Prediction of extrudate swell in polymer melt extrusion using an Arbitrary Lagrangian Eulerian (ALE) based finite element method

Accurate prediction of extrudate (die) swell in polymer melt extrusion is important as this helps in appropriate die design for profile extrusion applications. Extrudate swell prediction has shown significant difficulties due to two key reasons. The first is the appropriate representation of the constitutive behavior of the polymer melt. The second is regarding the simulation of the free surface, which requires special techniques in the traditionally used Eulerian framework. In this paper we propose a method for simulation of extrudate swell using an Arbitrary Lagrangian Eulerian (ALE) technique based finite element formulation. The ALE technique provides advantages of both Lagrangian and Eulerian frameworks by allowing the computational mesh to move in an arbitrary manner, independent of the material motion. In the present method, a fractional-step ALE technique is employed in which the Lagrangian phase of material motion and convection arising out of mesh motion are decoupled. In the first step, the relevant flow and constitutive equations are solved in Lagrangian framework. The simpler representation of polymer constitutive equations in a Lagrangian framework avoids the difficulties associated with convective terms thereby resulting in a robust numerical formulation besides allowing for natural evolution of the free surface with the flow. In the second step, mesh is moved in ALE mode and the associated convection of the variables due to relative motion of the mesh is performed using a Godunov type scheme. While the mesh is fixed in space in the die region, the nodal points of the mesh on the extrudate free surface are allowed to move normal to flow direction with special rules to facilitate the simulation of swell. A differential exponential Phan Thien Tanner (PTT) model is used to represent the constitutive behavior of the melt. Using this method we simulate extrudate swell in planar and axisymmetric extrusion with abrupt contraction ahead of the die exit. This geometry allows the extrudate to have significant memory for shorter die lengths and acts as a good test for swell predictions. We demonstrate that our predictions of extrudate swell match well with reported experimental and numerical simulations.     

Charged spherically symmetric solution in Mikhail-Wanas field theory

A set of coupled differential equations obtained by Wanas in the Mikhail-Wanas generalized field theory is completely integrated.     

Green solid-phase peptide synthesis 4. γ-Valerolactone and N-formylmorpholine as green solvents for solid phase peptide synthesis

Herein, we report the use of γ-valerolactone (GVL) and N-formylmorpholine (NFM) as DMF substitutes in polystyrene based SPPS. The solubility of selected amino acids and coupling reagents were studied in GVL and NFM, followed by their use in the successful synthesis of Aib-enkephalin pentapeptide (H-Tyr-Aib-Aib-Phe-Leu-NH₂) and Aib-ACP decapeptide (H-Val-Gln-Aib-Aib-Ile-Asp-Tyr-Ile-Asn-Gly-NH₂).     

Time Resolved Microwave Interferometry Measurement of the Electron Density in a Pulsed 1,3-Butadiene Discharge

Pulsed plasmas containing organic precursors are becoming increasingly common for multiple applications. To understand the nature of such discharges, in-situ time resolved microwave interferometry measurements of the electron density in a 60 W pulsed inductively coupled 1,3-butadiene discharge have been made. Measurements were also made for continuous wave plasmas at 40, 50, 60 and 70 W power for comparison. The data shows that the time averaged electron densities are independent of pulse width at a particular duty cycle. In addition, time averaged values increase approximately linearly with increasing duty cycle. Such linearity in average density is tied to the ambipolar loss rate. This knowledge is important for understanding the growth kinetics of plasma polymerized films.     

Chlorella minutissima—A Promising Fuel Alga for Cultivation in Municipal Wastewaters

It is imperative to slash the cost of algal oil to less than $50 bbl^?1 for successful algal biofuel production. Use of municipal wastewater for algal cultivation could obviate the need for freshwater and the nutrients—N and P. It would also add CO₂ through bacterial activity. Chlorella minutissima Fott et Nova dominated the entire phycoflora year around and through each stage of the wastewater treatment at the oxidation pond system of Wazirabad (Delhi) in India. The ability to grow so profusely in such varied and contrasting situations made this alga unique. Besides pollution tolerance, it grew heterotrophically in dark under acidic conditions and as a mixotroph in presence of light over a range of organic C substrates. It could utilize both ammoniacal and nitrate nitrogen, survived anaerobicity, 5% NaCl and ?10 bar of osmotic stress. C. minutissima grew at pH 4–11 and raised the pH set initially by 1 to 3 units in 7.5 h. It showed gigantism and largely kept afloat in presence of utilizable organic carbon, while flocculated in mineral medium and on aging. The alga also possessed potential for biofuel production. The studied parameters indicate why C. minutissima was a potential biomass builder in municipal sewage and could be used to determine which other alga(e) may serve the purpose.     

Thermoluminescence characteristics of inorganically and organically capped ZnS:Cu nanophosphors

ZnS:Cu nanophosphors were prepared by wet chemical methods and characterized by X-ray diffraction (XRD). The typical morphologies of the nanophosphors were investigated by scanning electron microscopy (SEM). The thermoluminescence (TL) properties of inorganically and organically passivated ZnS:Cu nanophosphors were investigated after γ-irradiation using a ⁶⁰Co source at room temperature. The TL glow curve of capped ZnS:Cu showed variation in TL peak and intensity as the capping agent was changed. Amongst the synthesized samples the TL glow curve of SiO₂ capped ZnS:Cu showed the highest TL intensity. It has been found that TL response of SiO₂ capped ZnS:Cu is linear in the range 10-550 Gy. A discussion of the obtained results is also presented.     

Ultrasonic degradation of polymers: effect of operating parameters and intensification using additives for carboxymethyl cellulose (CMC) and polyvinyl alcohol (PVA)

Use of ultrasound can yield polymer degradation as reflected by a significant reduction in the intrinsic viscosity or the molecular weight. The ultrasonic degradation of two water soluble polymers viz. carboxymethyl cellulose (CMC) and polyvinyl alcohol (PVA) has been studied in the present work. The effect of different operating parameters such as time of irradiation, immersion depth of horn and solution concentration has been investigated initially using laboratory scale operation followed by intensification studies using different additives such as air, sodium chloride and surfactant. Effect of scale of operation has been investigated with experiments in the available different capacity reactors with an objective of recommending a suitable type of configuration for large scale operation. The experimental results show that the viscosity of polymer solution decreased with an increase in the ultrasonic irradiation time and approached a limiting value. Use of additives such as air, sodium chloride and surfactant helps in increasing the extent of viscosity reduction. At higher frequency operation the viscosity reduction has been found to be negligible possibly attributed to less contribution of the physical effects. The viscosity reduction in the case of ultrasonic horn has been observed to be more as compared to other large capacity reactors. Kinetic analysis of the polymer degradation process has also been performed. The present work has enabled us to understand the role of the different operating parameters in deciding the extent of viscosity reduction in polymer systems and also the controlling effects of low frequency high power ultrasound with experiments on different scales of operation.     

Absence of morphotropic phase boundary effects in BiFeO<Subscript>3</Subscript>–PbTiO<Subscript>3</Subscript> thin films grown via a chemical multilayer deposition method

We report an unusual behavior observed in (BiFeO₃)_1−x –(PbTiO₃) _x (BF–xPT) thin films prepared using a multilayer chemical solution deposition method. Films of different compositions were grown by depositing several bilayers of BF and PT precursors of varying BF and PT layer thicknesses followed by heat treatment in air. X-ray diffraction showed that samples of all compositions show mixing of two compounds resulting in a single-phase mixture, also confirmed by transmission electron microscopy. In contrast to bulk compositions, samples show a monoclinic (M_A-type) structure suggesting disappearance of the morphotropic phase boundary (MPB) at x=0.30 as observed in the bulk. This is accompanied by the lack of any enhancement of the remanent polarization at the MPB, as shown by the ferroelectric measurements. Magnetic measurements showed an increase in the magnetization of the samples with increasing BF content. Significant magnetization in the samples indicates melting of spin spirals in the BF–xPT films, arising from a random distribution of iron atoms. Absence of Fe²⁺ ions was corroborated by X-ray photoelectron spectroscopy measurements. The results illustrate that thin film processing methodology significantly changes the structural evolution, in contrast to predictions from the equilibrium phase diagram, besides modifying the functional characteristics of the BP-xPT system dramatically.