Adsorption of Cu(II) and Zn(II) ions from aqueous solutions onto fine powder of Typha latifolia L. root: kinetics and isotherm studies

Fine powder of Typha latifolia L. root was used for adsorption of copper and zinc ions from buffered and nonbuffered aqueous solutions. The adsorption reached equilibrium in 60 min. During this time, more than 90 % of the adsorption process was completed. The effect of initial pH, initial concentration of metal ion, and contact time was investigated in a batch system at room temperature. The optimum adsorption performance was observed at pH 5.00 and 4.25 for nonbuffered solutions of Cu(II) and Zn(II), respectively, while for buffered solutions it occurred at pH 6.00. The total metal uptake decreased on application of ammonium acetate buffer, from 37.35 to 17.00 mg g^?1 and 28.80 to 9.90 mg g^?1 for Cu(II) and Zn(II) solutions, respectively, with 100 mg L^?1 initial concentration. The pseudo-first-order, pseudo-second-order, intraparticle diffusion, and Elovich models were used to describe the adsorption kinetics. The experimental data followed the pseudo-second-order kinetic model. The biosorption equilibrium was well described by Langmuir and Freundlich isotherm models.     

Application of artificial neural networks for formulation and modeling of dye adsorption onto multiwalled carbon nanotubes

In this study, an artificial neural network (ANN) has been developed to predict the adsorption amount of dye (methylene blue) onto multiwalled carbon nanotubes. Batch experiments have been carried out to obtain experimental data. Important parameters in the adsorption system such as initial dye concentration, adsorbent dosage, temperature, pH and contact time have been used as the inputs of the network, while the output is the final concentration of dye in aqueous solution after adsorption. The neural network structure has been optimized by testing various training algorithms and different number of neurons in a hidden layer. An empirical equation for determination of final dye concentration in aqueous solutions after adsorption has been developed by using the weights of the optimized network. The results of the optimized ANN have been compared with conventional models in equilibrium and kinetic fields. According to error analysis and determination coefficient, the ANN was found to be the most appropriate model to describe this adsorption process. Sensitivity analysis showed that initial dye concentration, pH and contact time are the most effective parameters in this process. The influence percentages of these parameters on the output were 28, 24 and 24 %, respectively.     

Radiosynthesis and biological evaluation of 166Ho labeled methoxylated porphyrins as possible therapeutic agents

¹⁶⁶Ho labeled 5,10,15,20-tetrakis(3,4-dimethoxyphenyl) porphyrin, and 5,10,15,20-tetrakis(3,4,5-trimethoxyphenyl) porphyrin ([¹⁶⁶Ho]–TDMPP and [¹⁶⁶Ho]–TTMPP respectively) were prepared with acceptable radiochemical purity and specific activities. Stability and partition coefficient of the complexes were determined in the final formulations and biodistribution studies in mouse demonstrated high accumulation of [¹⁶⁶Ho]–TDMPP in the lung and liver and less excretion through the kidney. while [¹⁶⁶Ho]–TTMPP was mostly excreted into intestines and kidneys while lungs were a minor accumulation site. In contrast to other reported radiolanthanide labeled porphyrins these two complexes showed less liver accumulation. Further investigation of their potential therapeutic properties is of interest.     

1, 3-dipolar cycloaddition of C-phenyl carbamoyl-N-phenyl nitrone with some dialkyl-substituted 2-benzylidenecyclopropane-1,1-dicarboxylates: theoretical analysis of mechanism and regioselectivity

The regiochemistry of 1,3-dipolar cycloaddition reactions of C-phenyl carbamoyl-N-phenyl nitrone with some dialkyl-substituted 2-benzylidenecyclopropane-1,1-dicarboxylates as dipolarophile was investigated using density functional theory-based reactivity indexes and activation energy calculations at B3LYP/6-31G(d) level of theory. Analysis of the geometries and bond orders at the TS structures associated with the different reaction pathways shows that these 1,3-dipolar cycloaddition reactions occur via an asynchronous concerted mechanism. Analysis of the local electrophilicity and nucleophilicity indexes based on Parr functions only for reaction between 1 + 2a and based on Fukui functions only for 1 + 2b gives correct regioselectivity. The theoretical results obtained in the work clearly predict the regiochemistry of the isolated cycloadducts and agree to experimental results.     

Influence of polymeric coating on capillary electrophoresis of iron oxide nanoparticles

In this work, electrophoresis was successfully used to separate three different polymer-coated magnetic iron oxide nanoparticles with similar sizes (nominally 50 nm) using high-pH borate buffer system. The coating polymers were dextran, polyethylene glycol, or carboxymethyl dextran. The results showed that the migration time of carboxymethyl dextran coated nanoparticles is the longest due to relatively more negative surface charges. Investigation of the effects of buffer concentration, pH, electric field strength and the capillary temperature, on electrophoretic properties of samples was also carried out. The results showed that pH, electric field strength and the capillary temperature had indirect relations with both of the migration time and the separation resolution of three different polymer-coated nanoparticles while the buffer concentration had a direct relation.     

Effect of soil properties on radioactivity concentrations and dose assessment

This study evaluated the correlation between radioactivity concentrations and soil properties, and determined the total annual effective dose near an underground geologic repository for transuranic wastes. Soil samples were collected from two historical monitoring areas (Near Field and Cactus Flats). Alpha-particle spectrometry was used for the analysis of ²⁴¹Am, ^239+240Pu and ²³⁸U, while ¹³⁷Cs, ⁴⁰K, ²³²Th and ²²⁶Ra were detected by gamma ray spectrometry. Higher radioactivity concentrations and stronger positive correlations between radioactivity concentrations and soil properties were obtained in Cactus Flats compared to Near Field. The total annual effective dose was lower than the recommended limit of 1 mSv y^??1.

     

Supercritical CO2-assisted atomization for deposition of cellulose nanocrystals: an experimental and computational study

Nanoparticle spray deposition finds numerous applications in pharmaceutical, electronics, manufacturing, and energy industries and has shown great promises in engineering the functional properties of the coated parts. However, current spray deposition systems either lack the required precision in controlling the morphology of the deposited nanostructures or do not have the capacity for large-scale deposition applications. In this study, we introduce a novel spray system that uses supercritical CO₂ to assist the atomization process and create uniform micron-size water droplets that are used as cellulose nanocrystal (CNC) carriers. CNCs are selected in this study as they are abundant, possess superior mechanical properties, and contain hydroxyl groups that facilitate interaction with neighboring materials. We fundamentally investigate the effect of different process parameters, such as injection pressure, gas-to-liquid ratio, the axial distance between the nozzle and substrate, and CNC concentration on the final patterns left on the substrate upon evaporation of water droplets. To this end, we show how tuning process parameters control the size of carrier droplets, dynamics of evaporation, and self-assembly of CNCs, which in turn dictate the final architecture of the deposited nanostructures. We will particularly investigate the morphology of the nanostructures deposited after evaporation of micron-size droplets that has not been fully disclosed to date. Different characterization techniques such as laser diffraction, polarized microscopy, and high-resolution profilometry are employed to visualize and quantify the effect of each process parameter. Numerical simulations are employed to inform the design of experiments. Finally, it is shown that the fabricated nanostructures can be engineered based on the size of the carrier droplets controlled by adjusting spray parameters and the concentration of nanoparticles in the injected mixture. Process parameters can be selected such that nanoparticles form a ring, disk, or dome-shaped structure. Moderate operational conditions, simplicity, and time efficiency of the process, and use of abundant and biodegradable materials, i.e., water, CNCs, and CO₂ promote the scalability and sustainability of this method.

     

Surfactant-free cellulose filaments stabilized oil in water emulsions

Cellulose - There has been significant interest over recent years in the production and application of sustainable and green materials. Among these, nanocellulose has incurred great interest...     

q value and parent energy optimization using a low-voltage ionization approach increases resolution in linear ion trap mass spectrometry

In this work, the isolation step in the linear ion trap was performed using different “q values” conditions at a low collision-induced dissociation (CID) energy leading to the parent ion resolution improvements, reasonably due to better ion energy distribution. According to the results, we obtained a greater resolution and mass accuracy operating in both traditional electrospray and low voltage ionization near the q value = 0.778 and with a CID energy of 10%. This effect was evaluated with low-molecular-mass compounds (skatole and arginine). The proposed optimization yielded a superior instrument performance without adding technological complexity to mass spectrometry analyses.