A Two-dimensional Lanthanide Coordination Framework with a New Amide-type Tripodal Ligand, 2,2′,2＂-Nitrilotris{[（2′- benzylaminoformyl）phenoxy]ethyl}amine

The La(III) complex with a new amide‐type tripodal ligand,2,2′.2″‐nitrilotris{[(2′‐benzylaminofomyl)‐phenoxylethyl)amine (L), was synthesized and characterized by X‐ray crystallographic analysis. Crystal data: C₄₈H_55.50LaN₇O_18.75, M_r=1169.40, monoclinic. space group, P2₁/n, a= 1.0644(3) nm. b=2.3889(5) nm, c= 2.1917(5) nm, β=90.65°, V=5.573(2) nm³, Z=1, D_c=1.394 g°cm^?3, R₁=0.0487, wR [1>2s?(I)]=0.1266. The results reveal that each La(III) ion binds to 9 oxygen atoms, three of which belong to carbonyl groups from three tripodal ligands and six to three bidentate nitrate groups and a two‐dimensional sheet of 4.8² networks is assembled by metal‐ligand coordination interaction. L, a heptadentate compound, merely acts as a tridentate bridging spacer due to its steric hindrance and links the La(III) ions as three‐connected nodes.     

三氯化镱催化丙烯酸酯与呋喃成环反应的研究

D iels-A lder反应具有立体专一性和很好的区域选择性,已被大量应用于天然有机化合物、香料、药物等的合成中。一般说来,D iels-A lder反应在加热条件下即能发生,但加热往往导致反应的区域选择性和立体专一性下降,而研究表明,路易斯酸催化下的D iels-A lder反应在不同程度上表现出或反应速度加快,或产率提高,或条件温和,尤其是区域选择性和立体专一性得到提高等良好特性。呋喃类化合物由于呋喃环所具有的芳香性而较难与一般的亲双烯发生D iels-A lder反应。如呋喃和丙烯酸甲酯在加热条件下反应2~3个月,产率只能达到50%,且反应温度的提高…     

Theoretical study of the reaction of Sc with SCO in gas phase

In order to elucidate the mechanism of reaction M⁺ + SCO, both triplet and singlet potential energy surfaces (PESs) for the reaction of Sc⁺ + SCO have been theoretically investigated using the DFT (B3LYP/6-311+G*) level of theory. The geometries for reactants, intermediates, transition states and products were completely optimized. All the transition states were verified by the vibrational analysis and the intrinsic reaction coordinate calculations. The involving potential energy curve-crossing dramatically affects reaction mechanism, reaction rate has been discussed, and the crossing points (CPs) have been localized by the approach suggested by Yoshizawa et al. The present results show that the reaction mechanism are insertion–elimination mechanism both along the C–S and C–O bond activation branches, but the C–S bond activation is much more favorable in energy than the C–O bond activation. All theoretical results not only support the existing conclusions inferred from early experiment, but also complement the pathway and mechanism for this reaction.     

甲烷—空气燃烧中NOx生成的简化模型研究

用特征值－特征向量法对甲烷－空气燃烧时ＮＯＸ生成的化学反应机理进行了简化，得到了仅由１５个基元以应组成的简化反应模型。对比计算结果表明，该模型能在较宽燃空比内与全面模型很好吻合，因而可望用于燃烧过程数值模拟时对ＮＯＸ生成的预测     

耐硫催化剂上合成混合醇的研究

通过改进制备方法和添加助剂，用浸渍－热分解法制得了具有高活性和高选择性的MoS2-K-C型耐硫低碳混合醇催化剂。在8.0-11.0MPa,290-340℃，6000-12000h^-1,H2 S 浓度为100ppm 左右的条件下，在直流反应器中对催化剂进行了性能测试，结果表明，醇得率为0.14-0.47gROH(gcat·h)^-1，选择性为89-98%。同时，考察了操作条件对催化剂性能的影响。1042h的试验，证明催化剂具有很好的稳定性。     

氟硼二吡咯类阳离子荧光探针的研究进展

荧光探针提供了方便、快捷、廉价的分析测试手段,并具有很高的灵敏度和选择性,因而在分析化学、临床生物化学、医学以及环境科学等领域有广泛的应用前景.氟硼二吡咯(BODIPY)是一种光物理和光化学性能优异的荧光染料,本文综述了近年来BODIPY类阳离子荧光探针的最新研究进展和发展趋势.     

水热法合成Ce0.67Zr0.33O0.2固溶体研究

采用两种不同前驱体通过水热法合成了Ce0.67Zr0.33O0.2固溶体,并通过XRD,BET,TPR等手段考察了样品的相结构,比表面及还原特性.结果表明,在180℃,12 h的水热条件下,以共沉淀产物为前驱体所制得的Ce0.67Zr0.33O0.2固溶体比表面积较高,但存在一定程度的相分离;以凝胶产物为前驱体制得的Ce0.67Zr0.33O0.2固溶体结构更完整,具有良好的还原特性及热稳定性.     

紫外分光光度法测定甲砜霉素片的含量

根据甲砜霉素的紫外吸收特征,建立了以乙腈-水为溶媒、(225±1)nm为最大吸收波长的紫外分光光度法。方法的线性范围为0.5～25.0μg/mL,平均回收率为99.92％,RSD为0.30％。用对照品比较法测定5批甲砜霉素片的含量,并与中国药典方法的测定结果进行比对,结果表明,两种方法的测定结果基本一致。     

LiCaBO3的合成和LiBO2-CaO二元体系相图

某些无水硼酸盐具有熔点高、耐潮解、损伤阈值高、光学透过波段好等优点,在材料科学领域中一直受到人们的注视。陈创天等首次得到新型紫外倍频材料—低温相偏硼酸钡。之后,又合成了具有倍频效应的晶体材料α-LiCdBO_3。