Control of Codimension-2 Bautin Bifurcation in Chaotic Lu System

In this paper, we design a feedback controller, and analytically determine a control criterion so as to control the codimension-2 Bautin bifurcation in the chaotic Lfi system. According to the control criterion, we determine a potential Bautin bifurcation region （denoted by P） of the controlled system. This region contains the Bautin bifurcation region （denoted by Q） of the uncontrolled system as its proper subregion. The controlled system can exhibit Bautin bifurcation in P or its proper subregion provided the control gains are properly chosen. Particularly, we can control the appearance of Bautin bifurcation at any appointed point in the region P. Due to the relationship between Bantin bifurcation and Hopf bifurcation, the control scheme thereby is also viable for controlling the creation and stability of the Hopf bifurcation. In the controller, there are two terms： a linear term and a nonlinear cubic term. We show that the former determines the location of the Hopf bifurcation while the latter regulates its criticality. We also carry out numerical studies, and the simulation results confirm our analyticai predictions.     

Effect of an Arbitrary Dust Size Distribution Dust Particles for Vortex-Like Ion Distribution Dusty Plasma

In order to investigate the effect of an arbitrary dust size distribution for vortex-like ion distribution dusty plasma, we use a reasonable polynomial-expressed function to represent an arbitrary dust size distribution. The numerical results of linear dispersion relation, nonlinear solitary wave amplitude, width and velocity for polynomial expressed dust size distribution dusty plasma with vortex-like ion distribution have been studied.     

Observation of E×B Flow Velocity Profile Change Using Doppler Reflectometry in HL-2A

A broadband, O-mode sweeping Doppler reflectometry designed for measuring plasma E×B flow velocity profiles is operated in HL-2A. The main feature of the Doppler reflectometry is its capability to be tuned to any selected frequency in total waveband from 26-40 GHz. This property enables us to probe several plasma layers within a short time interval during a discharge, permitting the characterization of the radial distribution of plasma fluctuations. The system allows us to extract important information about the velocity change layer, namely its spatial localization. In purely Ohmic discharge a change of the E×B flow velocity profiles has been observed in the region for 28 〈 r 〈 30cm if only the line average density exceeds 2.2×10^19 m^-3. The density gradient change is measured in the same region, too.     

A Continuous-Wave Ho:YAlO3 Laser with Output 8.5W Pumped by a 1.91μm Laser at Room Temperature

A cw high efficient Ho:YAlO₃ laser pumped by 1.91μm diode-pumped Tm:YLF laser at room temperature is realized. The maximum output power reaches 8.5W when the incident pump power is 15.6W. The slope efficiency is 63.7%, and the Tm:YLF to Ho:YAP optical conversion efficiency is 54.5%. The laser wavelength is 2118.3nm when the transmission of output coupler is 30%. The beam quality factor is M²~1.39 measured by the traveling knife-edge method.     

杀鼠剂溴鼠灵与牛血清白蛋白相互作用的光谱法研究

利用紫外吸收光谱,荧光光谱和同步荧光技术研究了牛血清白蛋白和杀鼠剂溴鼠灵的相互作用.结果表明溴鼠灵对牛血清白蛋白的内源荧光有较强的猝灭作用,两者形成了新的复合物,属于静态荧光猝灭,并且伴随着分子内的非辐射能量转移.通过双倒数及双对数曲线计算了不同温度下的猝灭速率常数Ksv,结合位点数n,结合常数KA,并根据相对应的热力学参数判断二者之间主要为疏水作用力.依据F(o)rster非辐射能量转移理论求出了溴鼠灵和蛋白质问的结合距离r,确定了溴鼠灵在蛋白质上的结合位置.在20和30℃时r分别为2.84和2.87 nm.同步荧光光谱显示,与溴鼠灵作用后BSA分子的二级结构发生了改变.初步探讨了二者的结合模式与作用机制:溴鼠灵分子通过静电引力靠近蛋白质的疏水腔,并以疏水作用力与疏水腔中的氨基酸残基发生相互作用,导致色氨酸残基微环境极性变化.其结果不但阻止了酪氨酸残基与色氨酸残基间的能量转移,而且使色氨酸残基与溴鼠灵分子间产生非辐射能最转移,从而猝灭BSA的内源荧光.     

四气门汽油机分层EGR的试验研究

针对可以产生较强滚流运动的1.6 L四气门产品汽油机,设计了一套独特的分层废气再循环(EGR)装置。通过废气导入管将废气引到进气阀处,利用缸内气体滚流运动,实现废气与新鲜可燃混合气分层。在发动机台架上通过试验详细地研究该分层EGR装置对汽油机性能和燃烧的影响。试验结果表明,采用该装置后,相比于传统的EGR方式,EGR 率有所增加,在大量降低NOx排放同时,经济性有所改善, CO和HC排放有所降低,燃烧效率提高,但点火时刻应适当提前。     

BaAl12O19:Mn2+荧光粉的表面包覆与发光性能

采用传统的高温固相反应法合成出BaAl12O19：Mn^2 荧光粉,利用乳胶法对荧光粉颗粒表面包覆MgF2。对包覆过程中的反应物浓度、反应过程进行研究,得到最佳包覆条件,确定荧光粉表面包覆的制备工艺。通过X射线衍射、透射电镜图、红外光谱等对表面包覆的荧光粉颗粒的结构性能进行分析,并在彩色等离子体平板显示器(PDP)上进行涂屏老化实验。结果表明在BaAl12O19：Mn^2 荧光粉颗粒表面成功地包覆上MgF2层,包覆后的荧光粉的初始发光亮度下降1．6％,而老化8h后,包覆的荧光粉亮度衰减明显优于不包覆的材料。     

ZnO:Al/p-Si的接触特性

利用射频磁控溅射制备了ZnO：Al／p—Si接触,并对其进行C-V和I-V特性的77～350K变温测量。并对未热退火和800℃热退火两种样品的测量结果进行了对比分析。结果发现,未经热退火和经过热退火处理的样品在C—V和I-V特性上有很大差别。解释了两种样品的C—V和I-V测量结果的不同。对于未退火的样品,由于界面处的大量界面态的屏蔽作用,使得ZnO：Al／p—Si异质结的C—V曲线发生畸变。经800℃热退火,ZnO：Al／p—Si异质结的C—V特性恢复正常,说明热退火已经消除了异质结中的界面态和缺陷态。研究表明ZnO：Al／p—Si异质结经适当热退火处理有更好的整流特性同时对光致发光也更有利。     

一种基于光学三角法的形貌测量系统

提出了一种基于光学三角原理的物体形貌测量方法。从理论上推导出了被测点的相对高度与像点距离的线性公式,通过这个公式可以由像点距离计算出被测点的高度。在实际的测量系统中,通过工作台的精确位移和像点的移动距离可标定出线性公式中的未知系数。把被测物体放在工作台上,先测出被测点的像的相对位移,然后再通过公式计算出被测点相对屏幕的距离。试验中测量了一个圆柱体上的一些点的三维坐标,通过这些数据绘出了圆柱体的三维形貌。     

图像边缘检测方法研究综述

图像的边缘是图像最基本也是最重要的特征之一。边缘检测一直是计算机视觉和图像处理领域的经典研究课题之一。图像分析和理解的第一步常常是边缘检测。边缘检测的目的是去发现图像中关于形状和反射或透射比的信息,是图像处理、图像分析、模式识别、计算机视觉以及人类视觉的基本步骤之一。其结果的正确性和可靠性将直接影响到机器视觉系统对客观世界的理解。对一些传统的边缘检测方法和近年来广泛收到关注的边缘检测算法进行了简单介绍。综述中只涉及到检测方面,而没有讨论滤波、边缘定位、算法的复杂程度和边缘检测器性能的评价。