气体模型对再入飞行器气动力热环境影响的数值研究

复杂外形再入飞行器的设计,需对气动力热环境进行预测,由于不同的气体模型会对预测的结果产生影响,所以气动设计时就必须考虑这一影响.采用热化学平衡气体模型和双温度热化学非平衡气体模型对复杂外形再入飞行器的气动力热环境进行了数值计算;分析了气体模型对气动力、壁面热流等值线、驻点线平动温度、振动温度、组分质量分数等特征量的影响...     

碱金属激光器问题分析与研究展望

 简要概述了半导体泵浦碱金属激光器(DPAL)的产生背景与独特优势,以其特性为基础、应用为导向,基于国内外最新进展分析了谱线匹配、连续稳定运转和提高输出功率这三大问题,并对新型复合受激态准分子宽带泵浦碱金属激光器(XPAL)的基本原理及优缺点进行了阐述。通过对碱金属激光器现有解决思路进行对比和总结,在能级理论和缓冲气体作用机理、泵浦机理和腔结构以及高功率定标放大等方面,对未来可能的研究方向进行了展望,以期突破DPAL相关技术瓶颈,实现高能量高光束质量的红外激光输出。     

新试剂1-（偶氮苯基）-3-（4,5-二甲氧基-2-苯甲酸）-三氮烯与铜（Ⅱ）的显色反应

研究了1-（偶氮苯基）-3-（4,5-二甲氧基-2-苯甲酸）-三氮烯（ABDMBAT）试剂与Cu（Ⅱ）的显色反应。在TritonX-100的存在下,pH 11.0的Na2B4O7-NaOH缓冲溶液中,该试剂与铜形成红色络合物,ABDMBAT与Cu（Ⅱ）形成的络合物的最大吸收峰位于540nm处,表观摩尔吸光系数ε=8.26×104L.mol-1.cm-1,Cu（Ⅱ）在0—14μg/25mL范围内服从比耳定律。     

中草药透骨草中4种微量元素的形态分析

按照传统煎煮法对中草药透骨草中铜、锌、铁、镁4种元素进行提取;用微孔滤膜分离提取液中的可溶态与悬浮态;利用大孔吸附树脂柱对可溶态中的有机态与无机态进行分离;采用火焰原子吸收光谱法对各种形态中的4种元素进行测定。结果显示,透骨草中4种元素的总提取率在44.03%—63.15%之间,浸留比在79.46%—188.80%之间,悬浮态颗粒吸附率在10%左右。     

An effective surface-enhanced Raman scattering template based on gold nanoparticle/silicon nanowire arrays

A large-scale Si nanowire array （SiNWA） is fabricated with gold （Au） nanoparticles by simple metal-assisted chemical etching and metal reduction processes. The three-dimensional nanostructured Au/SiNWA is evaluated as an active substrate for surface-enhanced Raman scattering （SERS）. The results show that the detection limit for rhodamine 6G is as low as 10-7 M, and the Raman enhancement factor is as large as 105 with a relative standard deviation of less than 25%. After the calibration of the Raman peak intensifies of rhodamine 6G and thiram, organic molecules could be quantitatively detected. These results indicate that Au/SiNWA is a promising SERS-active substrate for the detection of biomolecules present in low concentrations. Our findings are an important advance in SERS substrates to allow fast and quantitative detection of trace organic contaminants.     

Fabrication and measurement of traceable pitch standard with a big area at trans-scale

Atom lithography with chromium can be utilized to fabricate a pitch standard,which is directly traceable to the wavelength of the laser standing waves. The result of a calibrated commercial AFM measurement demonstrates that the pitch standard is(212.8±0.1) nm with a peak-to-valley-height(PTVH) better than 20 nm. The measurement results show the high period accuracy of traceability with the standing laser wavelength(λ /2 = 212.78 nm). The Cr nano-grating covers a 1000 μm×500 μm area, with a PTVH better than 10 nm. The feature width broadening of the Cr nanostructure has been experimentally observed along the direction of the standing waves. The PTVH along the Gaussian laser direction is similar to a Gaussian distribution. Highly uniform periodic nanostructures with a big area at the millimeter scale, and the surface growth uniformity of the Cr nano-grating, show its great potential in the application of a traceable pitch standard at trans-scales.     

Transmission time in the reflectionless complex potential

A phase time definition directly obtained from the Schr6dinger equation is used to investigate the time delay of a particle scattered by complex reflectionless potential. The artifacts introduced by truncating in the numerical simulation are clarified. The time delay of the transmitted wave packet is found to be equal to the reflection time of the truncated potential. Both time delays are the same as the traversal time in the free space, but shorter than the time taken by a classical particle to pass the same potential.     

一种快速暗通道去雾算法

基于暗通道的去雾算法计算初始透射率需要进行大量的数据比较,优化透射率时需要计算融合矩阵,这两个过程耗时巨大,使其难以投入实际应用。针对这一问题,提出了一种快速暗通道去雾方法。首先利用分区最小表的数据结构,提高初始透射率的计算速度;接着,在优化透射率时,采用基于形态学梯度的彩色图像边缘检测算法提取图像边缘信息,减少优化范围,再利用边缘信息与像素的空间信息优化透射率,避免计算复杂矩阵,从而加快了优化速度;最后,运用最小可觉差模型补偿前两个步骤导致的图像画质下降,提高图像清晰度。实验证明,快速暗通道去雾算法在保持恢复图像效果基本不变的基础上,很大程度提高了算法速度。     

高功率高效率光纤耦合半导体激光模块研制

采用光束整形和空间合束的方法,研制出高功率、高效率多阵列光纤耦合半导体激光模块。将波长为976nm连续工作的5个标准半导体阵列,通过对快轴进行准直和快慢轴光束旋转的方式进行光束整形,准直后进行空间合束,经耦合透镜聚焦,耦合入芯径400μm、数值孔径0.22的光纤。测量结果显示:光纤的出光功率最大可达到327 W,光纤耦合效率大于93.6%。     

离子色谱法测定有机肥中Cl-、NO3-SO42-、pO43-的含量

研究了用离子色谱法同时测定有机肥中Cl-、NO3 -、SO42 -、PO43 -的含量.对样品前处理的条件进行优化,Cl-、NO3 -、SO42 -、PO43 -各成分的检出限分别为0.01、0.05、0.05、0.05 mg/L;平均回收率分别为102.4％、99.1％、106.8％、103.5％.时11个实际样品测...