Microdialysis sampling coupled to HPLC for transdermal delivery study of ondansetron hydrochloride in rats

The transdermal delivery of ondansetron hydrochloride (ON) solution in propylene glycol (PG) with a widely used penetration enhancer, oleic acid (OA), was studied in rats by a microdialysis sampling technique. Dialysate samples collected from the probe were directly injected into the HPLC system without any pre-treatment and no interference occurred in the blank sample. A good linearity between the standard concentrations and peak areas within the calibration range was achieved. In vivo recovery (32.52 +/- 1.8%) of the probe was assessed with the retrodialysis method, which was used to calculate the ON concentration in the dermis. Oleic acid at the concentrations of 2% and 5% (w/v) increased the steady-state delivery rate from 0.001 to 0.030 and 0.058 microg/h, respectively. OA proved to be an effective enhancer for transdermal delivery of ON in rats.     

硫酸介质中Ti／SnO2／PbO2析氧阳极的研究

由于硫酸溶液具有高的电导、一般条件下性质稳定、价格相对低廉等优点，所以电化学合成大多在硫酸溶液中进行．阳极析氧是电化学合成不可避免的阳极过程．但因硫酸的强腐蚀性，以及从阳极析出的氧的强氧化性，使得能满足工业生产的阳极材料很缺乏．自１９５０年荷兰Ｈｅｎ...     

细胞动力学研究VIII.Na2SeO3对黑根菌作用特征

The Characteristics of the action of Na2SeO3 on Rhizopus nigrocans has been studied by means of microcalorimetry, the relationship between growth rate constants and the concentration of Na2SeO3 is
k=0.03608exp[-0.003608(c+8.60)2]
It was found that Na2SeO3 of low concentration has promoting action on the growth of Rhizopus nigrocans cells, and high concentration of Na2SeO3 has inhibitory action. The study has provided a lot of information on the bioaffect of selenium and the research of toxicology.     

Effect of surface mobility on the particle sliding along a bubble or a solid sphere

The sliding velocity of glass beads on a spherical surface, made either of an air bubble or of a glass sphere held stationary, is measured to investigate the effect of surface mobility on the particle sliding velocity. The sliding process is recorded with a digital camera and analyzed frame by frame. The sliding glass bead was found to accelerate with increasing angular position on the collector's surface. It reaches a maximum velocity at an angular position of about 100 degrees and then, under certain conditions, the glass bead leaves the surface of the collector. The sliding velocity of the glass bead depends strongly on the surface mobility of a bubble, decreasing with decreasing surface mobility. By a mobile surface we mean one which cannot set up resistive forces to an applied stress on the surface. The sliding velocity on a rigid surface, such as a glass sphere, is much lower than that on a mobile bubble surface. The sliding velocity can be described through a modified Stokes equation. A numerical factor in the modified Stokes equation is determined by fitting the experimental data and is found to increase with decreasing surface mobility. Hydrophobic glass beads sliding on a hydrophobic glass sphere were found to stick at the point of impact without sliding if the initial angular position of the impact is less than some specific angle, which is defined as the critical sticking angle. The sticking of the glass beads can be attributed to the capillary contracting force created by the formation of a cavity due to spontaneous receding of the nonwetting liquid from the contact zone. The relationship between the critical sticking angle and the particle size is established based on the Yushchenko [J. Colloid Interface Sci. 96 (1983) 307] analysis.     

与时俱进，不断开创物理化学课程建设新局面

As a necessary basic theory course for undergraduates majoring in chemistry, materials, pharmacy, chemical engineering, and biology, physical chemistry plays an important role in cultivating talents to meet the needs of social and economic development. Over the years, the teaching team of physical chemistry of East China University of Science and Technology has carried out the curriculum reform and innovation persistently based on "Team building as the foundation, resource building as the root, mode innovation as the soul, ability training as the origin". This paper will summarize our thinking and experience in striving for the first-class course from the aspects of first-class team construction, first-class resource construction, teaching connotation innovation, teaching mode exploration, and extract the experience that can be used as reference by teaching peers.     

细观等效理论预测再生混凝土宏观力学参数北大核心CSCD

预测分析再生混凝土各组分对再生混凝土宏观力学参数的影响是开展再生混凝土基本力学性能的一种方式.为了分析再生混凝土各组分对再生混凝土宏观力学参数的影响,根据再生混凝土的细观结构组成,建立了细观等效模型,利用扭转变形、细观夹杂理论、弹性等效思想和M-T模型方法,推导了由原生骨料、老界面层、老水泥砂浆、新界面层和新水泥砂浆等组成的再生混凝土的宏观力学参数预测模型.预测结果表明,随着再生骨料的取代率增加,水泥砂浆的含量不断增加,再生混凝土孔隙率也随之增大,导致再生混凝土的Poisson比随之增大,弹性模量、剪切模量和体积模量不断降低.模型的预测结果较好地反映了再生混凝土宏观力学参数随再生骨料取代率的增加不断变化的这一趋势,也为再生混凝土宏观力学参数的预测提供了一条简单实用的新方法,有利于再生混凝土基本力学性能的研究分析.     

旋转输液管动力稳定性理论分析北大核心CSCD

基于Lagrange原理和假设模态法建立了旋转输液管的动力学模型.通过降阶升维的方法求解系统的特征值问题,并分析了旋转输液管自由振动特性.得到了不同端部集中质量和转速下,系统特征值随流速升高的演变轨迹.揭示了临界流速随系统参数的变化规律.研究发现,内部流体的流动对旋转输液管动力学特性存在显著影响.在某些参数组合下,系统低阶模态能够形成不同形式的内共振关系.预示了旋转输液管模型蕴含丰富的动力学现象.     

A CS-AdaBoost-BP model for product quality inspection

Quality inspection is essential in preventing defective products from entering the market. Due to the typically low percentage of defective products, it is generally challenging to detect them using algorithms that aim for the overall classification accuracy. To help solve this problem, we propose an ensemble learning classification model, where we employ adaptive boosting (AdaBoost) to cascade multiple backpropagation (BP) neural networks. Furthermore, cost-sensitive (CS) learning is introduced to adjust the loss function of the basic classifier of the BP neural network. For clarity, this model is called a CS-AdaBoost-BP model. To empirically verify its effectiveness, we use data from home appliance production lines from Bosch. We carry out tenfold cross-validation to evaluate and compare the performance between the CS-AdaBoost-BP model and three existing models: BP neural network, BP neural network based on sampling, and AdaBoost-BP. The results show that our proposed model not only performs better than the other models but also significantly improves the ability to identify defective products. Furthermore, based on the mean value of the Youden index, our proposed model has the highest stability.

     

非全局Lipschitz条件下跳适应向后Euler方法的强收敛性分析

本文研究跳适应向后Euler方法求解跳扩散随机微分方程在非全局Lipschitz条件下的强收敛性.通过克服方程非全局Lipschitz系数给收敛性分析带来的主要困难,我们成功地建立了跳适应后向Euler方法的强收敛性结果并得到相应的收敛率.最后,我们通过数值试验对前文所得理论结果做进一步的验证.     

On a double degenerate fourth-order parabolic equation

The existence of solutions to a fourth-order p-Laplacian equation with boundary degeneracy is studied. For the purpose of solving the corresponding non-degenerate (with respect to the coefficient of fourth-order term) regularized problem, a fourth-order semi-discrete elliptic problem with homogeneous boundary conditions is established and its existence and uniqueness are obtained by the functional minimization method. It follows that the approximate solutions of the non-degenerate parabolic problem are constructed and the corresponding existence and uniqueness are discovered by a limit procedure from the energy estimation method and a compactness argument. Finally, the existence and regularity of solutions for the problem with boundary degeneracy is obtained by using a regularization parameter vanishing limit.