实验室废液的回收及效果评价——以“铬废液回收及评价”为例

This paper introduces an experiment about waste liquid recovery and effect evaluation in laboratory. Through this experiment, the basic operations of crystal preparation, chemical analysis and instrumental analysis are further consolidated. At the same time, it allows students to experience a series of possible problems of condition selection and control in the process of waste liquid treatment. We hope to improve the students' ability to analyze and solve problems, enhance their interest in learning, and strengthen their humanistic education.     

Synthesis of cationic guar gum-graft-polyacrylamide at low temperature and its flocculating properties

Acrylamide grafted cationic guar gum (CGG-g-PAM), induced by ceric ammonium sulfate, was synthesized using aqueous polymerization technique at 10 °C and the flocculation property was studied with high-turbidity tobacco wastewater (NTU > 4500). Thus five grades of graft copolymers were obtained through alteration of initiator and monomer concentrations in order to understand the effect of molecular weight on flocculation. The grafted copolymer was characterized by FTIR and SEM. Study of DTG demonstrated that CGG-g-PAM had better heat-resistant performance than guar gum, cationic guar gum (CGG) and polyacrylamide. The dosage of polyaluminium chloride (PAC) and CGG-g-PAM, pH value and molecular weight were considered to be the factors that can influence flocculation efficiency. The result showed best flocculation efficiency occurs at pH 5 when the dosage of CGG-g-PAM and PAC are 3.6 ppm and 120 ppm, respectively. The percentage of turbidity and COD removal are 98% and 24% correspondingly, and its flocculating efficiency prevails over that of CGG and cationic polyacrylamide (CPAM).     

Speciation analysis of aluminium(III) in natural waters and biological fluids by complexing with various catechols followed by differential pulse voltammetry detection

The biological effects of aluminium have received much attention in recent years. Speciation of Al is of basic relevance as it concerns its reactivity and bioavailability. A differential pulse voltammetry (DPV) procedure is proposed for speciation analysis of Al(III) in natural waters and biological fluids using six catechols (L-dopa, dopamine, epinephrine, norepinephrine, caffeic acid and o-benzenediol) as electroactive ligands. The decrease of the DPV anodic peak current for each catechol ligand is linear with the increase of Al concentration. This speciation analysis idea is based on the measurement of the complexation capacity, namely, different affinities of Al(III) for catechols and organic ligands under two pH conditions. The labile monomeric Al fraction (mainly inorganic aluminium) is determined at pH 4.6, while the total monomeric Al fraction is determined at pH 8.5. The principle for Al(III) speciation analysis by an electrochemical method is discussed. This sensitive and simple fractionation method is successfully applied to the speciation analysis of Al in natural waters and the results agree well with those of Driscoll's method. The speciation analysis of Al in biological fluids is also explored and the results are compared with those obtained by ultrafiltration and dialysis. Compared with other speciation protocols the electrochemical method possesses some remarkable advantages: rapidity, high sensitivity, cheap instrumentation and a simple operation procedure.     

Anisotropic hydrogel thickness gradient films derivatized to yield three-dimensional composite materials

We report the preparation of in-plane density gradients of amino-terminated molecules and gold particles through derivatization of laterally varying thickness gradients of poly(acrylic acid) (PAA) or poly(acrylamide) (PAAm) films. PAA and PAAm gradients were formed by Zn(II)-catalyzed electropolymerization of acrylic acid (AA) or acrylamide (AAm) in the presence of an in-plane electrochemical potential gradient applied to Au or indium-tin-oxide (ITO) working electrodes. PAA thickness gradients were converted into density gradients of fluorocarbons or biocompatible groups by derivatizing with NH(2)CH(2)(CF(2))(6)CF(3) or an Arg-Gly-Asp (RGD)-containing peptide, respectively. X-ray photoelectron spectroscopy (XPS) and XPS imaging were used to characterize the modified PAA gradients. Transition regions as narrow as 104 mum were achieved for fluorocarbon gradients. PAAm gradients were treated with gold particles to form a density gradient of gold particles. Surface plasmon resonance imaging and scanning electron microscopy (SEM) as well as UV-visible absorption measurements were used to characterize the gold particle density gradients. It is likely that the gold particles were attached both on the surface and inside the PAAm film.     

1,2,2,6,6-五甲基哌啶醇对聚丙烯光稳定作用的研究

<正> 关于受阻胺类光稳定剂的稳定作用机理,是近年来光稳定研究领域中广泛探讨的课题,我们用异辛烷溶液研究了1,2,2,6,6-五甲基哌啶醇的光稳定作用,结果已在前文报道,本工作是上述研究的继续,主要研究五甲基哌啶醇对聚丙烯膜的光稳定作用。     

Solid-state nanopores for ion and small molecule analysis

Solid-state nanopore in analytical chemistry has developed rapidly in the 1990s and it is proved to be a versatile new tool for bioanalytical chemistry. This review focuses on the analysis of ions and small molecules with nanopores including nanopipettes, polymer film nanopores, Si₃N₄ nanopores, graphene nanopores, MoS₂ nanopores and MOFs.     

烟酸对酸性硫酸盐体系铜电沉积的影响

对溶液A: 0.8 mol•L－1硫酸铜,0.6 mol•L－1硫酸,5.0×10－5 mol•L－1氯离子,1.0×10－4 mol•L－1聚乙二醇的溶液,溶液B:在溶液A中加入2.0×10－2 mol•L－1烟酸,pH为0.5,运用循环伏安和计时安培法研究玻碳电极上铜的电沉积行为.结果表明,铜的电沉积过程经历了晶核形成过程,其电结晶按瞬时成核和三维生长方式进行.烟酸的加入对铜的电沉积具有阻化作用,但不改变铜的电结晶机理.沉积层的X射线衍射表明Cu为面心立方结构,在烟酸存在下沉积层出现(220)高择优取向,这可能是烟酸在Cu(220)晶面上发生强烈吸附作用的结果.     

Lattice Thermal Transport in the Homogeneous Cage-Like Compounds Cu3VSe4 and Cu3NbSe4: Interplay between Phonon-Phase Space,Anharmonicity, and Atomic Mass

Understanding the correlation between crystal structure and thermal conductivity in semiconductors is very important for designing heat-transport-related devices, such as high-performance thermoelectric materials and heat dissipation in micro-nano-scale devices. In this work, the lattice thermal conductivity ( ) of the cage-like compounds Cu₃VSe₄ and Cu₃NbSe₄ was investigated by experimental measurements and first-principles calculations. The experimental of Cu₃NbSe₄ is approximately 25 % lower than that of Cu₃VSe₄ at 300 K. The relevant important physical parameters, including the sound velocity, heat capacity, weighted phonon phase space (W), and third-order force constants along with atomic mass were theoretically analyzed. It is found that W is the dominant parameter in determining the , and the other factors only play a minor role. The physical origin is the relatively “soft” lattice of Cu₃NbSe₄ with heavier atomic mass. This research provides deep insight into the correlation between the thermal conductivity and crystal structure and paves the way for discovering high-performance thermal management device and thermoelectric materials with intrinsically low .     

Micellization and gelation of aqueous solutions of star-shaped PEG-PCL block copolymers consisting of branched 4-arm poly(ethylene glycol) and polycaprolactone blocks

Star-shaped block copolymers consisting of non-toxic poly(ethylene glycol) and biodegradable polycaprolactone ((PEG5K-PCL)₄) were synthesized by ring-opening polymerization of the ε-caprolactone monomer with hydroxyl-terminated 4-armed PEG as initiator. These biodegradable, amphiphilic star block copolymers showed micellization and sol-gel transition behaviors in aqueous solution with varying concentration and temperature. In the dilute aqueous solutions of star block copolymers, micellization behavior occurred over specific concentration. The 1,6-diphenyl-1,3,5-hexatriene (DPH) solubilization method was used to determine the critical micellization concentration (CMC) of star block copolymers. The obtained micelle size increased with increasing hydrophobic PCL block length. In high-concentration solutions, the star block copolymers showed temperature-sensitive sol-gel transition behavior. The morphology of the micelle and gel was investigated by atomic force microscopy (AFM). As a result, the micelles showed a core-corona spherical structure at concentration near CMC, while the gel showed a mountain-chain-like morphology picture. It was proposed that with increasing the micelle concentration the worm-like micelle clusters formed firstly and the gel was constructed by the packing of micelle clusters.     

相转移催化合成香料烟酮及中间体异佛尔酮

报道了香料烟酮（2-羟基-3，5，5-三甲基-2-环戊烯酮）及中间体异佛尔酮的合成，首先用4-甲基-3-戊烯-2-酮与乙酰乙酸乙酯，在相转移催化剂Et3N^ CH2PhCl^-和EtONa/EtOH条件下合成中间体异佛尔酮，异佛尔酮在碱性条件下被H2O2氧化成2,3-环氧异佛尔酮，2，3-环氧异佛尔酮在酸性条件下反应生成烟酮，对烟酮的IR，^1H NHR谱进行了分析。