α-取代氨基氟代苯基膦酸酯衍生物的合成、晶体结构与抗癌活性

利用席夫碱与亚磷酸酯反应, 合成了新型O,O'-二烷基-α-(6-甲氧苯并噻唑-2-基氨基)-4-氟苯基膦酸酯化合物, 结构经元素分析, IR, ¹H NMR, ¹³C NMR和X单晶衍射确认. X单晶衍射测试结果表明: 化合物3d分子属于四面体晶系, 空间群I4(1)/a, a＝2.1055(3) nm, b＝2.1055(3) nm, c＝2.0521(5) nm, α＝90.00°, β＝90.00°, γ＝90.00°, V＝0.9098(3) nm³, Z＝16, D_c＝1.321 mg/m³, ＝0.250 mm^－1, F(000)＝3808. 化合物还存在着1个分子内氢键[N(2)—H(2)…O(1)]. 生物测定表明化合物3f在20 g/mL浓度下对PC3细胞的抑制率为84.3%.     

α-(2-苯并噻唑氧基)烃基膦酸酯的合成性质和生物活性

为探索α-芳(杂 环)磷酸衍生物的生物活性,寻求含磷农药的新母体,合成了十六个未见文献报道的α-(苯并噻唑-2-氧代)烃基膦酸衍生物,所有化合物的结构均IR,HNMR, 元素分析等确证,并对生物活性进行了初步的研究.     

Comparison study of several numerical integration schemes used in calculations of density functional theory

Several numerical integration schemes for the evaluation of matrix elements in density functional theory calculations have been studied and compared by computational practice. The best scheme was found to be the combination of the atomic partition function proposed by Becke with the scaled generalized Gauss-Laguerre quadrature formula for radial integration suggested by Yang, which achieve the highest convergence rate to the numerical integration. With the same number of integration points, the accuracy of the calculated results by this scheme is higher by 1 to 2 orders of magnitudes than that by other schemes. The reason for achieving higher accuracy by this scheme has been proposed preliminarily.     

微波诱导低级醇的等离子体化学反应

微波诱导低级醇的等离子体化学反应王真，洪品杰，张承聪，戴树珊（云南大学化学系，昆明，６５００９１）关键词微波，等离子体化学，低级醇等离子体能产生大量的活性自由基、亚稳态粒子和激发态离子，它所包含的能量传递过程和反应过程不仅与反应碰撞理论有关，而且还涉...     

美国NGSS科学与工程实践构架与化学教学案例——影响化学反应速率的因素

美国《新一代科学标准》（NGSS）强调科学实践的重要性并提出科学与工程实践的关键要素，不仅为科学实践的具体实施提供了方向而且使科学实践的评价标准更加明确。在介绍NGSS科学与工程实践的构架基础上，以“影响化学反应速率的因素”为例分析了科学与工程实践的关键要素在教学中的反映及实施特点，并基于案例分析提出对我国中学化学教学过程设计的借鉴与启示。     

Ion Product of Pure Water Characterized by Physics-Based Water Model

Pure water has been characterized for nearly a century, by its dissociation into hydronium (H₃O)¹⁺ and hydroxide (HO)^1- ions. As a chemical equilibrium reaction, the equilibrium constant, known as the ion product or the product of the equilibrium concentration of the two ion species, has been extensively measured by chemists over the liquid water temper-ature and pressure range. The experimental data have been nonlinear least-squares fitted to chemical thermodynamic-based equilibrium equations, which have been accepted as the industrial standard for 35 years. In this study, a new and statistical-physics-based water ion product equation is presented, in which, the ions are the positively charged protons and the negatively charged proton-holes or prohols. Nonlinear least squares fits of our equation to the experimental data in the 0-100 ℃ pure liquid water range, give a factor of two better precision than the 35-year industrial standard.     

两种测定果汁中钾磷含量方法的比较与分析

采用微波消解-等离子体发射光谱法同时测定果汁中K、P含量,优化了实验所需的各种条件。与国家标准方法湿法消解-分光光度法的测定结果作了实验比较,结果表明本实验方法更简单、高效,节省了样品的前处理时间,减小了最终结果的误差。该法灵敏度高、线性范围宽、加标回收率高,结果令人满意。     

HL-2M 真空室保温层设计及安装

基于 HL-2M 真空室烘烤保温要求，通过有限元分析和原型件实验确定采用陶瓷纤维与纳米级微孔材 料组合作为 HL-2M 真空室保温材料。在 30℃时，保温层的导热系数小于 0.027W⋅m⁻¹·℃⁻¹；300℃时，导热系数 小于 0.038W⋅m⁻¹·℃⁻¹。在保温层厚度 25mm、热面温度 300℃且达到稳态时，冷面可控制在 85℃以下，线圈侧的 温度低于 60℃，整体热损失小于 12kW，满足 HL-2M 真空室烘烤需求。      

聚变实验堆真空室壳体成型残余应力分析

为了了解聚变实验堆真空室壳体表面残余应力的分布以及退火工艺对残余应力的影响，通过模拟分析和实验检测两种方式对不锈钢316LN冷压曲面和热压曲面残余应力进行研究，获得退火前后曲面表面残余应力的大小，得到冷压曲面和热压曲面残余应力的分布以及退火工艺对残余应力分布的影响。研究结果为分析成型工艺提供数据支撑，对中国聚变工程实验堆真空室的研究与制造具有重要意义。