解效率达45.25%。与未掺杂Bi₂WO₆相比,分别提高了27.78%和35.22%。     

原位红外光谱法研究Gd3+掺杂TiO2光催化降解乙烯性能

随着环境污染的日益严重,寻求环境友好、节能、高效的污染治理技术已成为各国科学研究者致力的目标。以TiO2半导体为主的多相光催化氧化技术因与传统污染处理技术相比具有许多优点而倍受青睐,但是,目前以TiO2为基础的光催化技术还存在量子效率低、太阳能利用率低等技术难题[1,2     

Study on catalyst carrier nano-α-alumina with high specific surface area

A nano-alumina with high specific area was prepared using a homogeneous precipitation method with titanium dioxide and barium oxide as modifying additives. Results showed that 5 wt% TiO₂ or BaO added in the alumina gels can decrease the particle size and increase the specific area, but excessive TiO₂ or BaO could deteriorate the properties of α-Al₂O₃. __________ Translated from Journal of Shandong University of Technology (Natural Science Edition), 2007, 27(3): 23–26 [译自: 山东理工大学学报(自然科学版)]     

Characterization and activity of visible-light-driven TiO2 photocatalyst codoped with nitrogen and cerium

Nitrogen and cerium codoped TiO₂ photocatalysts were prepared by a modified sol-gel process with doping precursors of cerium nitrate and urea, and characterized by X-ray diffraction (XRD), thermogravimetry-differential scanning calorimetry (TG-DSC), X-ray photoelectron spectra (XPS) and ultraviolet-visible light diffuse reflectance spectra (UV-vis DRS). Results indicate that anatase TiO₂ is the dominant crystalline type in as-prepared samples, and CeO₂ crystallites appear as the doping ratio of Ce/Ti reaches to 3.0 at%. The TiO₂ starts to transform from amorphous phase to anatase at 987.1 K during calcination, according to the TG-DSC curves. The XPS show that three major metal ions of Ce³⁺, Ce⁴⁺, Ti⁴⁺ and one minor metal ion of Ti³⁺ coexist on the surface. The codoped TiO₂ exhibits significant absorption within the range of 400-500 nm compared to the non-doped and only nitrogen-doped TiO₂. The enhanced photocatalytic activity of the codoped TiO₂ is demonstrated through degradation of methyl orange under visible light irradiation.